SAK-A-Like / Off Brand Challenge - September
-
Oh wow! Didn't know about the brownie knife also. I was going to bid on a GS knife (green is my favorite color) until I saw that the price went close to $50 pretty quickly. I never checked back to see what it ended up at.
<u>Day 26</u>
I broke out the Gerber Bear Grylls multitool for these next few days. I think the design is cool but the tools can be a bit of a nail breaker. Nothing to write home about but it's a fun one. Used the knife to open some snacks.

-
@BPRoberts said:
Day 25Speaking of can openers, here's FRED, the
smurfing Ridiculous Eating DeviceField Ration Eating Device. Mine is made in China, but they were designed for the Australian military. Just enough spoon to eat with, small/flat enough to fit in a wallet, and a solid bottle/can opener. I suppose the back end could probably make it as a light scraper/pryer/flathead if it had to. I've dabbled with trying to put a (very slight) edge on one side. Not enough to be a "knife" just enough to help it open a box or badly cut a donut or something in portions. It's a nice compliment when I'm carrying a basic folder, and I probably use the emergency spoon 2 or 3 times a year. Kind of reminds me of (but tastes better than) the wooden ice cream spoons one of you mentioned a few days back.Marbles make a version of the FRED that is a little bigger and the spoon has tines and a little depth
Cut a few things with the Crater C33T.
I also mounted an acrylic display case in the basement. I had originally planned to go all brands--but it's almost full of just Matchbox (and only those with actual agencies on them). Thus, I started moving the Hot Wheels emergency vehicles (I don't own that many--mostly Rescue Ranger or Fire Eater) to the smaller Hot Wheels branded display that stayed upstairs. The finer stuff (various vintage brands, German 1:87, Siku, Greenlight, Etc) will go in the china cabinet.
[attach id=0 msg=2545050]
Nice collection
An oddball out of my collection that I don't use.
I've been told it was Soviet-era; and a common pattern of pocketknife over there at the time. The tool on the end of the bottle opener is another type of cork/bottle opener I've read about here, but can't recall the post.
Blade was never sharpened from the factory (in fact, it's blunt). I don't think it's ever been used. Most of the time when you find these, it's from former Soviet Bloc countries for exorbitant prices. I think this one came from a member here--and in the US.
[attach id=0 msg=2545049]
Interesting can opener tool. I’ve noticed many European makers like to do the combo style tool.

-
@AzteCypher said:
Those are some very good looking blue Swizas up there.<u>Day 4</u>
This was my first time using this kind of can opener. I think I would've starved before being able to open a tin can with it. I struggled more than I thought I would. I think I find the dog leg style of can opener easier.

I have to find one of those can openers!

-
Day 26
Opened some new coffee
-
Finally, some can opener action.
[attach id=0 msg=2543572]
It got the job done. The word I'd use is "arduous." I'm not sure if it's not sharp enough, the hardness is a little off, or it's just a bad design. I had to exert too much force with every cut. Pushing away from myself was even worse than pulling towards myself. Perhaps I'll try it again sometime, but it now stands as one of the worst multi can openers I've tried. And yes, I eat counterfeit Spaghetti-Os for breakfast.
[attach id=1 msg=2543572]
And now for something different...
[attach id=2 msg=2543572]
That is a Schrade 707UH. It measures 2.875" closed, and features a clip point blade, scissors, and an itty-bitty bail. If memory serves my correctly, it wasn't in the line very long, so I'm guessing it wasn't a brisk seller. I also believe it was the only Uncle Henry model with scissors. This one was made in USA; I don't know if it was resurrected after Schrade went bust.
I haven't tried a Swiza... Interesting.

-
Day26
Haven't opened a bottle yet...
So today's lunch is fried Spam w/ Velveta on toast with Cajun mayo and a 'Mexican Coke'.jpg)
-
Day 26
RRR Common Stockman
F&F excellent. D2 steel, micarta slabs, brass liners, stainless steel bolsters

-
Day 26
Changing the battery in my wife's car fob. I like the telekinetic adult playing keep away with the kid on the package.

-
Day 27
First time I’ve used the bottle opener on the T4, being thick, thicker than a a SAK for instance, really grips the bottle well, did a very good job

-
Day 27
It is getting down toward the end of the challenge. I have done several challenges this year. I thought about joining in on something next month but decided not to bore people with my daily posts for a while. Still some stress with the hurricane possibilities. After last year, the anticipation is much worse. I guess we will all wait and see. Having two trees down in my driveway after hard rains this week has not been pleasant. How about a foggy morning photo? Best wishes. G:(
[attach id=0 msg=2545089]
-
DAY 27-After a day with the not so Wonder Knife, I'm going with the very SAK-alike Adler.
[attach id=0 msg=2545095]

-
Day 27
I thought I was done with my Ozark Grey. A task requiring scissors needed to be done.
Trim dead blooms off a geraniums hoping to encourage one more bloom session before fall weather frosts.
[attach id=0 msg=2545101]

-
Also, receive email from.a Swiza distributor, examined the listings, the D07 caught my eye!
Locking blade, interesting, scissors appear functional, price

Listing said BLACK, description says RED. If there would have been a BLUE option, I believe I would have pulled the trigger as it would be a nice looking option for pocket carry.
Well not today, tempted, but attention diverted.
D07
[attach id=0 msg=2545108] if curious, plus I thought the email mentioned 15% off too!
-
@Sos24 said:
Marbles make a version of the FRED that is a little bigger and the spoon has tines and a little depthI have one, but I don't recall ever having tested it.
I don't see much fog anymore. That wasn't the case when I lived in the San Joaquin Valley. On at least one occasion, I drove through fog that was so thick that I couldn't see the front half of my hood. And I prefer that to snow.
@LoopCutter said:
Locking blade, interesting, scissors appear functional, price

Day 27
I had plans to take an "SAK-Alike on the Water" photo today, but my best friend in the area decided his energy was best expended on other projects. So you get the "SAK-Alikes and Paracord" photo instead. Awl three blades performed well, but most surprising was the Curve. Its spring-loaded clip is very prone to colliding with the cutting edge when it's pushed to the open position.
[attach id=0 msg=2545145]
![SAK-Alike_Challenge_2025_Day_27[1].jpg](/assets/uploads/_imported_attachments/migrated/590915_SAK-Alike_Challenge_2025_Day_27%5B1%5D.jpg)
-
Day 27 of 30
Today carried T4 but i didnt find any use for it so heres vanity picture
[attach id=0 msg=2545148]

-
Day 27: Vanity pic today :D

-
Day 27
I didn’t really do much today; but I did think about what would happen if all I had on me was the Gerber Armbar and I was in a particularly difficult situation.
I do keep a multitool with pliers in my car for emergencies, and I haven’t encountered an emergency in quite a while. Off the top of my head, what the Armbar is lacking is a screwdriver.

-
Day 27
I didn’t really do much today; but I did think about what would happen if all I had on me was the Gerber Armbar and I was in a particularly difficult situation.
I do keep a multitool with pliers in my car for emergencies, and I haven’t encountered an emergency in quite a while. Off the top of my head, what the Armbar is lacking is a screwdriver.

-
Day 28
One I’d forgotten about but I don’t think counts
the Spiderco clipitoolQuite a cool little knife, but it’s two blades rather than a blade and a tool. The SE is quite saw like but still a SE for cutting boxes and the like.
Anyway here it is with the Armbar

-
<u>Day 27</u>
While the rubberized grips on the Gerber BG aid in getting a good grip on it, I know it will degrade with time.
I used both the blade and the awl today, trying to install a dash camera. I did verify that the blade is plenty sharp when it bit me. I had to use the awl to get the butt splice connector out of my crimpers. The ones provided in the kit were a bit of an odd size.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login