Soldier On! 2026
-
@BPRoberts said:
Dan, could you take a look at this list and see if I'm missing anything (or added one I shouldn't?)I think you got nearly everything.
A can has been opened, and the worms are now wiggling around on the deck. I'm afraid Nix is going to come out of hiding for the sole and express purpose of kicking my ass. :ahhh :ahhh :ahhh
I'll do my best to sum it up briefly. For acceptance in this challenge, I'll require solid proof that a knife not listed in General Order No. 2 was:
[list type=decimal]-
Issued to individual members of a military
-
Issued to units/departments/divisions/work-centers/etc.
-
Available for procurement through government channels
-
Given a government stock number
(Note that it is entirely possible that knives issued a government stock number may have been planned for issue or procurement but never got to that point. As anyone who's been a government employee or contractor is likely aware, there are endless possibilities as to why that may happen.)
@Barry Rowland said:
I'd love to see the Swiss Champ admitted in!The jury is still out on those two, as I haven't seen solid proof that they satisfy requirements for the challenge. The same is true of many of the "9001 weird 111mm variants" mentioned by BPRoberts. If you can provide the requisite proof for a knife you'd like to use, it will be allowed. I have a good idea who might have the proof, or at least a good idea of where to look, but I won't mention his name just yet.
The civilian equivalent part of the equation is a little easier to solve. If the functional differences between a civilian model and its nearest military equivalent are minimal or nonexistent, it's a go. For example, keyring vs. lanyard tube vs. neither of those on a Pioneer is a very minor difference from a Pioneer. Similarly, a one-hand Trekker with a combo edge and no scale tools is functionally identical to a 2008 Soldier. The Pioneer X's scissors present a significant functional difference compared to a 1961 Soldier. The same is true for the corkscrew on the SwissBianco Soldiers. Likewise, an Outrider would be functionally different enough from the Malaysian Army Knife, as the former has a corkscrew and the latter has a back-layer Phillips.
Things seem to have gotten more complicated than I figured they would. In an effort to remove another possible complication, this challenge will be restricted to knives produced in Switzerland.
My intent was to clear things up, rather than further muddy the waters. I hope I succeeded.
-
-
I think I'll wait for the dust to settle on people finding NSNs, paperwork, etc. then try to provide a "definitive" list when we get closer. Currently leaning towards either going awl the way back and taking my '43 or doing a 111, since I don't think I've ever carried one of those for a whole month (or 3) and I've done the 108s and multiple 93/scout challenges. Did some poking around to try and look at NSNs, but didn't have much luck (hard to tell which knife, pocket is which). Did see a listing for an Atlas, which I'd never heard of anyone issuing.
-
@Farmer X said:
I think you got nearly everything.A can has been opened, and the worms are now wiggling around on the deck. I'm afraid Nix is going to come out of hiding for the sole and express purpose of kicking my ass. :ahhh :ahhh :ahhh
I'll do my best to sum it up briefly. For acceptance in this challenge, I'll require solid proof that a knife not listed in General Order No. 2 was:
[list type=decimal]- Issued to individual members of a military
- Issued to units/departments/divisions/work-centers/etc.
- Available for procurement through government channels
- Given a government stock number
(Note that it is entirely possible that knives issued a government stock number may have been planned for issue or procurement but never got to that point. As anyone who's been a government employee or contractor is likely aware, there are endless possibilities as to why that may happen.)
The jury is still out on those two, as I haven't seen solid proof that they satisfy requirements for the challenge. The same is true of many of the "9001 weird 111mm variants" mentioned by BPRoberts. If you can provide the requisite proof for a knife you'd like to use, it will be allowed. I have a good idea who might have the proof, or at least a good idea of where to look, but I won't mention his name just yet.The civilian equivalent part of the equation is a little easier to solve. If the functional differences between a civilian model and its nearest military equivalent are minimal or nonexistent, it's a go. For example, keyring vs. lanyard tube vs. neither of those on a Pioneer is a very minor difference from a Pioneer. Similarly, a one-hand Trekker with a combo edge and no scale tools is functionally identical to a 2008 Soldier. The Pioneer X's scissors present a significant functional difference compared to a 1961 Soldier. The same is true for the corkscrew on the SwissBianco Soldiers. Likewise, an Outrider would be functionally different enough from the Malaysian Army Knife, as the former has a corkscrew and the latter has a back-layer Phillips.
Things seem to have gotten more complicated than I figured they would. In an effort to remove another possible complication, this challenge will be restricted to knives produced in Switzerland.
My intent was to clear things up, rather than further muddy the waters. I hope I succeeded.
Can you clarify what’s you intend by #3 - available for procurement through govt channels?
As I understand it, a PX is a government run thing, and you can get all kinds of non-issued items there, which I would assume includes SAKs. I doubt this is what you had in mind, so I figured I’d ask.
-
For the 2022 Soldier On Challenge I carried my OHO Trekker, which was allowed.
-
@gustophersmob said:
As I understand it, a PX is a government run thing, and you can get all kinds of non-issued items there, which I would assume includes SAKs. I doubt this is what you had in mind...You are correct. An Exchange was not at all what I had in mind. I should have added "for official use," "under a government purchase order," or a similar statement to criterion 3. And I don't remember ever having seen SAKs on offer at any of the Navy Exchanges, or either of the sip's stores, I visited during my service.
-
I have reached out to senior leadership regarding General Order No. 9. When they have issued forth their ruling, it shall be posted here. I don't anticipate enlistees who already have the 90-day Soldier badge having any difficulty earning another badge or badges while participating in this challenge.
@BPRoberts said:
Did see a listing for an Atlas, which I'd never heard of anyone issuing.Can't believe I missed that earlier. I've never heard of an Atlas being issued, either. That could be one of those deals that fell through in the 11th hour. Where did you run across that particular listing?
-
Speaking for myself, I'm doing it because it gives me a chance to use a 111 and have some fun with some really good people!
-
How about SwissTool and MP600 models what has been issued by military?
-
@Barry Rowland said:
Speaking for myself, I'm doing it because it gives me a chance to use a 111 and have some fun with some really good people!
on both counts.@Antti Lammi said:
How about SwissTool and MP600 models what has been issued by military?While it is a nice idea, and SwissTools and MP600s have unquestionably been military issue, the spirit of this challenge is knife-based tools only. Though a military-themed challenge for pliers-based multis is a good idea.

Senior leadership has set forth a ruling, and General Order No. 9 is modified accordingly.
General Order No. 9:
As this is a 90-day challenge, there is a possibility that enlistees may be able to earn 30-day challenge badges while participating in the Soldier On! challenge. Enlistees who do not have the 90-day Soldier badge and seek to earn it shall not request another badge during the course of operations. e.g, an enlistee carrying a Pioneer may not attempt to earn the Minimal SAK challenge badge in March while the 90-day Soldier challenge is ongoing. However, enlistees who have previously completed the 90-day challenges may earn other badges in concurrent challenges, provided use of the enlistee's chosen Soldier Knife is accepted in another challenge. e.g, I will be using a U.S. Combat Knife, so I will be eligible to earn the Combo Edge badge if that challenge is run in February.The challenge host will defer to senior leadership (i.e. the moderating team) for an official position. General Order No. 9 is subject to modification or cancelation at senior leadership's discretion.I am also adding General Order No. 10: Enlistees who, for whatever reason, feel they may not be able to complete a 90-day challenge are welcome to join in for 30 days and earn the 30-day Soldier badge. We shall call such enlistees "reservists."

-
For what it's worth, I think limiting it to the "core" models (1890, 1951, 1961, 2008, and maybe the 111 GAK) and their civilian versions is more than reasonable.
-
That, plus the RAF Hunter, makes for a good comprehensive list. General Order No. 2 is hereby amended (amendment bolded).
General Order No. 2: Participants shall carry and use one, and only one, Soldier knife for the duration of operations. Permissible models include all officially issued Soldier knife models from 1891 through 2008. Also permitted are Victorinox Pioneers, GAKs (108mm), OHO GAKs (111mm), and DAK’s (111mm). The "U.S. Combat Knife" and RAF Hunter are likewise permitted. Civilian models may be allowed if they
do not differ substantially fromhave layer tools identical to their officially issued counterparts. (If your intention is to use such a model, please be sure that it will be accepted before you enlist.) As this is a challenge for knife-based tools, pliers-based tools shall not be permitted.I reviewed much of the link in BPRoberts' above post. Sure enough, it lists "Victorinox Atlas" as having NSN 5110-43-001-1609, so I Googled it. Only one hit was returned. Based on the preponderance of evidence standard, I believe there is more than enough reasonable doubt that the Atlas was available through any government channel save for an Exchange. It was also surprising to see an NSN for a Leatherman Juice CS4, which is not what springs readily to mind when I picture a military multi-tool. Yet it's unsurprising on the basis that just about every Leatherman under the sun (as well as a good many Gerbers) will have an associated NSN.
-
-
Phil, thank you for the one you sent my way so long ago. It's my favorite 111! You have a beautiful collection of them!
@Fast Bill said:
If it helps the RAF Hunter was, as I've read online, part of an RAF helicopter emergency pack and it's NSN was 27C/7018504 marked on the main blade. -
-
@Barry Rowland said:
Phil, thank you for the one you sent my way so long ago. It's my favorite 111! You have a beautiful collection of them!My pleasure Barry, I can't think of a more deserving home and you'll always have more chance to carry than me I reckon.

-
-
I could join this challenge with 108mm GAK or 111mm GAK.
-
-
@Mattexian said:
I believe that refers to the currently available Vic OHT with blacked out blades and the OD dual density scales, featuring a bold U.S. stamped on the scales.You are 100% correct.
@Antti Lammi said:
I could join this challenge with 108mm GAK or 111mm GAK.I'd love to have you join in!

-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
If I weren't broke and Royal Mail weren't being smurfholes, I'd be tempted to see about a deal...
Is anyone else prepared to sign their name on the dotted line?