December 2025 Tool Box Challenge
-
Gary graciously invited me,i have to be polite and accept.

this challenge is intriguing,single use tools? now there's a novel idea
I actually EDC a single use tool or 2.
Is a mini ratchet good to go? It will be fun putting together a single-use EDC tool setup -
Good to hear from you, Harm. Mini-ratchets are completely fine. I know that because our friend Reamer Punch sanctioned them in the first running of this challenge. Ratchetologists the world round revere RP and his treatise on the bounty of that particular tool.
One of our friends that I mentioned the Toolbox challenge to said he didn't know there was such a thing. After all this is a multi-tool sort of club. It seemed counter to the tenets that there should be a NO multi-tool challenge.
It is time for members to break that cycle of addiction. Get that monkey with the face of Tim L off your back. Pack away the little red knives for a month and get a REAL knife out of the pit where you have abandoned it.
On the other hand, it could make you appreciate the cold, stiff, folding metal clunkers even more at the end of the ordeal? Maybe. No falling off the wagon on this one. If you decide to carry just one little multi-tool for a backup? Just in case. Honor demands you drop out of the challenge. But IMR, what if my wife is locked in a washroom stall and I might need a 2 dimensional phillips screwdriver to free her? Like the one on my Thingman or Scourge? Tell her to get down on the floor and crawl under the stall. Or get her to move back as you kick in the door. Then you can apologize to her for not carrying a screwdriver (single use) like you were supposed to in the first place.
There is still plenty of time to join. I have been carrying a Buck trapper for a while now. Getting into the swing of things. Dug through my rusting box of extra screwdrivers and found a nice pocket sized one. Best wishes. G

-
- AzteCypher
- IMR4198
- ReamerPunch
- Farmer X
- fullbreakfast
- nate j
- LoopCutter
- Humayd
-
Just got back from W-Mart. I saw the orange handled internet sensation of last year. Marked down to $8.50. People were buying the shelves out last year and scalping them on wee-bay. Some sort of copy. Bug out or bug spray or something, I forget.
Orange knife would be legal for Toolbox challenge, of course. I did see some illegal knives, like the new display of Classics. Several colors. Best wishes. G
[attach id=0 msg=2550964]
-
Nice looking green one there.
-
I also saw what I found out was a Classic copy by Swiss+Tech. Chinese. $15. Flat black and ugly. I would pick one up if I found it lying in a parking lot. Probably where someone threw it. I finally learned it is the Listig (clever) model. ST things get a German name. Some of their stuff is probably okay. I do have one of their tiny keychain multis which was good enough to get me No Blade badge here at MTo. Also, I used it for an Off Brand badge. Well worth the $2 I paid for it years ago.
Illegal for Toolbox challenge as well. I will have to give up my fingernail maintenance Bijou when the challenge starts. We all must make a sacrifice. I will put it in a drawer, so I won't yawn some morning, look at my nails, and reach for my white Bijou without thinking.

-
Speaking of drawers!
A couple months back a box was be identified for the recycle bin, and I changed my mind. Went into the kitchen, pulled out the “Junk” drawer, extracted a few items I use frequently; a Buck fix blade, a couple pairs of full size scissors, address book, a scotch tape dispenser, a couple bread wire ties and matching flat bread clips! Then dumped the drawers remains content in that box, with intentions of pulling out a few good rubber bands, paperclips, black sharpies and pencils.
Well the box set where I left it😳
Until this morning, needed a highlighter, started digging, orange highlighter found, and a few other interesting items. Including a screwdriver I had not seen in thirty years! Suspect my wife borrowed to open a paint can at some point and claimed it, the 3 other objects in the picture..,
[attach id=0 msg=2551073][attach id=1 msg=2551073]
The screw driver a flat blade may find its way into my December kit😎
PS: the drawer, it was returned to the kitchen cabinet, the items removed earlier added, the front space of the drawer is now holding area for SUV’s keys, truck keys, my wallet at night and money clip, plus a BOND.


-
I haven't seen that kind of pencil sharpener in years. Folding scissors could be a great pocket item for the challenge. Best wishes. G

-
Here's a contender for the one piece scissors category: Fiskars folding scissors. Will not open in your pocket, very high quality.

-
Those look quite a bit bigger than the tiny folding scissors my Mom kept with her sewing goods. I might have to hunt down a pair!

-
One of the best liked tools on a SAK seems to be the scissors. There are lots of good single purpose scissors out there. I have two or three small ones myself. Might have to dig them out and see what is available.
I wanted to walk down the driveway today and see if anything needed clearing out. I mentioned on another thread that I had to clear ANOTHER dead tree out of the driveway yesterday morning. Not a big one this time. Just too cold and windy for me to get out today. I try not to walk down that driveway when it is windy. Downed trees from the wind is one thing. Being pinned under one is another.
The only other challenge for December with any interest seems to be the oversize SAK challenge. That one was out for me since I don't have any qualifying equipment. I do have a SwissChamp, but never really had any urge to possess one of the really big SAKs.
Deer season opens soon. I just can't justify converting a young deer into venison. Too much meat and I don't like to waste things. I never was interested in trophies either. Seems like I use less and less meat every year.
I have been using either traditional folders or something like an Opinel for carry knives this month. Not exclusively. I carried a Leatherman a couple of times and my old stand-by 108mm. It was a SRM flipper clipper today. The company says it stands for Stay Ready for More or something. Somebody figured that was preferable to Sanrenmu. Best wishes. Gary

-
It was pretty cold here today as well. We didn't get above freezing.
-
@IMR4198 said:
The only other challenge for December with any interest seems to be the oversize SAK challenge. That one was out for me since I don't have any qualifying equipment. I do have a SwissChamp, but never really had any urge to possess one of the really big SAKs.It's kinda funny that the choice of challenges for December is either to carry 100 functions or just one. It's a month of extremes.
I have committed to the tool box challenge, and I still don't know how I'm going to replace the opener layer on my SAK with single-use tools. Getting by without that opener layer will be the most interesting / annoying part of the challenge, for me. But it wasn't really a choice between the two challenges, as like you I don't have any SAKs that are big enough for the other one.
-
As Tubah said to his son Oogla, when asked about dating advice, just go out there and get a woman like I did. Take a club and bonk one on the head and drag her to your cave. Don't bonk too hard and if she smiles at you first just give her a tiny little bop and she will pretend to be hurt as you drag her away.
Let's see what is on the opener layer of a SAK. Medium sized screwdriver, small screwdriver, can opener, not-very-good wire stripper, bottle opener. The replacement for the screwdriver part doesn't even need a comment. Can opener? Do you really use one? I'm sure you have a nice one at home. Wire stripper? Nobody serious about wire stripping on a job would use the SAK for that. That leaves bottle opener. Lots of bottles with caps here actually screw off. Anything that doesn't is easily opened with a plier. In a pinch the screwdriver will work as well. The world is full of dedicated bottle openers. String one on a piece of twine and carry it around your neck. Just like Tom Selleck in Magnum, P.I.
Everyone will feel some sort of obstacle to maneuver around during the challenge. Breaking the multi-tool habit will take a little dedication and some application of mental faculties. After all, this isn't a carry just one tool challenge. Feel free to carry a screwdriver, two screwdrivers, pliers, scissors, knife, or flashlight. Even a bottle opener. Naturally if you are a carpenter, brick mason, or auto mechanic you will use your usual tools at work. Just leave the multi at home. Along with your wife bopping club. Best wishes. Gary

-
For the record, I won't even pretend that I told friend fullbreakfast anything he didn't already know. Having a little chat on the thread is a good thing. It helps to bring the Toolbox challenge up to date and perhaps tickle someone's curiosity about the affair. Might even prompt someone to give the 30 day event a try.
About an inch of snow on the ground this morning here on Werecoyote Trail. I heard every wild canine in the area light in with a chorus of howls, yips, and squeals about 3AM. They likely found something to rip to shreds in the snow. I'm not about to go out and investigate. Best wishes. G
:ahhh -
@IMR4198 said:
As Tubah said to his son Oogla, when asked about dating advice, just go out there and get a woman like I did. Take a club and bonk one on the head and drag her to your cave. Don't bonk too hard and if she smiles at you first just give her a tiny little bop and she will pretend to be hurt as you drag her away.
Let's see what is on the opener layer of a SAK. Medium sized screwdriver, small screwdriver, can opener, not-very-good wire stripper, bottle opener. The replacement for the screwdriver part doesn't even need a comment. Can opener? Do you really use one? I'm sure you have a nice one at home. Wire stripper? Nobody serious about wire stripping on a job would use the SAK for that. That leaves bottle opener. Lots of bottles with caps here actually screw off. Anything that doesn't is easily opened with a plier. In a pinch the screwdriver will work as well. The world is full of dedicated bottle openers. String one on a piece of twine and carry it around your neck. Just like Tom Selleck in Magnum, P.I.
Everyone will feel some sort of obstacle to maneuver around during the challenge. Breaking the multi-tool habit will take a little dedication and some application of mental faculties. After all, this isn't a carry just one tool challenge. Feel free to carry a screwdriver, two screwdrivers, pliers, scissors, knife, or flashlight. Even a bottle opener. Naturally if you are a carpenter, brick mason, or auto mechanic you will use your usual tools at work. Just leave the multi at home. Along with your wife bopping club. Best wishes. Gary

It's not so much that it can't be done, but how to choose the several items I will need to replace these two small pieces of metal weighing a few grams each. Part of this is that for what I carry all the time in my pocket, I like to keep it fairly small and light. I don't want to end up with a heavy pouch that keeps trying to pull my trousers down.
Screwdrivers: You have small and large flathead, plus of course good-in-a-pinch Phillips screwdriving with the can opener. I can carry a small bit driver or ratchet and three or four bits to cover this.
Wire stripper: Don't use it, won't try and replace it.
Can opener: Hardly ever use it to open cans, won't try and replace that function.
Bottle opener: Do use it fairly often for a beer. Of course every EDC item seems to have a bottle opener on it, but that doesn't help for the challenge as it's an added feature on a multi-functional tool. Like you say pliers can do it, but I don't really want to carry pliers. Screwdriver can do it, but inelegant / will make my wife look at me like I'm insane. Small dedicated bottle opener is probably justified.
Small pry: The bottle opener is often used by me for small prying, like opening a can of paint. Need a small pry bar. Within challenge rules this is not so easy, as nearly everyone who makes mini pry bars can't resist adding functions - bottle opener, bit driver, multi-wrench, 80mm grenade launcher, etc. I have a bunch of pry bars because I'm a dork, and I think there are only two that would qualify, and that are actually useful and light enough that I would want to carry them. And one of those I'm not sure about.
Micro pry: I often use the tip of the can opener for such tiny tasks as prying out button batteries, getting under a jar lid, etc. Not sure yet what I will be using for this.
Scraping: I use the rounded polished edge of the bottle opener for scraping where I'm worried about damaging the surface underneath, and sometimes the sharp edge of the can opener where I'm not so worried. Not sure if either of the pry bars I have in mind are going to be very good for covering this.
Of course, working out solutions to these 'problems' is where the fun of the challenge is!
-
@IMR4198 said:
For the record, I won't even pretend that I told friend fullbreakfast anything he didn't already know. Having a little chat on the thread is a good thing. It helps to bring the Toolbox challenge up to date and perhaps tickle someone's curiosity about the affair. Might even prompt someone to give the 30 day event a try.No sweat, I'm enjoying the idle chat!
-
I have had these same arguments in my head between me and myself. Sometimes waking at 3 AM, only to realize I am loosing the battle and just need to relief myself 😳
I do have a kit bag with my dedicated tools, and have started to clean out the debris, and exam the tool clutter. But this will be my HOME, tool kit.
My comfort will be a TRADITIONAL POCKET KNIFE, maybe a STOCKMAN, a COPPERHEAD, CANOE, or a SOD BUSTER.
I have concluded, my brain and self control will be my best secondary method to deal with this the month of December. I will not, I do not have to be the FIX-IT guy. I will let others try to be the hero and impress the fools who are never prepared. I will live with my decision knowing that “if I wanted, I could have done it!”
My pockets will be lighter, my belt will not have anything dangling, I WILL BE SLIM AND TRIM.
MISSING MY VAGABOND, but my coin purse will have a couple of plastic toothpicks, currently my most used secondary tool on any of my SAKs😉
My method to overcome these challenge restrictions. I am at peace with my solution(s).
(How long can I last? Can I avoid my fidget addiction of a MT)
-
Additional thoughts. Several sun cycles later.
I have begun, putting gadgets away, moving upstairs to my ROOM, out of sight out of mind!
Now thinking, a couple jig saw puzzles may serve a purpose, should I buy more snacks?, …
-
We can never have too many snacks, I say. Maybe we could find a couple of DVDs to watch. Something with no multi-tools in it. Maybe Ben Hur or maybe 300. Spartans didn't need any Leatherman things. No cans to open or screws to screw with back in the good old days.
There are still a few days left to sign up for the challenge. Early registration is free. You will have to chip in a dime each to pay for coffee cups. Either that or bring your own mug.
Best wishes. Gary

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login