The Angler's Club
-
@Jim the Brave said:
I've never done a ton of fishing, but I've never felt that fish scalers did the trick. Always ended up using something else, like the back edge of a knife blade or something. I wonder if the saw teeth might work on some with more pervasive scales.I've always used the back of a knife blade too. I got a cheap bait knife, from a closeout, and it works great,
The only thing I use the scailer blade for is the hook remover -
@FolderBeholder said:
Looking forward to this Angler arriving.
The seller didn't open the tools, so it is a mystery at the moment. Should know the condition by end of week.Nice find, Fobe!

-
After I first read this thread I got to thinking that Victorinox absolutely needs a knife that has pliers, scissors and a scaler/hook remover blade,
I'm thinking about getting a champ and removing the saw and magnifying glass. Id even bet it's something I could even do. -
You absolutely could, and there's plenty of people here who knows how to. Check out the Modder section too!
-
Checking prices on the eBay and realized how much they've gone up on used champs, lately. I actually think it'd be fairly easy to cut the pins right below the liner and simply remove the unneeded layers and re peen the pins.
That being said, y'all realize that I'm a stingy old guy, right?I went rummaging through my old knife cases this morning and found one of my old fishin' knives and that a long with the Gerber Dime from last months challenge will suit me fine until I find the right project piece.
2 knife blades,
Pliers,
Scissors,
Screwdrivers,
2 bottle openers.I about forgot about the package opener too.


-
Fishing is why my son got me my Dime. It's a great fishing tool and a lot easier to clean up too!
-
Wanting to see how a champ mod may look, I got this knock off SAK for free from the Temu. Crappy rendition but it was free.
[attach id=0 msg=2546513]
Doesn't look too bad at first glance. The characteristic scissors hump found on many Chinese SAKs is absent.
[attach id=1 msg=2546513]
Looking down, the tolerances are definitely not there.
[attach id=2 msg=2546513]
The scales were simply glued on and the pins were peened onto the liners.


-
Houston, we have a problem...
Unlike a Victorinox, this SAK-a-like was put together with peened pins on both sides. So after grinding them out I was left picking up the pieces.
In more way than one.[attach id=0 msg=2546515]
Using diagrams from the Internet, I'm in the process of trying to assemble it back into a useable form. The major drawback is the springs are only rudimentarily
Similar to a Vic.I'll post a pic when I get all the blasted pins lined up with the intended holes .
Or IF I get them lined up . ¯\_( ͡° ͜ʖ ͡°)_/¯

-
Did you receive it with that bend in the tweezers?
-
That was fresh out of the box, Farmer.
Progress report.
As the pins were bent, I'm assuming during the assembly at the Chinese SAK alike factory as I can't bend them by hand, I'm up to the last liner.
I'm close...
I'd have liked to do away with all the back tools but don't have the necessary springs to have made it happen. It's getting nearly ready. I'm thinking that a true Victorinox Champ would have been much easier to reassemble but the experience with this one is priceless. I know that I've got some old SAK copies around here, somewhere, that must be over 50 years old. I might have to dig some of them out and see how the build quality was back then.Hopefully I'll have some pics of the final build later today.
-
That Chinese Champ looks a lot better than my Dollar Tree messterpiece with the humpy scissors. After I pried off the scales, I think I would have reached for the stuper glue and put 'em back on. Trying to put that thing back together wouldn't be my idea of having fun. The knife makers over there are certainly capable of making a really good grade SAK copy, if they choose. Taking the Ruike as an example.
Let us know how the project proceeds. Best wishes. G
:) -
Pre-bent tweezers...
Just goes to show how good the real deal is. -
@IMR4198 said:
That Chinese Champ looks a lot better than my Dollar Tree messterpiece with the humpy scissors. After I pried off the scales, I think I would have reached for the stuper glue and put 'em back on. Trying to put that thing back together wouldn't be my idea of having fun. The knife makers over there are certainly capable of making a really good grade SAK copy, if they choose. Taking the Ruike as an example.
Let us know how the project proceeds. Best wishes. G
:)You should hang on to your Dollar store humpy Swiss, Gary. Their prices have gone up to a buck and a half now. My store doesn't have any and the eBay doesn't have any under $10.00.
[attach id=0 msg=2546813]
-
I finished off my rebuild of the Chinese SAK-A-LIKE, last night.
[attach id=0 msg=2546822]
Showing all the tools that I felt were required for my build.What I learned was well worth what I paid for the knife.
(Remember, it was a Temu freebie.)1 - No matter where the peened pins are, grind them all off of the same side.
2 - Be sure to keep the layer parts separate.
3 - Referring to #2, be sure to reassemble the layers in the more or less same order as they sat.
4 - Use some sort of spacer when you rebuild so that the layers don't pinch.
5 - Don't try to tighten up the tolerances when peening the liners back on. Their tools and springs need the extra room.
6 - Chinese SAK pliers suck.All-in-all, I had fun making my own fishing knife.
I now have a pattern which I can show a real modder what I'm looking for in a Victorinox rebuild.
It's now going into my fishing sling bag and hopefully see some use.
-
I didn't realize I had made such a good investment. There haven't been any of those knives at my local Dollar 'n a Half Tree for years. I had a Q-Star that was very similar. Seems like the Q-Star was better quality. Not a lot better, but still..... Just think what it would be worth now.
Best wishes. G
:D
I just saw your ChiCom Champ build, Pit. It is just beautiful. You are ready for the big time now. Wowsers. -
Well, I got another one of the freebie SAK copy from the Temu. Got plans on doing another rebuild after I learned what not to do on the last one.
-
Having more trouble putting the latest one back together. Took extra care to keep all the layer parts together to get them back right.
Project is on hold until I can figure out the problem.
On a positive note, I found a naked Sabre Ireland fishing knife on the eBay. Good snap, still, and even has a fairy decent edge. The only downside to it is it's missing the bolsters and scales. So... My choices are to either use it as is or try to make a set of scales out of something different. I'm actually thinking of some hardened leather.
It's looking like a long winter,..

-
I've be toying with the second SAK copy for a bit now.
I've been sure to keep the layer parts together but it's not going like the first one did. Every time I get a couple layers built the springs want to pop off of the respective tool.
I'm not giving up, but I put it on the back burner for a bit.After playing with the Sabre knife for a little bit I realized that while it was perfectly usable as it was , I wanted it to feel more comfortable to use. So, I decided to make a set of scales for it . Always liked the color of oak...
[attach id=0 msg=2552752]
Finished ít up yesterday.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
