December 2025 Tool Box Challenge
-
@LoopCutter said:
Also, the sensors you observed at your Walmart and other stores were not configured for metal detection, though they can be and are used at schools, hospitals, government buildings and even airports.At retail stores they are configured to sense a RFID tag that is placed into packages, or price tags, even clam shells packages. Often items valued above $8 retail.
RFID = Radio Frequency Identification. These broadcast a signal, if close to a sensor an alarm will go off.
When you scan your purchase, that RFID tag is disabled or turned off. If the internal battery is exhausted, the tag is of no value, however I am not aware of the battery life cycle. It was suspected a year or more!I suspect most of the RFID tags used in stores are the passive type, meaning they are powered by a signal from the reader and don’t have their own battery.
-
I found the 2 screwdrivers I was searching for!
Concept is two carry items in this pouch,
Mini pipe wrench for plier needs, added a color complimenting short lanyard for pouch extraction.
And adding a Wuben G5
I plan to move the pouch from carry bag or coat pocket to another as needed.
Presently I have items already in pockets or on the counter.
Plus a traditional pocketknife will also be pocket carried as I currently do, but just one not two or three.

-
Nice photo. That should give some folks a good idea of where to go with this thing. I think our friend Vidar said something about not carrying much, maybe just a SAK. That makes sense when you have all your work tools already organized and probably permanently located in your workplace. Not something he carries with him at all. Tools are for work, the SAK is for daily carry.
A SAK is a pretty good knife. Okay screwdriver maybe. Depending on the screws. Awl. Something to open a bottle or can. Maybe scissors. None of these things are really primary use tools. I think it is safe to say our friend LoopCutter will dig up a great knife to carry. He already has some good screwdrivers in his dedicated pouch. If he needs scissors or something to open food or drink containers, that will be easy to add. Maybe he doesn't need that sort of thing? He has a good flashlight. First class pliers.
Your EDC Toolbox carry may not look like his. Might need a Zippo or a Bic disposable. Might just carry a knife. Nothing in the rules to forbid carrying two or three knives. Minimal carry, or all out. You get to decide. Just no multis. Find your needs have changed after a day or two of carry? Change it up. Best wishes. Gary
:D -
Changing it up and showing different items will be part of the fun. The fun starts in nine days!
-
I am having a turkey sandwich for lunch today. I looked in the fridge yesterday and saw the turkey was thawed out nicely. Next thing I knew I was boning out the turkey and preheating the oven. It happened just like that. If I had planned it, I would have had a nice sweet potato roasting at the same time. That's how the turkey sandwich happened.
I am digging out some stuff and doing a little pre-challenge carry trials. Seeing what works and what doesn't. Several members expressed interest in the challenge. Either on the thread or by PM. I will be reminding them in the next day or two. Just to let them know it is still on. It won't be long before the start. Best wishes. G

-
@IMR4198 said:
Feel free to add your name to the list if you choose. I can practically guarantee that not carrying a multi-tool/SAK for a month isn't fatal. If worse comes to worse and your nerves begin to fail, you can always just drop out. Or mark your name off the list before the beginning.
I didn't mention it specifically, but carrying a Katana would be legal. Be sure to tell the police when they stop you that IMR4198 said it was legal. That way they won't put you in jail. That is a big plus. The food in mental facilities is much better than most lockups.
Best wishes. Gary (IMR)
:ahhhPS. I see from your late edit that you made the list. Good on you. Anyway the reference to the LATEST Leatherman folding knives being legal is in contrast with their earlier folding knives. Some of them had gut hooks, internal bit storage, etc. Not legal. Also just being Leatherman brand doesn't disqualify automatically. Depends on the on-board equipment of said Leatherman. Single function only. Best wishes. G
Ok, I'm in. As long as I can carry a Type 38 Arisaka along with my katana! Loaded with handloads using IMR4198 powder, of course!
Nah, j/k. I have neither a Katana nor an Arisaka, although I would like to have both! I'm in anyway, though.
- AzteCypher
- IMR4198
- ReamerPunch
- Farmer X
- fullbreakfast
- nate j
- LoopCutter
- Humayd
- Gra_farmer
- cody6268
- WECSOG
-
I used to shoot a Type 99. Welcome aboard. Best wishes. G
:ahhh -
So, here's a question: are these electrician's scissors allowed? They have a couple of small notches for wire stripping, but I don't use that feature. In fact I think the actual scissors part does a better job of stripping wires.

-
I look at those Klein scissors as a single purpose electrician's tool. Pliers were allowed in the last challenge with gripping and wire cutting features built in. That is just the way they have always been. Cut the wire. Twist connections, etc.
If friend ReamerPunch would like to voice his opinion on the scissors, it would be welcome. In fact if he were to say no, I would defer to his judgment in the matter.
Whether or not you use a feature on a tool doesn't really matter as far as eligibility. One couldn't use just the pliers on a SOG for instance and not use the other tools. Not allowed.
So, I will say allowed pending possible agreement or objection. Not a final judgment, as I might change my mind.
Best wishes. G

-
@IMR4198 said:
I look at those Klein scissors as a single purpose electrician's tool. Pliers were allowed in the last challenge with gripping and wire cutting features built in. That is just the way they have always been. Cut the wire. Twist connections, etc.
If friend ReamerPunch would like to voice his opinion on the scissors, it would be welcome. In fact if he were to say no, I would defer to his judgment in the matter.
Whether or not you use a feature on a tool doesn't really matter as far as eligibility. One couldn't use just the pliers on a SOG for instance and not use the other tools. Not allowed.
So, I will say allowed pending possible agreement or objection. Not a final judgment, as I might change my mind.
Best wishes. G

Not that my opinion signifies, but it would be an awfully strange world if I was allowed to carry my Knipex combi pliers - with their needle nose, nail hole, gripping section and wire cutters - and those scissors were not allowed.
-
@IMR4198 said:
If friend ReamerPunch would like to voice his opinion on the scissors, it would be welcome. In fact if he were to say no, I would defer to his judgment in the matter.I would allow it. I have the exact same model, and the additional features are afterthoughts, at least on my unit.
You do not have to defer to my judgement for anything, though. You are hosting this now, so the rules are up to you, as long as they make sense regarding the badge. You could be extremely strict, and not allow pliers because they also have wire-cutters. I was ok with a Skeletool KXB knife even though the pocket clip is also a bottle opener, because everything is a bottle opener. I was not that strict, because it was the first time the challenge was being done and the badge was not in the list, so I wanted as many people to join as possible. But the awesome mods allowed the badge despite low numbers.

I am more than happy to offer my opinions but if something is in the gray, we can decide together if it qualifies or not.

-
I welcome your input on the question, RP. I respect your thoughts and know there wouldn't even be a badge if you hadn't taken it in hand to create one and run the original challenge.
There has always been a tendency to dilute challenges here. There is no way (nor should there be) to figure out if someone is keeping to the rules. That has always been a question of agreement to follow the rules of the challenge. These things can be entertaining, or they can be meaningless. Depends on the individual.
It is pretty easy to guess which individuals are actually keeping up with the challenge and interacting with the other members. The personal connections and 'playing along' are 98% of the fun in any challenge. The badges are a pretty decoration but shouldn't be the reason for joining in on a challenge.
I ran a challenge where two members had no connection to anyone else there. Obviously never read any of the posts. Never answered anything they were asked. Zero conversation or comments with anyone else. Didn't pitch in on a single one of the weekly mini-challenges and probably never realized there was such a thing. Posted the same photos they did on another challenge 100% of the time. They got a meaningless badge anyway. Nothing contributed, nothing gained. Just wasted their self-centered time for a month.
We have a pretty good bunch here this time. I think. I haven't had a lot of interaction with everyone. I have no problem with making judgment calls but have no desire to be a dictator either. I like to think that I am open to at least hearing (and considering) input. I like to hear from MTO members who didn't or couldn't join in the challenge and listen to what they say as well.
Best wishes. Gary (IMR)

-
Just to chime in on the scissor’s question!
Yes, it should be allowed! It is a single purpose tool even with the stripping notches.
The scissors are very practical and if I had mine, they would part of my kit.
Unfortunately, they part of my tool grip when started my construction gig. That kit was stolen when my truck was broken into, and ran sacked by some cowardly thieves.
The scissors are single function built to make life easier for communication (phone) techs working with 22 - 24 size wire on punch down boards and D-Marks.
I really should look for a replacement pair. Best darn scissors I ever used.
And, that’s my opinion 🫣
-
I have those scissors as well. No stripping notches on mine, but it is easy to cut and strip wire with them anyway. I use mine for all sorts of little household chores. Best wishes. Gary
[attach id=0 msg=2553760]
-
In the short time you took to reply, I skipped over and searched the auction site.
😱. The prices? My lord!
Oh I like those Gary! Watch them closely, hate to see a Raccoon sneak away with them.
-
-
The scissors I keep in my tool bag are these ones:


which are what I'd call heavy duty. More than I need for the everyday, and too thick and heavy to be part of my kit for the challenge. But you can really put some pressure on these without hurting your fingers, if you need to. They will cut some things that I wouldn't have thought they could.
-
Thanks for everyone's input on the scissors!
I would have been fine with choosing something different, but I'm happy that these are ok because they are awesome EDC scissors; in fact I carried them every day for years. I bought an old Chevy truck in the late '90s and these were in the glovebox. The truck eventually got stolen, but at least I still have the scissors! 
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login