What did you just get?
-
Why is the light going back?
-
The Mrs ordered these hooks cause she wanted them mounted at the back door and going down the stairs, so I got this idea since I had some scrap 2x’s from the porch project but I think it worked, an absolute twisted board with a plank screwed into the top to give it a little shelf and the hooks somewhat eyeballed, but that thing is screwed into two stud with 3” deck screws, I don’t think that things going anywhere, and each hook is rated for 35lbs! That should be good no?
JR
-
Because it's too cheap to keep.
The tail magnet is barely strong enough to keep the light on a surface.
The pocket clip was very misaligned, and although it has three screws, it still wobbles.
I have to cycle through all modes in order to turn it off. Or wait 30 seconds and then turn it off with a single click.
It felt very cheap in hand, with gaps in the frame.The only thing I liked was the dimensions, but that was not enough to save it.
-
Not a tool this week, but more Retrogaming Stuff: , I know the CEO of Modretro is a bit controversial, but the Gameboy is nice ..
So an Modretro Chromatic in Blue, the Batterie Pack, Tetris (was bundled whit the Chromatic) which is a quite good Tetris Version for an Gameboy, Toki Tori Ultimate, Projekt S-10, Gravitourque DX, and not from Modretro but from Krizz: The Gameboy EverDrive X7, I had an GB EverDrive bevor but it was an old Version, this one got even an Button you can Press while you play an Gameboy Game for stuff like even Safestates ..Fu!!! Its doesn't work ;(
-
@ReamerPunch said:
Because it's too cheap to keep.The only thing I liked was the dimensions, but that was not enough to save it.
Good reasons. I'll avoid that particular flashlight; I'm thinking my next one will be a Lumintop Tool AA.
-
-
WorkPro mini pliers and ratchet!


-
Nice pliers!

JR -
@MadPlumbarian said:
Nice pliers!
JR+1
How do they compare with Knypex? I've tried to find the brand around these parts, but no luck. Maybe I'll look for these instead.

-
@ReamerPunch said:
WorkPro mini pliers and ratchet!I like the little ratchet and bit set in a tin. Shame they couldn't squeeze a short bit extension in there, in the space on the left...
-
@pfrsantos said:
+1How do they compare with Knypex? I've tried to find the brand around these parts, but no luck. Maybe I'll look for these instead.

The WorkPro pliers are solid, fit and finish is fine, nothing to complain about. Nice and smooth. The button works properly. Having a button means that the WorkPro pliers do not slide as easily as the Knipex into a pocket etc.
The WorkPro pliers are about a 1/4" longer than the Knipex. The teeth are not as aggressive, but they do grab. Very slippery compared to the Knipex. Worth the 1/3 of the price. The Knipex is of course better. -
@fullbreakfast said:
I like the little ratchet and bit set in a tin. Shame they couldn't squeeze a short bit extension in there, in the space on the left...That's just a plastic thing, not a tin. But a tin would have been nice.
-
@ReamerPunch said:
That's just a plastic thing, not a tin. But a tin would have been nice.I see that now. Actually in the process of getting some new glasses, evidently I need them!
-

When the postman brought this, I was as excited as a kid on Christmas morning.
-
This was a freebie. It could work as a standalone EDC tool, having all the most important tools and not looking too much like a knife. Let's see if it gets pocket time.

-
When the postman brought this, I was as excited as a kid on Christmas morning.
The reveal:

Been wanting to get a decent electric screwdriver for some time. I'm going to have several pieces of flat pack furniture to build shortly (a job I really enjoy doing!) and this gave me the impetus to get one. Before this I've only had a crappy little gun-shaped one that only had one torque setting, and was too weak to do much. So it was either manual screwdriving, or using my big old corded hammer drill, which is not exactly perfect for the job. We will see how good this is, but Wiha never sold me any crappy tools yet.
The 30-bit box is a very nice inclusion:

Wiha bits are really good of course, and the selection here is well thought out. Instead of 30 different bits including a bunch you will never use, it covers the main bases but gives you multiples of the most-used bits - so 3x PH2 and PZ2, 2x PH1 and PZ1, etc.
-
Very nice bit set.

JonesE
-
I have an Armbar Scout, and it's overall a decent tool. However, it has an obnoxious pocket clip, which means I don't carry it much. That might be a little different if the pocket clip is removable.
@fullbreakfast said:
The reveal:
-
Snow! It’s been snowing for the past going on 3hrs,

JR
-
South of you 3 hours, this was my view out the back door,
[attach id=0 msg=2551746]
Since, it has stopped for now.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
All good reasons for returning.