SAK-A-Like / Off Brand Challenge - September
-
Tell me about it Gary! 32 years of carrying just a Huntsman and I find our little gathering place

@IMR4198 said:
I don't remember the demo knife I had with a round opener stud on the screwdriver. I do remember all the blades were stiff. I also had a civvy model. DuraTool or whatever they called them.
You know, Barry? If my Dad hadn't swiped my Cub Scout knife I might not have been in this need to acquire pocky knife mess. One knife would have done me for years and years. At least until I found another one.
In fact, I was happy carrying my Victorinox Trooper until I joined up with this group of wackos. You could set it to music and make a jingle out of it.
I'm a wacko,
You're a wacko,
He's a wacko,
She's a wacko,
Wouldn't you like ,
To be a wacko too?
G
:ahhh -
Day 29: No issues cutting 550 cord!

-
DAY 29 Pete and the Stroh's knife. He says it's a SAK-alike knife with a beer-alike beverage ad.
[attach id=0 msg=2545380]

-
Day 29 of 30
Today used destroyed some boxes with boxcutter, it worked greatly on tapes holding box together.
[attach id=0 msg=2545389]

-
@Noa Isumi said:
Some September ducklings in one of the neighborhoods I work in.
and 
@BPRoberts said:
Is there any particular advantage for carbon steel on non-blade tools? Have any companies made a tool w/ stainless for the drivers, etc. and carbon only for the blades?For the end user, I'm not aware of any advantages. I'm also unaware of any multi that has stainless tools and a carbon steel blade. However, making the JOTS's combo tool out of carbon steel might make purchasing and manufacture easier for GEC.
Day 29
Today's job was removing staples. That's a job best suited to a one-piece tool, with pliers to follow in case any staples weren't removed cleanly. None of my SAK-alikes have pliers. So they had to sit back and watch while a Shard did the work and an MP400 was on-call.
[attach id=0 msg=2545427]
Underneath that Marvel fabric was what I was told would be a piece of mahogany. I was misinformed. The edges had tell-tale signs of being a laminate. At least it will serve its purpose and I got to flick the MP400's pliers. :D
[attach id=1 msg=2545427]
The Armbar Scout did get called upon to open a much-awaited package.
[attach id=2 msg=2545427]
I now have Wi-Fi in the apartment. My obnoxious piece of smurf tablet has been banished to the closet and will soon be out of my life!

[attach id=3 msg=2545427]
![SAK-Alike_Challenge_2025_Day_29_(1)[1].jpg](/assets/uploads/_imported_attachments/migrated/591013_SAK-Alike_Challenge_2025_Day_29_(1)%5B1%5D.jpg)
![SAK-Alike_Challenge_2025_Day_29_(2)[1].jpg](/assets/uploads/_imported_attachments/migrated/591014_SAK-Alike_Challenge_2025_Day_29_(2)%5B1%5D.jpg)
![SAK-Alike_Challenge_2025_Day_29_(3)[1].jpg](/assets/uploads/_imported_attachments/migrated/591015_SAK-Alike_Challenge_2025_Day_29_(3)%5B1%5D.jpg)
![SAK-Alike_Challenge_2025_Day_29_(4)[1].jpg](/assets/uploads/_imported_attachments/migrated/591016_SAK-Alike_Challenge_2025_Day_29_(4)%5B1%5D.jpg)
-
Day 29
The CAMILLUS cross out’s flat blade/cap lifter handled seperating the halves of my remote lock of my truck for a new battery, plus seperating the child proof battery packaging from the battery. Awl with out a new slice mark in my fingers. ☺️
[attach id=0 msg=2545430]

-
Day 29
Next to last day of the challenge, so how about another soda?

-
Day 28
Opened a bag of mini candy bars for a treatDay 29
Opened a block of cheese for some bean and cheese burritos

-
<u>Day 29</u>
Well, my image hosting site is having server issues so it won't let me upload my pics.
Yes, yes, I know.... 
So, use your imagination for now until the site comes back up properly. :D
Picture me using the slide out blade on the Gerber Keystyle to break down a box for recycling. Not the best deployment but it works.
Then picture me cutting a new watch battery off of the rest of the strip so I can bring my watch back to life. Even though the scissors are made by Fiskars, I still prefer my Vic scissors. They just seem to cut that much better.
-
Day 29
No uses today. Just a glamour shot

-
Day 28
Lunchtime, again

-
Day 30: Many thanks to AzteCypher for hosting a really fun Challenge, and to a great group of participants that made for a very fast month!
I had the chance to try out two knives that I kept overlooking, and had a good time doing it. I could carry either one and be in good shape most days.

-
@IMR4198 said:
I don't remember the demo knife I had with a round opener stud on the screwdriver. I do remember all the blades were stiff. I also had a civvy model. DuraTool or whatever they called them.
You know, Barry? If my Dad hadn't swiped my Cub Scout knife I might not have been in this need to acquire pocky knife mess. One knife would have done me for years and years. At least until I found another one.
In fact, I was happy carrying my Victorinox Trooper until I joined up with this group of wackos. You could set it to music and make a jingle out of it.
I'm a wacko,
You're a wacko,
He's a wacko,
She's a wacko,
Wouldn't you like ,
To be a wacko too?
G
:ahhhKey in We’re all Dudes in Good Burger 2 by Less than Jake
Just watched the movie last week. I really like less than Jake
https://youtu.be/xSs7J7O_fl4?si=Pqad8UkOvAUc4ABgOr are you referring to Dr. Pepper
-
Im sad to say im Out: My newer Engelberth Strauß Workpants where sadly a bit "Thigher" on the Pocket, also on the Pocket where the Techtool have to put in, so i did yesterday change it to the Victorinox Climber i think (was this the Model whit only Blade, Small Blade, Skizzors, Can and Bottle Opener, Hook, ) as i can carry it whit the Deep Carry Pocket Clip in my "Messure Stick Pocket" ..
I did use the Böker Techtool this Month though, and i will also keep it for when i have to use it in my Backpack but i did loose the Challenge ..
-
Day 30
Thanks AC thanks awl, lots of great tools, stories and pics everyday, a most enjoyable challenge

I rediscovered quite a few sakalikes over the month having originally thought I’d only use the T4 and Armbar, two tools I like a lot for different reasons
The T4 is solid with a good tool selection, a bit boxy but everything works well
The Armbar disappears in the pocket, less tools but nothing wasted, I like it a lot
Couldn’t do a sakalike challenge without bringing out some of the other genuine army knives out there, so along with the Vietnam war era (1971) Camillus US Army knife, my collection of Aussie and British knives, from 1940’s to 1992, all issued knives….and of course an ADF issued FRED



-
@AzteCypher said:
<u>Day 29</u>Well, my image hosting site is having server issues so it won't let me upload my pics.
Yes, yes, I know.... 
So, use your imagination for now until the site comes back up properly. :D
Picture me using the slide out blade on the Gerber Keystyle to break down a box for recycling. Not the best deployment but it works.
Then picture me cutting a new watch battery off of the rest of the strip so I can bring my watch back to life. Even though the scissors are made by Fiskars, I still prefer my Vic scissors. They just seem to cut that much better.
Well okay, I'm using my imagination now..... I see someone with a curly moustache cutting a box up. Cutting. Cutting. Cutting. Cutting. Oops, he said something naughty.... Cutting. Cutting. Finally finished cutting. Now what is he doing? There is a little package. I can't read what is on it.... Batteries. Those little ones that look like a nickel. Yes, he is trying to open them with a weird little knife. Cutting again. Pulling. He got one out. What is he doing? He's putting one in his mouth..... No, don't do that. Why is he doing that? Now he spit it back out and wiped his tongue with his shirt sleeve. Now his dog wants to try one. He thinks it is a snack. Moustache man won't let him have one. Must have tasted awful. Faaaaadiiing away.:ahhh
-
Day 30
I asked the intrusive (unwanted) AI feature a question of what was the best Bigfoot movie. It directed me to Youtube and a video called the best 5 bigfoot movies. I looked at a few little pieces of that just for chuckles. (the local AI wouldn't let me write chuckles. It insisted on clarification.) Pretty soon I won't have to write anything at all. The AI can take a digital challenge for me and write it up. Post a photo, an annoying report, and sign it with a G and a smiley face. (The Victorinox Spartan is always at your side and ready to spring to your aid to meet any challenge.) Now I ask you.... is that really better than the real IMR post? Something like this.... My Spartan smells funny since I left it overnight in coffee. I think I might need to soak it in hair tonic to kill the stink. Oh yeah, it has a bent blade where some moron tried to pry something. I will try to kink it back in line. Might have to wash my hands afterward. Ick. I used to be able to turn off the AI, but it got tough with me and won't let me now. I will post one more photo of the rather heavy Ruff Rida next to a very much lighter Wenger. The Wenger smells like hair tonic too. I will say that the Rough Rider is made from the finest cutlery steel and choice materials to ensure long life and years of service. Always ready at your side to meet any obstacle.Best wishes.
Gary:(
[attach id=0 msg=2545511]
-
Day 30 of 30
Used Aitor canopener (combo) to tighten cabinet door hinge screws.
[attach id=0 msg=2545512]I gotta say i liked to use T4, Armbar, K502X and Aitor but those 2 clones are bad to use daily since quality isnt best and only tools on those what are usable is blades but i did try to use tools on those 2 clones and they kinda did job but it could be worse to use
[attach id=1 msg=2545512]
Huge thanks to everybody who participated this challenge, it was great to see how everyone used diffrent kind tools to do job.


Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
