Spirit owners club
-
Thank you Richard!

-
thanks Richard. I use the worksharp guided field sharpener the ceramic rod is the correct size. It hones the serrations well. -
@Grand_Banana said:
thanks Richard. I use the worksharp guided field sharpener the ceramic rod is the correct size. It hones the serrations well.I love that sharpener, it is really well designed abd super simple to use
-
Somehow, despite having a lot of multitools to pick between, I am surprised at how often I end up carrying the Spirit with me over my arc or flex.
It really is a testament to Victorinox's designers that they managed to make a tool that is compact but also dense in features without compromising ergonomics, strength, utility, or functionality.
With the direction victorinox has taken recently with their swiss army knives, I hope they also implement a lot of customer feedback with their swisstools
-
@Richard Zheng said:
Somehow, despite having a lot of multitools to pick between, I am surprised at how often I end up carrying the Spirit with me over my arc or flex.It really is a testament to Victorinox's designers that they managed to make a tool that is compact but also dense in features without compromising ergonomics, strength, utility, or functionality.
With the direction victorinox has taken recently with their swiss army knives, I hope they also implement a lot of customer feedback with their swisstools
The real testament to Victorinox Dedibners of the SPIRIT, is that the design they released in 2003 or so has stood the test of time with minimal revisions. And they resisted the temptation of releasing a new tool every couple years.
Do it once, do it right!
-
for me it is the best multitool and when I try to carry something else, I realize other MTs don’t have a feature I rely on my Spirit. The only two additional tools that would make it better is a bit driver and both SE and PE blades. -
@Grand_Banana said:
for me it is the best multitool and when I try to carry something else, I realize other MTs don’t have a feature I rely on my Spirit. The only two additional tools that would make it better is a bit driver and both SE and PE blades.I agree with you on the PE and SE, or even a longer combo blade like on the OHT.
That was my reasoning to buy a MXBS model, and maybe that beautiful black finish.
As for a bit driver, the LM bit kit adapter made for the REBAR, ST300 and similar models also fits perfectly on the PHILLIPS Driver on the the Spirit.
It comes with 5 flat bits(10 ends) and 1/4” bits fit as well.
[attach id=0 msg=2549492]

-
@LoopCutter said:
I agree with you on the PE and SE, or even a longer combo blade like on the OHT.That was my reasoning to buy a MXBS model, and maybe that beautiful black finish.
As for a bit driver, the LM bit kit adapter made for the REBAR, ST300 and similar models also fits perfectly on the PHILLIPS Driver on the the Spirit.
It comes with 5 flat bits(10 ends) and 1/4” bits fit as well.
[attach id=0 msg=2549492]
Yea that is what I carry as well when I need a bit driver, I also carry around a leatherman ratcheting bit driver in addition to the bit adapter for some more serious work
-
Actually I think I am going to ditch my victorinox compact for the roxon flex mini companion.
It looks like a much more attractive package:
-
One-handed opening, locking, blade
-
Diamond file (something I miss from leathermans)
-
4mm locking bit driver (very compact solution)
-
Giant awl (better for drilling into polycarbonate sheets IMO)
-
Ruler and crosscut file (for measuring nut size and bolt lengths)
-
Still has tweezers and toothpick
-
-
Report back or create a new thread detailing your experience when you get a chance to become familiar with the Dixon! Sounds promising.
-
Or, as an alternative, instead of the adapter from the LM bit set made for the REBAR, ST300, use a Victorinox SwissTool bit set and bit wrench.
A little pricey, but you have a full set of 10 bits and a wrench.
The idea of having a full size screwdriver in the Multitool without bits, reduces the chances of losing any bits.
If carrying individual bits and attaching them to the tool is an idea (which is often inconvenient in a tight space), why not carry a separate bit set with a wrench?
In this case, you can use pliers to hold something and use the bit set with a wrench.

-
@Vadim said:
Or, as an alternative, instead of the adapter from the LM bit set made for the REBAR, ST300, use a Victorinox SwissTool bit set and bit wrench.A little pricey, but you have a full set of 10 bits and a wrench.
The idea of having a full size screwdriver in the Multitool without bits, reduces the chances of losing any bits.
If carrying individual bits and attaching them to the tool is an idea (which is often inconvenient in a tight space), why not carry a separate bit set with a wrench?
In this case, you can use pliers to hold something and use the bit set with a wrench.
It is a pretty nice combo IMO, I always prefer having a dedicated screwdriver in my multitool and have a bit driver elsewhere as I find the ergonomics of using a multitool as a screwdriver to be suboptimal.
An even cheaper potential solution is to 3D print a bit driver for leatherman bits, and pair that with the galvanox slim bits.
A 3D printed bit driver might not be able to withstand the same torque, but it will easily handle most tasks that you would need a screwdriver for
-
But, do not forget the cost of the 3D printer and supplies and time to program.
Unless you have access to one with no additional cost.
Just saying.
From experience, it was just easier to walk to the truck, grab the correct dedicated tool from my tool box and walk back and do the tasks.
I recall one instant, two young employees were trying to drive a pin from a chain to remove a link or two shorten a chain on a gate operator. Already wasted three hours before trying. I sent one to the hardware store a mile away. Instructed him to ask for a chain break tool. Buy it and return. I then showed how to use it and how to reconnect. Total time after I arrived was 30 minutes. Would have been less if I just pulled the chain break from tool box, but then they would not have had a chance to learn something.
-
I did rethink my SAK Carry Habbits a bit and came to the conclusion that Swisstool + Bitset + Synergy X + Swisscard is too much for every day, also the Swisstool is 300 grams whit Bits and Ratchet,
So at first I did order an new Belt Pouch because I can’t find the Pouch anywhere that came with the Spirit, put all the stuff back in, and did attach an Carabiner (this Clip thing, not the Gun) , this way I can attach the Pouch to my Belt Loop if I really need it, otherwise it’s stay in my bagpack, ..
-
That's an excellent idea!
-
Just saw the Spirit X on sale on Amazon Canada for $152, great deal IMO
-
Because i did not use the Powerbank in my Retrohandheld Pocket the last Year, also not the Rollon USBC to USBC Cable and i have an Boox E-Book Tablet Thingy in the other Pocket i did decice yesterday to shovel the Bitset again in my EDC Pouch and Clip the Swisstool Spirit also again on my Pocket.. , i cant be whitouth 3 Victorinox Things in EDC ^^ The Beltpouch was a good idea, but its just too inpractical to hang it on the Beltloop.. and sometimes you need it and then you dont have it..
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
