Fixed Blade Challenge October
-
So sad!

-
Your Cleaver style slicer reminded me of a Knaxe I saw before.
Rax nax is correct name by CRKT
https://www.crkt.com/knife/razel-nax-fixed-blade-with-sheath?srsltid=AfmBOooC2kMR8qeE5qFOpY7NXf_huqlRNrKkQ84IpPR0OqCoC7gtfIsi -
@nate j said:
TOPS BOB FieldcraftI like that one! It would be interesting to compare it side-by-side with a Garberg.
Day 19
Yesterday I said that I have no issues with the Garberg's sheath. I guess that is correct, but I do have a knock on the belt loop attachment. It flops around more than I'd like. But it does allow every part of the knife and sheath to ride below the top of my belt, as I prefer.
[attach id=0 msg=2548417]
I'm also not overly fond of the rather small lanyard hole. Yes, 550 cord can pass through it, but 325 is a better fit, in my opinion.
[attach id=1 msg=2548417]
.jpg)
.jpg)
-
Day 19
Schrade 152OT with pipe and Medico pipe knife.


-
@LoopCutter said:
Your Cleaver style slicer reminded me of a Knaxe I saw before.Rax nax is correct name by CRKT
https://www.crkt.com/knife/razel-nax-fixed-blade-with-sheath?srsltid=AfmBOooC2kMR8qeE5qFOpY7NXf_huqlRNrKkQ84IpPR0OqCoC7gtfIsiPart of the same family, they've got 5 or 6 models. I prefer mine since I think having 3 different "blades" is very practical.
Day 19
Mora Basic 511. Sometimes you can't beat the classics. Knife Center likes to give these as a promo.

-
Day 19
A utility knife would have worked, but the Sugar made small work cutting down some boxes.
-
Day 19
Used the mini to cut off the armband from last night at the oktoberfest.
[attach id=0 msg=2548483]

-
Day 15:
No use:
[attach id=0 msg=2548484]

-
Day 16:
Mora Basic--I think this was the 125th Anniversary version. If I'm not mistaken, this was at the same time, one of the annual "colors" knives. 2018 or 2019.
[attach id=0 msg=2548485]

-
Day 17:
Ozark Trail. I bought this one a couple months back.
[attach id=0 msg=2548486]

-
Day 18:
[attach id=0 msg=2548488]

-
Day 19:
[attach id=0 msg=2548489]

-
-
Day 20
The Garberg took its turn with the card stock today.
[attach id=0 msg=2548584]
The first cut was a clean, fast, and complete slice. A second cut had to be made for an action shot. Overall, I'm pretty happy with the Garberg.
[attach id=1 msg=2548584]
.jpg)
.jpg)
-
Day 20
We've reached the 2/3rds mark in this October challenge and we still haven't seen anyone carving a pumpkin, gourd, turnip, or other vegetables. If you haven't already got it, the Jack-o-lantern badge is one of the few you can claim during another challenge and it's only available before Halloween.
Today I'm carrying the ESEE JG3 with a SOG Powerpint, but that doesn't seem quite right. The JG3 is all business and feels like it should be paired with a more serious multitool such as the Surge.


-
Day 19
Esse PR4 and some more Glock magazines. When I bought my 43x MOS the guy behind the counter handed me a weighty Glock box after paperwork and purchase. I opened it before leaving to make sure numbers matched paperwork. Inside the box was a Glock 34. I bought the 43x at 419. Guy handed me a 650-700 dollar at the time double stack big Glock. Slight error. :ahhh
Sir, I think there is a problem.


-
Day 20
I think I may order some liners to make the handle slightly thicker. Esse PR4
Used the PR4 to open some tractor oil today and pop the lid on Mexican mineral water Topo


-
Day 20
I often see Mora's recommended as first knives. Cheap, durable, and a fixed blade is easier to handle in some ways than a folder. This Scout is the "official" kid friendly Mora, available with both pointy and safety tip. I know 10 year old BPRoberts would've thought that cross guard was really cool, because 36 year old BPRoberts still likes it.

-
Day 19
@Farmer X said:
I like that one! It would be interesting to compare it side-by-side with a Garberg.Ask and ye shall receive!
Both are straight, Scandi-inspired blades. I say Scandi-inspired because they are both really flat saber grinds with secondary bevels, not true Scandi grinds.
The Garberg features 14C28N steel, while this version of the Fieldcraft uses 154CM. The Fieldcraft’s blade is longer, wider, and thicker than the Garberg’s. The Fieldcraft also has thumb jimping on the spine, while the Garberg has none.
The Garberg has a polymer handle, while this version of the Fieldcraft features red & black G10 slabs.
The Garberg weighs in at a relatively svelte 6.1 oz (7.1 oz with sheath). The Fieldcraft comes in at a beefy 10.7 oz (13.6 oz with sheath).
The Garberg’s sheath isn’t awful, but is pretty basic. I would be hesitant to carry it without the retention strap. As FX noted, it is ambidextrous.
The Fieldcraft sheath is very well done. The kydex locks the knife in firmly with zero rattle, and it easily passes the shake test without any sort of secondary retention. However, the knife remains relatively easy to draw, thanks in part to a small thumb ramp on the sheath. The strong spring steel clip is large enough to accommodate up to a 2” belt or pack strap, and rotates to allow the knife to be carried at any angle. This sheath also features a firesteel loop, and in fact the knife came with a small firesteel & whistle. Sadly for you lefties, this sheath is designed for RH only.
As of this writing, the Garberg seems to be going for about $90 while the Fieldcraft is around $240.
So, which do I think is better? I have to admit a preference for the Fieldcraft, thanks to a more comfortable handle and the aforementioned excellent sheath. But if you’re on a budget and or looking to save weight, the Garberg won’t let you down.




Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
