New locking SAKs coming?
-
@Farmer X said:
the package opener is something I have zero use for.@gustophersmob said:
The package opener has no appeal to me, especially on a tool that has a blade.
-
I like the one with scissors and will buy one if it becomes available.
-
Can confirm from a reliable (non-reddit) source that locking Alox is in the pipeline. Did not hear anything about specific models, but I'd guess these are legit. Seems unlikely that someone would go to all the trouble of faking something "almost" real.
-
@gustophersmob said:
I think I’ve opened a can with a SAK maybe twice in over 30 years of knife use, but I use that tool all the time. It’s basically a metal fingernail.I agree, which is one reason why I don't like the combo tool as a substitute for the opener layer. Just in the last couple of days I have used the tip of it to lever out some button batteries that needed replacing in a toy, and to pry a jam jar lid so as to let air in and make it easy to open.
@gustophersmob said:
And I’d be afraid to use the screwdriver tip. If that folded on you while using the SD, it’d be a nasty wound. I suppose you could choke up in the tang, but that would make it even more awkward to use.You can just hold the body of the knife further down, so if it folded it wouldn't touch your finger?
-
@BPRoberts said:
Can confirm from a reliable (non-reddit) source that locking Alox is in the pipeline. Did not hear anything about specific models, but I'd guess these are legit. Seems unlikely that someone would go to all the trouble of faking something "almost" real.That’s good confirmation. I was pretty convinced they were real anyway. A sit in France and Sweden had them on their webpages (now taken down), plus the picture from the French store. Seems too much for someone to fake.
-
@fullbreakfast said:
You can just hold the body of the knife further down, so if it folded it wouldn't touch your finger?Ah, that’s a good thought. Don’t know why that didn’t occur to me

-
@gustophersmob said:
Ah, that’s a good thought. Don’t know why that didn’t occur to me
Still not a perfect solution, as you have to remember to do that!I have got one of the Alox knives that has the package opener, and I haven't made my mind up about it yet. So far it seems like I can do the things with it that I'd use the can opener for, which doesn't include opening cans. I'm not sure if it's an improvement, but for my purposes it doesn't seem a lot worse.
I haven't used it much for opening packages, because I always carry a small utility blade which is just better for that.
-
Speaking from my position on the Fellowship of Chronic Tool Droppers, one boo boo and the skeletonized parts would put some tool out of order. They have definitely made the ends of the SAK weaker, more susceptible to damage, not to mention dirt like our plumber friend stated. Likewise I am a non-removable pocket clip hater. Looks cool. Just not for me.
Best wishes. G
:ahhh -
Always glad to see new tools, though for me nail files and the hook are tied for the most useless tools on a SAK.
-
@Old Boy said:
Not locking. But is this new?
https://www.victorinox.com/en-US/Barista-Tool/cms/barista-tool/?utm_source=Klaviyo&utm_medium=email&utm_campaign=101025 La Marzocco Barista Tool US-EN&bxid=WWhFQB&_kx=rWQjWT7VBDM5j4txon8JlzExv5bYmtr3vXK0CdvXZZY.PiLj3FCoffee spatula!!!!
-
@Old Boy said:
Not locking. But is this new?
https://www.victorinox.com/en-US/Barista-Tool/cms/barista-tool/?utm_source=Klaviyo&utm_medium=email&utm_campaign=101025 La Marzocco Barista Tool US-EN&bxid=WWhFQB&_kx=rWQjWT7VBDM5j4txon8JlzExv5bYmtr3vXK0CdvXZZY.PiLj3FYes, coffee spatula and nozzle wrench make it $145 coffee barista’s tool.
-
@LoopCutter said:
Yes, coffee spatula and nozzle wrench make it $145 coffee barista’s tool.Compared to the prices of the La Marzocco espresso machines it is a steal :o
https://www.lamarzocco.com/it/en/product-category/espresso-machines/home-espresso-machines/ -
Looks like they are really designing it for the urban carry role. Cut outs in scales would let in dirt and dust, but in urban/office uses that isn't going to be as important. You are also going to save some weight, which is really nice. Locking blade and pocket clips are features people have been asking for for ages, so its nice to finally see them included.
I just wish they would start putting out models with plus scales and not just alox models. For urban carry the scale tools are all nice to have
-
@gustophersmob said:
From a Reddit post here:
https://old.reddit.com/r/victorinox/comments/1o2qfvv/3_new_models_with_a_locking_blade_coming_out_this/There’s a photo in the comments of them at a Swiss shop, so it seems real.
Maybe this will tamp down on all the, “victorinox doesn’t innovate” talk. Though, I’ll be honest, I’m not 100% sure I like them.
I do like the addition of the nail file to what appears to be a 93mm frame. Though the loss of the awl would be a big bummer.
Don’t personally need/want the package opener.
I can see why the lock would be popular, but I don’t need it either. And the proof will be how difficult it is to use, especially if the backspring is as strong as the current 93mm.
I don’t like the skeletonized scales. At all. Talk about a lint magnet. And without being able to take it apart to clean, if this allows more dirt into the pivots it could be a real issue.
Either way, I’m genuinely interested to get one of these in hand.
I would imagine the holes in the scales could make cleaning a lot easier. Just run it under a faucet for a few seconds, dry it off, then you have these nice holes to oil it with
-
@Richard Zheng said:
I just wish they would start putting out models with plus scales and not just alox models. For urban carry the scale tools are all nice to haveI know what you mean, but as an urban SAK warrior who has been mostly Alox for some years: office people are carrying a backpack / briefcase / crossbody bag or similar, in which a Swiss Card with these things and more can readily be stashed. Personally I have a pocket pouch that acts as wallet and EDC stash, containing my SAK (more often two) and a Swiss Card.
-
@Old Boy said:
Not locking. But is this new?
https://www.victorinox.com/en-US/Barista-Tool/cms/barista-tool/?utm_source=Klaviyo&utm_medium=email&utm_campaign=101025 La Marzocco Barista Tool US-EN&bxid=WWhFQB&_kx=rWQjWT7VBDM5j4txon8JlzExv5bYmtr3vXK0CdvXZZY.PiLj3FYes!
Also, thank you, because your link resulted in this:
[attach id=0 msg=2547149]
-
Did you already order? If you add $2 more you get free shipping.
-
@Old Boy said:
Not locking. But is this new?
https://www.victorinox.com/en-US/Barista-Tool/cms/barista-tool/?utm_source=Klaviyo&utm_medium=email&utm_campaign=101025 La Marzocco Barista Tool US-EN&bxid=WWhFQB&_kx=rWQjWT7VBDM5j4txon8JlzExv5bYmtr3vXK0CdvXZZY.PiLj3FIt is. I just got an email for it today.
As far as the locking SAK. I'd pick one up based on the coolness factor pending how much they'll be going for.
-
I can see that spatula being used for....ahem.....something else more nefarious. Probably can't say due to forum rules.
But back to the alox, yeah the scale cut outs and package opener make this a pass for me. But I can't wait for the modders to get their hands on these.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login