What should my very first multitool be?
-
I’ll amend my recommendation for the ARC. If you’re not going to really use the tool, I’ll agree with the folks above me about not buying one of Leatherman’s more expensive tools; however, if you plan on using it almost daily like I do, then the premium features of the ARC are more than worth the price. Magnacut blades are far more than just a gimmick. They hold their edge much longer than 420HC blades, and much MUCH longer than the soft steel Victorinox uses. I use the crap out of my blade, so it’s nice to not have to sharpen it so often. Also, one hand opening is extremely useful if you use your tool a lot. If you don’t, then just buy something pretty and/or less expensive.
A couple folks recommended the Gerber Center Drive. If the screwdriver is 100% the most important tool for you, then I’ll agree with them - either the Center Drive or the Dual Force. Otherwise, there are better options. Personally, I don’t use either very much because they’re horrible for pocket carry - something very important to me, but not others.
Finally, if you’re on a budget and are not sure a premium tool is right for you, there are a lot of knockoffs that are pretty decent. Grant recommended a Bibury, so that might be a good option too, especially if you’re not sure how or how often you’ll use your tool. If you wait for a sale on Amazon, you can get one of those for $40 or less. They even have one hand opening blades! At six times the price, is a Leatherman ARC 6 times better than a Bibury? That really depends on you - your needs and resources. During my lean years, I would never buy something like an ARC over a cheaper but functional alternative. Still, cheap tools have a place in my life. They’re perfect for punishing jobs that could likely damage your tool. I use mine to cut rat poison on concrete and to submerge in muddy water when working on my irrigation. They’re also perfect for when your friends or neighbors ask to borrow a multitool - I can hand them something that I don’t care if it gets lost or damaged

-
@Rich_SD said:
I’ll amend my recommendation for the ARC. If you’re not going to really use the tool, I’ll agree with the folks above me about not buying one of Leatherman’s more expensive tools; however, if you plan on using it almost daily like I do, then the premium features of the ARC are more than worth the price. MagnaCut blades are far more than just a gimmick. They hold their edge much longer than 420HC blades, and much MUCH longer than the soft steel Victorinox uses. I use the crap out of my blade, so it’s nice to not have to sharpen it so often. Also, one hand opening is extremely useful if you use your tool a lot. If you don’t, then just buy something pretty and/or less expensive.I carry the Glock FM-78 fixed blade on my vest, so I'm not concerned about the multitool blade.
The 420HC on the SURGE seems to be enough, in my opinion.Am I wrong?
@Rich_SD said:
A couple folks recommended the Gerber Center Drive. If the screwdriver is 100% the most important tool for you, then I’ll agree with them - either the Center Drive or the Dual Force. Otherwise, there are better options. Personally, I don’t use either very much because they’re horrible for pocket carry - something very important to me, but not others.The pliers, wire cutters, blade, saw/file, and the awl w/ needlehole are the things I actually need.
The ARC doesn't have a needlehole on the awl, so leatherwork won't be possible with it.How moddable are the Leatherman multitools?
Can I just put the needlehole there myself? -
@iamBETTO said:
I carry the Glock FM-78 fixed blade on my vest, so I'm not concerned about the multitool blade.
The 420HC on the SURGE seems to be enough, in my opinion.Am I wrong?
No, if that’s what’s right for you and your needs, it’s the right answer.

@iamBETTO said:
The pliers, wire cutters, blade, saw/file, and the awl w/ needlehole are the things I actually need.
The ARC doesn't have a needlehole on the awl, so leatherwork won't be possible with it.How moddable are the Leatherman multitools?
Can I just put the needlehole there myself?If a needle hole in the awl is important to you, I would consider the Wave Alpha instead of modifying the ARC - but that’s just my preference for Magnacut talking which you said you don’t need. Still, the Wave Alpha’s scissors are excellent. ;) :D All of that said, the Surge seems like the best option for you.
-
If that is your concern, then just maybe the simpler solution would be the SIGNAL! 😉
[attach id=0 msg=2550025]
[attach id=1 msg=2550025]
It come in several different colors, plus includes a diamond file (removable), fire starter, and end of handle is good for pounding in tent stakes and removing with carabiner.


-
@iamBETTO said:
The pliers, wire cutters, blade, saw/file, and the awl w/ needlehole are the things I actually need.
The ARC doesn't have a needlehole on the awl, so leatherwork won't be possible with it.How moddable are the Leatherman multitools?
Can I just put the needlehole there myself?rebar/swtool spirit
They are very easy to modify, especially if they are 20 years old :)
It's simple: you use electrical erosion to destroy a metal surface, make a hole with a drill, and remove sharp edges with a reamer. Or you cut a groove with a grinder and close it with welding, then polish it and you're done. There are many options, it all depends on the strength of your desire :)
-
Lots of great input here.
I am going to suggest the ARC because it seems as though you want it and it is a great tool especially if you can find it for less than retail.
It seems that no matter what tool you get, you might always wonder if you should get the ARC, just my opinion. -
But the Leatherman Surge awl with a needle hole doesn't come with thread, and if you carry thread why not carry proper needle for that ?

-
I am a long-time Leatherman-tool user. I have worked in Aerospace manufacturing for over 20 years and have always had a Leatherman tool on my belt. My first was the original Supertool - used daily for a decade plus. Then the Surge with a full bit-kit, spare metal saw and extender. I loved that setup in a nylon belt pouch with a right-angle flashlight and a pry-tool. Then I downsized a bit to the Leatherman Charge, as the smaller needle-nose pliers got into tighter places more readily. I passed on the Free P2 and P4 models since I needed to have the bit kit for non standard fasteners, and those models did not have a bit driver. When the Leatherman ARC came out, (which does have a bit-driver) I saved my coins and bought it ASAP. I love the one-handed operation which makes a huge difference as I use the ARC dozens of times per day, often in high-pressure production situations. The ARC was worth it to me, and has paid for itself many times over. The ARC is not a light-use tool, it handles what I put it through daily and still looks great. The Surge will also not disappoint, but is larger. Edited for spelling, etc.
-
Regarding the clones of the Leatherman Wave and Surge platforms by Bibury and others; there is a reason that these models have been cloned -- they pack an almost unbelievable amount of utility and convenience into an easy-to-carry package. In a sheath with all the extras, it is like having a one-hand-operable toolbox on your belt. I have never tried any of the clones -- they may be just fine, but Leatherman has always treated me right with warranty repairs, etc, so I prefer to stick with the company that invented the modern multitool.
-
@Vadim said:
But the Leatherman Surge awl with a needle hole doesn't come with thread, and if you carry thread why not carry proper needle for that ?
I will have a cord (+thread) lanyard on the SURGE for emergency rope/leather-work.
@Sven34 said:
I am a long-time Leatherman-tool user. I have worked in Aerospace manufacturing for over 20 years and have always had a Leatherman tool on my belt. My first was the original Supertool - used daily for a decade plus. Then the Surge with a full bit-kit, spare metal saw and extender. I loved that setup in a nylon belt pouch with a right-angle flashlight and a pry-tool. Then I downsized a bit to the Leatherman Charge, as the smaller needle-nose pliers got into tighter places more readily. I passed on the Free P2 and P4 models since I needed to have the bit kit for non standard fasteners, and those models did not have a bit driver. When the Leatherman ARC came out, (which does have a bit-driver) I saved my coins and bought it ASAP. I love the one-handed operation which makes a huge difference as I use the ARC dozens of times per day, often in high-pressure production situations. The ARC was worth it to me, and has paid for itself many times over. The ARC is not a light-use tool, it handles what I put it through daily and still looks great. The Surge will also not disappoint, but is larger. Edited for spelling, etc.Here is what others said, and my response to them:
-
“MagnaCut blade is worth it”
-
I have an FM-78 fixed blade. The ARC’s blade is redundant luxury.
-
“Lighter = better”
-
3 oz savings is nothing when I carry a rifle + handgun + plates. Leverage is a priority over saving 3 oz.
-
“ARC is the new flagship”
-
It’s a YouTube darling, not a field workhorse. Surge still seems better for medium-heavy duty work.
After doing thorough research the ARC seems like an expensive paperweight compared to multitools like the SURGE.
Don't get me wrong, I still like it because it looks so f**king good, but as of now I changed my mind and remain unconvinced.The Leatherman SIGNAL started winking at me, though...
I'd like other people's opinions on it. -
-
- “MagnaCut blade is worth it”
- I have an FM-78 fixed blade. The ARC’s blade is redundant luxury.
Do you have a special FM-78? I ask because I just read up on that knife, and its high carbon steel is significantly softer than Magnacut. Magnacut may still be a luxury for you, but it’s certainly not redundant to the Glock’s blade.
-
@iamBETTO said:
Why not? It's a good idea for emergency leatherwork on the field when I think about it.But you already have a separate emergency kit: cord (+thread), cord/rope, why not add the right needle for working with leather?
Have you ever used a SURGE awl for working with leather?
By the way, an awl with a hole is more prone to breaking if used as a reamer.
-
@Rich_SD said:
Do you have a special FM-78? I ask because I just read up on that knife, and its high carbon steel is significantly softer than Magnacut. Magnacut may still be a luxury for you, but it’s certainly not redundant to the Glock’s blade.I have a small EDC pouch I haven't finished optimizing yet.
I believe a micro sharpener will solve that dilemma for me.What do you think?
@Vadim said:
But you already have a separate emergency kit: cord (+thread), cord/rope, why not add the right needle for working with leather?Have you ever used a SURGE awl for working with leather?
No, I've never owned a multitool before.
To answer your question, I live in a village so I'm trying to optimize it for both when I'm on duty and when I'm at home bushcrafting or what not.Again, all of this is me doing my research. My thoughts and opinions need to be challenged so I can ideally optimize this whole thing, so feel free to counter anything I say.
-
@iamBETTO said:
I have a small EDC pouch I haven't finished optimizing yet.
I believe a micro sharpener will solve that dilemma for me.What do you think?
If that’s the right solution for you, sure! I’m just pointing out that the ARC’s Magnacut blade will retain its edge far longer than your dedicated blade. You’ll want to carry a sharpener either way you go. Personally, I would like a blade that stays razor sharp without the need for constant sharpening. The 420HC on the Surge might even retain its edge better than the Glock, but I’m not sure on that. Even if it doesn’t, you could reserve the Surge’s blade for only when you need a super sharp blade and use your fixed blade as your workhorse. Whichever way you go, know that the ARC is not an “expensive paperweight” compared to other multitools. I think people make that claim because they’re upset over the price (ie sour grapes).
-
My SURGE’s plain edge blade as a recurve and can be tricky to sharpen by hand if not paying attention.
Yet, the Serrated edge is cutting machine for awl materials that are fiborous.
-
@iamBETTO said:
The Leatherman SIGNAL started winking at me, though...
I'd like other people's opinions on it.The Signal is a decent tool. My big gripe with it is that the hammer end makes using the inside-opening tools kinda tricky. I'm also not overly fond of the combo edge blade. But the Signal could be a good choice, especially if your primary tools will be the saw, blade, and pliers. And I'm pretty sure they're available in bright colors, which should make them harder to lose when you're out in the field.
-
I vote for the ARC.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
