What should my very first multitool be?
-
I'm a bit late getting back to you, sorry.
I don't know what the long term (6 months +) situation is for the Bibury as I have only had it about a month.
I have had the Signal much longer and as far as I am concerned, it is an absolute failure of a design, which is even more offensive given it's high price.
Due to the carabiner end the screwdriver, awl and can opener have to be used when the rest of the tool is flopping around. You can't fold out the screwdriver, awl or can opener and then fold the handles together to actually use it, because the carabiner handle is in the way of the handles coming together. For some people this isn't an issue, but I also believe that many members here (and in the greater internet universe) wouldn't accept a design flaw like that from any other company.
The Signal has a lot of fancy stuff on it like the removable diamond file and the whistle that it draws your attention away from the fact that they forgot the basics of multitool design.
Honestly, I'd stick with the Surge or the Wave. Leatherman may have a large and varied lineup, but those are the only two with a one handed opening blade that are worth spending money on. In the current line up, if a one handed blade isn't a necessity you do have a few more good options, including the afore mentioned SuperTool 300 and Rebar and the Bond.
The Bond is basically the current version of the original Leatherman, The PST and is pretty good, although the only one I have is so tight it's almost impossible to get tools out and use it, but I am sure that isn't a problem across the board. I have quite a few Leatherman models and it's the only one I have that is like that.
There is also the Curl, which IMHO falls into the same category as the Wave as it's basically half of a Wave.
Def
-
@Grant Lamontagne said:
Due to the carabiner end the screwdriver, awl and can opener have to be used when the rest of the tool is flopping around. You can't fold out the screwdriver, awl or can opener and then fold the handles together to actually use it, because the carabiner handle is in the way of the handles coming together.That's exactly what I meant when I said that using a Signal's inside tools is "tricky."
-
@Grant Lamontagne said:
I'm a bit late getting back to you, sorry.I don't know what the long term (6 months +) situation is for the Bibury as I have only had it about a month.
I have had the Signal much longer and as far as I am concerned, it is an absolute failure of a design, which is even more offensive given it's high price.
Due to the carabiner end the screwdriver, awl and can opener have to be used when the rest of the tool is flopping around. You can't fold out the screwdriver, awl or can opener and then fold the handles together to actually use it, because the carabiner handle is in the way of the handles coming together. For some people this isn't an issue, but I also believe that many members here (and in the greater internet universe) wouldn't accept a design flaw like that from any other company.
The Signal has a lot of fancy stuff on it like the removable diamond file and the whistle that it draws your attention away from the fact that they forgot the basics of multitool design.
Honestly, I'd stick with the Surge or the Wave. Leatherman may have a large and varied lineup, but those are the only two with a one handed opening blade that are worth spending money on. In the current line up, if a one handed blade isn't a necessity you do have a few more good options, including the afore mentioned SuperTool 300 and Rebar and the Bond.
The Bond is basically the current version of the original Leatherman, The PST and is pretty good, although the only one I have is so tight it's almost impossible to get tools out and use it, but I am sure that isn't a problem across the board. I have quite a few Leatherman models and it's the only one I have that is like that.
There is also the Curl, which IMHO falls into the same category as the Wave as it's basically half of a Wave.
Def
No matter how hard I try, the SURGE always ends up leading.
I'm thinking the bit driver could be good to have the appropriate bits for a rifle/handgun/knife or whatever maintenance. The SuperTool 300 looks good, but the tools are inside and the lack of bit driver is a bummer.
-
I don't think you can go wrong with the Surge. It is a good tool and out of all the tools Leatherman has produced over the years, I would say it is one of the absolute best- and that's saying something as they have made a lot of good models over the years.
The only real drawback. as I said was the flat bits that are a pain in the arse to source if you need something other than the bits that it comes with. You can also pay them even more money to get the bit adaptor to make up for the fact that their tools can't do what every other tool on the market already does.
I don't honestly find myself needing anything besides the bits it comes with, so it's not a really big deal.
Def
-
@Farmer X said:
That's exactly what I meant when I said that using a Signal's inside tools is "tricky."I don’t use a Signal much, but I use a Skeletool frequently and it has the same “problem” with its screwdriver. Sure, it’s not the idea configuration for a screwdriver, but I never had a problem using it. Considering how much I love the design, having a L-shaped screwdriver handle is an acceptable trade off for what is required to make the rest of the tool work.

-
@iamBETTO said:
No matter how hard I try, the SURGE always ends up leading.I'm thinking the bit driver could be good to have the appropriate bits for a rifle/handgun/knife or whatever maintenance. The SuperTool 300 looks good, but the tools are inside and the lack of bit driver is a bummer.
I’m not going to try to talk you out of the Surge.
It’s a great tool, and seems to be the one that’s caught your eye.
There is a fairly cheap accessory that fits over the Phillips if the Supertool, Rebar, and Bond to let you use any 1/4” bit.
It gives you the best of both - cheap, easily replaced bits for when you need them, but strong fixed drivers for when you just need the basics.
Obviously you can get the same effect with the bit extension or ratchet paired with a Surge.
-
You could see ST300M model since it comes with bitdriver extension (1/4") bitkit and sheat
-

My name is Betto, and I'm now a proud owner of the Leatherman SURGE. 🤘🏻
-
Well you cant go with Surge, hope your gonna like it
-
SURGE!!!!!
-
-
Congratulations! Great tool! You’ll also always wonder if you should have gotten the ARC instead 😉
-
@iamBETTO said:
I'm now a proud owner of the Leatherman SURGE. 🤘🏻I was going to say that since you kept going back to the Surge, that's the one you should buy. Congratulations, and enjoy putting it through its paces!

@Grant Lamontagne said:
I look forward to hearing your thoughts on it now that you have it!Me, too!
-
Gilotsavt shesanishnavi nivtis shedzenas!
Congratulations on purchasing a great item! -
Thanks a lot to everyone.
The SURGE looks like the best choice for a first multitool if you're going to deal with medium-heavy work.
I think I will skip the Raptor for now and stick to regular shears.
I fear I'm starting to fall into the rabbit hole. The mini SAK tools are looking hella good right now.
Are there any good mini ones you guys recommend? I'm currently carrying a small keychain potato I got from AliExpress.
-
That's probably a topic that deserves its own thread, so I'll keep it brief. Going forth, I won't purchase a 58mm SAK that doesn't have the combo tool.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

