Fixed Blade Challenge October
-
-
@AzteCypher said:
I'm going to borrow Farmer X's idea.
Day 9
I'm anticipating a no-use day, so here's the Civet browsing MTo.
[attach id=0 msg=2546955]
![Fixed-Blade_Challenge_2025_Day_9[1].jpg](/assets/uploads/_imported_attachments/migrated/591527_Fixed-Blade_Challenge_2025_Day_9%5B1%5D.jpg)
-
Day 09
The Lionsteel H1 in the garden. No use today, yet.

-
Day 9
The Syphon sticks out of my pocket a bit more than the G-Necker.

-
Day 9
Condor Hudson Bay knife.
[attach id=0 msg=2546994]

-
Catch up Day 8
Went back to the Becker Necker Number 11, it's becoming a favorite. Used the spine to throw sparks with the fire starter from Harbor Freight.

-
Day Nine.
Opened up some ammo with the Becker for my 1911
Gave the knife a quick wipe down with some oil.

-
Day 9
Glamour shot of the Sugar
-
<u>Day 9</u>
Broke down a lot of boxes for recycling today. Gave the blade a quick hone after that card board cutting and it was good to go for more.

-
Day 9
Buck Paklite Cape w/ the Hide. It's a smidge longer. I prefer the Hide as a general EDC for the meatier blade.

-
@Alan K. said:
The Lionsteel H1 in the garden.Is it decked out in Micarta?
I like the look of that one!
@Pacu said:
Went back to the Becker Necker Number 11, it's becoming a favorite.I can see why!


@BPRoberts said:
Buck Paklite Cape w/ the Hide.Do you happen to the name of that paracord pattern?
Before I post today's photo, I have to give a
to gra_farmer for inspiring my Day 10 post in the Spartan challenge!Day 10
Before joining MTo, mail addressed to a generic recipient was merely a nuisance.
[attach id=0 msg=2547110]
It's not as big a nuisance now, as it presents opportunities for challenge photos. :D It's even better when the mailpiece in question is not your typical plain bond paper. Expect to see more of this glossy, thick stock as the challenge progresses.
[attach id=1 msg=2547110]
![Fixed-Blade_Challenge_2025_Day_10_(1)[1].jpg](/assets/uploads/_imported_attachments/migrated/591572_Fixed-Blade_Challenge_2025_Day_10_(1)%5B1%5D.jpg)
![Fixed-Blade_Challenge_2025_Day_10_(2)[1].jpg](/assets/uploads/_imported_attachments/migrated/591573_Fixed-Blade_Challenge_2025_Day_10_(2)%5B1%5D.jpg)
-
Day 10
Spyderco Ronin 2

-
Day 10
Pacu's story on acquiring the most excellent BK-11 reminded me of how I got this Explorer Tanto. It was around 1990, and I was on a road trip, heading about 10 hours north to St. Augustine Florida for a long weekend of celebrating the history of the longest continuously occupied settlement in North America with my reenactment group. I was dressed as a trapper, and the rest of the group were pre-revolution British Redcoats, and we had been invited to what they call the Grand Illumination. It's called that because each evening ends with a candlelight parade around the historic district. Anyway, I realized about an hour from home that I had forgotten to drop a knife in my pocket and it wasn't worth turning around. When we got to St. Augustine, we set up camp and went to an apothecary to buy some sunscreen and mosquito repellent. The apothecary was like an old timey Woolworth's with a lunch counter and everything a tourist could need, including... a display case full of knives. I was looking for something different that would remind me of the trip. Everything was the typical, "gas station folders" except for a few fixed blade knives. The counter guy said he was dying to get rid of the Explorer Tanto and offered it to me at the clearance price of $10. It appeared solid enough so I said I would take it. When he opened the cabinet, he discovered he actually had 2 of them and offered me both for $15. I needed a knife, but I didn't need two knives, so I declined. Been kicking myself for that for the last 35 years. The Explorer Tanto thus became my first EDC fixie, as it was in my possibles bag all day while dressed out, and on my belt when we went out for the evening in regular clothes, for the entire 3 nights and 4 days. The 440 stainless doesn't hold an edge, but I've beat the hell out of this knife, and it doesn't show any abuse. Pictured here with the SOG Powerpint.


-
-
Day 5:
I've got the photos on the PC, but kinda forgot to post them here...
Butcher knife, thin blade version.
Made by my great-Granddad during the Depression. Handles--walnut with copper pins. Blade--said to be an old crosscut saw.
[attach id=0 msg=2547153]

-
Day 6:
Opened up this year's Lowe's/Kobalt Christmas pliers set.
Like last year you get copies of the 125mm Cobra and 150mm Pliers Wrench, but they've added a 6" Twin Grip clone as well.
NOT Knipex quality, but cheap enough to buy bulk and use without fearing breaking or losing an expensive tool.
Been meaning on trying Workpro's 100 and 125mm Cobra clones as well. Thinking the 100mm will be great for farm work due to the tether hole for the lanyard.
[attach id=0 msg=2547154]

-
Day 7:
Fiskars Puukko.
Guessing '60s or '70s era--you don't see them nearly as much as the fillets. 4" and 5" blade models were made--mine is the 5". Got it cheap as the seller listed it as the fillet.
[attach id=0 msg=2547155]

-
Day 8:
No use.
[attach id=0 msg=2547156]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



