Favorite SAK/multitool combos
-
Mosr definitely! 8) Thanks

-
It was just a quick mod that I didn't really document
:DJust a Sidekick/Wingman clip and the Irwin OHO blade that came from an Irwin Locking pliers MT
I think that the pivot I used also came from a Wingman/SideKick tool as well 
All I did was take the PST pivot out, bent the little tab on the clip in (you could also drill a hole so the tab could go into) and put the clip against the tool then the small lanyard ring over it and then the pivot
The reason I had to swap pivots was because I needed a lo ger one to accommodate the OHO blade. I am sure the regular pivot would work if you were only adding the clip 
-
Been giving this a lot of thought lately as I've been wanting to add a Leatherman to my pockets for EDC to compliment my SAK (usually a Climber or Pioneer X).
My Wave (2nd Gen) and Surge were too heavy and bulky for my pockets, and the Skeletool while lightweight doesn't ride right in the pocket with the clip design.
I've finally decided on the Compact and the Bond as the best combo for me (for now) considering the weight distribution and the minimal overlap in utility.
[attach id=0 msg=2546043]

-
Great pair of tools!

Welcome to the forum MHrlz52!
JonesE
-
I have minichamp alox. Can anyone recommend me a Leatherman to combo with it? I have Signal, Alpha and Arc in my sight but other recommendation is welcome!
-
@Yama Yago said:
I have minichamp alox. Can anyone recommend me a Leatherman to combo with it? I have Signal, Alpha and Arc in my sight but other recommendation is welcome!I would say the short answer is, “It depends.”
Do you work in construction, maintenance, or the trades? You’ll probably want a heavy duty tool that can stand up to frequent significant use.
Do you work in an office or classroom? Something smaller and lighter might be in order.
Do you have a lot of property to maintain? Enjoy hiking and or camping in your spare time?
How do you plan to carry the tool? Pocket, belt sheath, bag?
What functions would add value for you that aren’t covered by the Minichamp?
-
Yes, it depends. If you don't find yourself needing pliers on a fairly regular basis, then maybe you don't need one at all. It takes some getting used to when you carry a bulky tool like the heavy-duty Leatherman models. The novelty and perceived utility of multis sometimes dims when you actually carry one of these clunkers.
If I needed (wanted) a Leatherman and didn't have one (and I lived near a Costco) I would go and look at the Sidekick with the sheath combo they are practically giving away now. Blue ones and yellowish ones. The tools are slick and function smoothly. Not terribly heavy or long. Whatever you decide, I think you should probably try to handle a few different multis before you sign up for one. See if this is really what you want.
Best wishes,
Gary -
@nate j said:
I would say the short answer is, “It depends.”Do you work in construction, maintenance, or the trades? You’ll probably want a heavy duty tool that can stand up to frequent significant use.
Do you work in an office or classroom? Something smaller and lighter might be in order.
Do you have a lot of property to maintain? Enjoy hiking and or camping in your spare time?
How do you plan to carry the tool? Pocket, belt sheath, bag?
What functions would add value for you that aren’t covered by the Minichamp?
I usually stay in urban area (usually my home/uni) I usually use my minichamp for package opening, cut some hanging cloths or opening some bottle. I want the leatherman that cover the urban fixing thing like more screwdriver or thing that minichamp isn't capable off like opening can . for the plan to carry I plan to carry in the bag.
-
@Yama Yago said:
I usually stay in urban area (usually my home/uni) I usually use my minichamp for package opening, cut some hanging cloths or opening some bottle. I want the leatherman that cover the urban fixing thing like more screwdriver or thing that minichamp isn't capable off like opening can . for the plan to carry I plan to carry in the bag.It might be worth considering whether you really need/want pliers and or wire cutters. If not, pliers-based MTs tend to be heavy and expensive relative to knife-based MTs, and the ergonomics of all the other functions are subject to the pliers-based form factor.
If all you really want is a can opener and a few more screwdrivers, something like a Vic Tinker might fill the bill at a lower weight and cost than a Leatherman.
If you do want the pliers or wire cutters, or you’re just set on a Leatherman, IMO the Rebar occupies something of a sweet spot in the current Leatherman lineup. It’s a full-size tool with a large number of functions, but weighs noticeably less and costs only a fraction of what flagship models like the Arc and Alpha do.
-
A Vic Explorer is the ultimate urban SAK in my opinion, and I’m pretty sure just about every YouTube personality that reviews SAKs has said that at some point.
If you think you need pliers then I’d go for a light and minimal pliers based multitool like a Leatherman Bond or pick up a used PST or Kick.
But given that you’re at a university, I’d stray away from a PBMT. Many campuses in many countries are very strict about knives and yet a 91mm SAK may get a pass because it’s legal in a lot of places. I’m in the US and a professor. I pocket carry a Vic swisstool spirit and a Rally every day. I usually have the spirit in a sheath in the lab. The only reason I can get away with it and no one cares, although we are technically 0 tolerance for knives, is because I need it for work. I literally use it every day in the lab.
-
@Grand_Banana said:
A Vic Explorer is the ultimate urban SAK in my opinion, and I’m pretty sure just about every YouTube personality that reviews SAKs has said that at some point.If you think you need pliers then I’d go for a light and minimal pliers based multitool like a Leatherman Bond or pick up a used PST or Kick.
But given that you’re at a university, I’d stray away from a PBMT. Many campuses in many countries are very strict about knives and yet a 91mm SAK may get a pass because it’s legal in a lot of places. I’m in the US and a professor. I pocket carry a Vic swisstool spirit and a Rally every day. I usually have the spirit in a sheath in the lab. The only reason I can get away with it and no one cares, although we are technically 0 tolerance for knives, is because I need it for work. I literally use it every day in the lab.
I agree the Explorer is a great SAK, though at four layers it is the upper bound of what I want to pocket carry.
Part of what I meant by the Rebar being in the sweet spot is that it is less than an ounce heavier than the Bond, but has some additional tools/features, including saw, serrated blade (in addition to PE blade), electrical crimper, and replaceable wire cutters.
With regard to university policies, the best way to know is to check yours. It has been a couple of decades since I was in college, but I checked the current policies of my alma mater just for fun. While guns, explosives, and other dangerous and deadly weapons are not allowed unless explicitly authorized, there is no specific mention of knives.
-
@nate j said:
I agree the Explorer is a great SAK, though at four layers it is the upper bound of what I want to pocket carry.Part of what I meant by the Rebar being in the sweet spot is that it is less than an ounce heavier than the Bond, but has some additional tools/features, including saw, serrated blade (in addition to PE blade), electrical crimper, and replaceable wire cutters.
With regard to university policies, the best way to know is to check yours. It has been a couple of decades since I was in college, but I checked the current policies of my alma mater just for fun. While guns, explosives, and other dangerous and deadly weapons are not allowed unless explicitly authorized, there is no specific mention of knives.
My Uni policies is "Just don't swinging a blade in public and we good" (I live in SEA so smt like knife crime is not so common)
-
Haven't used my rebar in a while. It's slightly modded with a scissor and as of this morning a new pocketclip, paired with a victorinox rambler, to be fair this is my second favorite combo. I usually carry a SAK paired with my style PS but sometimes you have to spice things up
[attach id=0 msg=2550888]

-
@Grand_Banana said:
A Vic Explorer is the ultimate urban SAK in my opinion, and I’m pretty sure just about every YouTube personality that reviews SAKs has said that at some point.If you think you need pliers then I’d go for a light and minimal pliers based multitool like a Leatherman Bond or pick up a used PST or Kick.
But given that you’re at a university, I’d stray away from a PBMT. Many campuses in many countries are very strict about knives and yet a 91mm SAK may get a pass because it’s legal in a lot of places. I’m in the US and a professor. I pocket carry a Vic swisstool spirit and a Rally every day. I usually have the spirit in a sheath in the lab. The only reason I can get away with it and no one cares, although we are technically 0 tolerance for knives, is because I need it for work. I literally use it every day in the lab.
Would you rather recommend super tinker over explorer?
-
Ordinary 2-layer models like Spartan and Tinker are great. They are rather ordinary, so people tend to overlook them. Cost is low. Quality and utility are very high. Best wishes, G

-
@Yama Yago said:
Would you rather recommend super tinker over explorer?Personally, I would take an Explorer over a Super Tinker. You get the mag glass, corkscrew, and inline Phillips (which is more versatile and easier to use than the back-mounted Phillips). The only negative is going from three layers up to four.
Now, there could be an argument for Deluxe Tinker over Explorer, depending on whether you consider the loss of the corkscrew, mag glass, and inline Phillips worth the trade for the small pliers (which are really excellent by the way, just not large enough for some applications).
-
@nate j said:
Personally, I would take an Explorer over a Super Tinker. You get the mag glass, corkscrew, and inline Phillips (which is more versatile and easier to use than the back-mounted Phillips). The only negative is going from three layers up to four.Now, there could be an argument for Deluxe Tinker over Explorer, depending on whether you consider the loss of the corkscrew, mag glass, and inline Phillips worth the trade for the small pliers (which are really excellent by the way, just not large enough for some applications).
It is great, and I carried one daily for a while, but I seem to have less tolerance for fat SAKs in pocket than I used to. I don't think I would have it as a pocket carry now.
-
@Yama Yago said:
Would you rather recommend super tinker over explorer?Like Nate I would take the Explorer. I prefer the Explorer for the inline Phillips and the mag lens, but that’s also because I carry a pliers based multitool for the pliers. I agree with Nate that 4 layers is really my limit for comfortable pocket carry and you could make the argument for either the super tinker or explorer. I don’t really notice a difference between 3 and 4 layers SAKs but both are more noticeable in the pocket than say a regular 2 layers Tinker.
To be fair, I really don’t care for the back spring Tinker Phillips as the T handle style makes it unusable in most applications I need a driver. But I have both only after deciding to see what the Tinker was all about.
I think you’d be happy with the Explorer if you can find a good deal. They’re $65 USD on the Vic website, but I got mine for less than $40 a couple years ago. Still more than a Tinker.
Regarding the knife laws and Uni rules, seems like a reasonable approach. SAKs seem to be fairly universally accepted in places without very strict 0 tolerance laws as long as you’re not swinging it around. Hell, TSA here missed my wife’s Explorer and alox Minichamp on 2 flights so it’s really up to whomever is watching.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
