Show Us Your EDC gear!!!
-
@nate j said:
Looks like a solid little kit!

Seems like maybe a lot of redundancy between the two Alox SAKs?
Thanks!
There isn’t the redundancy you might think with the SAKs, because the 93mm on the left is the new one that just has scissors, and the 84mm is the Cadet with main blade, opener layer and nail file.
It’s a fair question why I’d carry these two instead of just a Pioneer X, which has previously been an EDC of mine. That covers the same tools but with an awl instead of the file and bigger blade and openers. I also don’t really need the file, as there is one in the Swiss Card. The reason is: thickness. The Companion X Alox (scissors SAK) is 10mm thick and the Cadet is 8mm, where the Pioneer X is 15mm. It doesn’t seem like a lot, but to me the Pioneer X makes the pouch too thick - I want it to drop into my jeans pocket not have to be stuffed in, and not make too big of a lump when it’s in there. Also, splitting the SAKs across the front of the pouch makes it feel balanced, flat and tight in the hand, which is nice. Weight wise the difference is marginal - the dual SAKs total 90g against the Pioneer X at 94g.
Another option would be to swap out the two alox SAKs and the SwissCard for a Climber. But the Climber is 18mm thick, so that rules it out even with saving the 4mm thickness of the card. Plus I’d lose the small scissors from the card, which I like for nail care (the big ones aren’t great for cutting nails I find) and the files. Though that problem could be solved by adding an Alox Classic SD, the 58mm scissors being the very best for cutting nails. I also like having the card in the back section of the pouch as it gives it a feeling of rigidity and structure that I find pleasing.
Yeah, I do spend too much time thinking about stuff like this.
-
@fullbreakfast said:
Thanks!There isn’t the redundancy you might think with the SAKs, because the 93mm on the left is the new one that just has scissors, and the 84mm is the Cadet with main blade, opener layer and nail file.
It’s a fair question why I’d carry these two instead of just a Pioneer X, which has previously been an EDC of mine. That covers the same tools but with an awl instead of the file and bigger blade and openers. I also don’t really need the file, as there is one in the Swiss Card. The reason is: thickness. The Companion X Alox (scissors SAK) is 10mm thick and the Cadet is 8mm, where the Pioneer X is 15mm. It doesn’t seem like a lot, but to me the Pioneer X makes the pouch too thick - I want it to drop into my jeans pocket not have to be stuffed in, and not make too big of a lump when it’s in there. Also, splitting the SAKs across the front of the pouch makes it feel balanced, flat and tight in the hand, which is nice. Weight wise the difference is marginal - the dual SAKs total 90g against the Pioneer X at 94g.
Another option would be to swap out the two alox SAKs and the SwissCard for a Climber. But the Climber is 18mm thick, so that rules it out even with saving the 4mm thickness of the card. Plus I’d lose the small scissors from the card, which I like for nail care (the big ones aren’t great for cutting nails I find) and the files. Though that problem could be solved by adding an Alox Classic SD, the 58mm scissors being the very best for cutting nails. I also like having the card in the back section of the pouch as it gives it a feeling of rigidity and structure that I find pleasing.
Yeah, I do spend too much time thinking about stuff like this.
Great write up!

-
You Folks and your EDC kits, are just awesome!
It's you and your intrepid use of these kits, that extinguish enough unforseen spotfires, to keep our world spinning !
Never say die!
-
Although retired, I'm still a husband, a Tata (granPa), and Tío (uncle), to teenage boys. The buck still stops at my door.
Present state of my EDC's evolution:
-
My EDC "stuff" does tidy up quite well:
Skeletool is light enough to clip into a top shirt pockets.
EDC pouch, into left front pants pocket.
Heater into right front pants pocket.
Gerber MP400 into belt pouch, back left.
&
Vic 111mm Equestrian, clips into left front pants pocket.¡Saludos all!

-
@fullbreakfast said:
Here’s mine:
This, plus a credit card, is what’s in the pouch:

I carry this in my jeans pocket all the time. The key and credit card are there so if I dash out of the house in a hurry, and don’t have time or inclination to grab the bag that has my proper wallet and other gear, I have the very basics: I can pay for stuff, I can get back in the house.
What brand is that 1/4" to 4mm adapter? Is half the 4mm bit in the adapter? If it is, that means it is deep enough for double-ended bits, so I could carry that adapter and replace all my regular 4mm bits with double-ended ones and double my capacity.
-
-
The fella from UK, who sold me these, on eBay, didn't say if they're printed scales or not.
They look printed and have endured rigorous use, for 6 months!
They are thin! Plus I had to further grind out the pen slot, for pen in scale to sit flush against my Equestrian's liner.
After setup, I discovered that an old Wenger tweezer fit the scales tweezer-slot much better than a Vic tweezer.

-
Apologies for the terrible shot!

Scales sure look printed.Here's the scales' eBay site

-
@el dust bandit said:
My EDC "stuff" does tidy up quite well:
Skeletool is light enough to clip into a top shirt pockets.
EDC pouch, into left front pants pocket.
Heater into right front pants pocket.
Gerber MP400 into belt pouch, back left.
&
Vic 111mm Equestrian, clips into left front pants pocket.¡Saludos all!
Seems like more than I would want to pocket, but if it’s working for you, carry on!

-
I add Goldfish snacks, sani-wipes and diapers,
when charged with the wee granKids!I'll disclose that I worked in Uncle's Department of Redundancy Dept, for a very long time.
-
-


Thanx ALOX for your query, Farmer X !Cheers !
-
@ReamerPunch said:
What brand is that 1/4" to 4mm adapter? Is half the 4mm bit in the adapter? If it is, that means it is deep enough for double-ended bits, so I could carry that adapter and replace all my regular 4mm bits with double-ended ones and double my capacity.This is going to be a disappointing answer on every level. I don't remember where I got it or who made it, but I'm pretty sure it won't take double-ended bits. But I can't check at the moment because, having swapped it out of my EDC pouch for a different option, I now can't find the damn thing.
-
My carry to a Mozart concert - Requiem performed in a church hewn right into bedrock - is festive and dignified.

-
-
As is the church. You can't see it here but the ceiling is also made of copper strips.

-
@fullbreakfast said:
This is going to be a disappointing answer on every level. I don't remember where I got it or who made it, but I'm pretty sure it won't take double-ended bits. But I can't check at the moment because, having swapped it out of my EDC pouch for a different option, I now can't find the damn thing.Positive: I found it.
Negative: Useless for double-ended bits.
-
-
[UPDATE]
Regarding Plus Scales,
for Victorinox 111mm SAKs:A yay-hoo broke my Vic. 111mm Hunter's blade, while field dressing an antelope.
Reprising my trusty ol' slide-loc Outrider, to backup home duty, sparked an epiphany that spawned an
Outrider–Hunter franken·Knife!
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
Where did you find those scales, and are they 3-D printed?