* Supertool Saturday *
-
SuperTool Saturday
[attach id=0 msg=2553311]
ST300 pretending to be a light pole in a VANCOUVER neighborhood.

-
Great start to STS, LC

-
Happy to be here on Super Tool Saturday

I have been making some adjustments to my ST this morning.

-
Nice!

-
There are some awesome ST300 being carried today. Great job LC, Steve and Adam!

JonesE
-

I have been wondering how easy it was to remove the bail sort of thing holding the keyring and chain to the small Opinels. Today I grabbed Silver and gave it a go.
[attach id=0 msg=2553394]
It was easily removed. I think the little dings around the hole were caused by the bail thing flopping around (especially when it trapped the chain). I'll eventually get some cord that's the right size and make a lanyard for the Opinel.
[attach id=1 msg=2553394]
.jpg)
.jpg)
-
Looking good Farmer. I really like the green on the OPINEL.

JonesE
-
I discovered that micro or nano cord (3/64" and 1/32," respectively) would work well for these little Opinels. 95 cord is a little too big unless you melt one of the ends just right. -
Happy STS


-
Happy SUPERTOOL Saturday
Winter prep, storm to arrive at 2PM in my neighborhood, actual snow started after 10AM
I was behind on preps. Rose early to convert my garage from lawn mode to snow mode, but lawn mower into its corner, folded down handle, drained gas, and placed where the snow blower sat all summer.
Then prepped the blower, gas, choke, prime and pulled, first pull came to life. Then put everything away in the seasonal place.
The ST300 was used to loosen handle screws, removed tire air valve caps.
Then moved attention to AWD SUV, insure tires are all inflated now that temperatures are below freezing, 34PSI. It is important that on a AWD, tires are identical, and on mine there are PSI sensors that report each tires PSI to the traction control system.
Picture is the ST3, assisting my numb fingered with valve cap removals as I went from tire to tire with the portable pump.
[attach id=0 msg=2554297]
Last Saturday I will share in 2025, committed to the Toolbox Challenge. No MTs to be utilized.

-
Nice ones Adam and Gordon

Locks Up !
.jpg)
-
The entire SuperTool range was covered today. Great work, y'awl!

I found a loose drawer pull on the dresser. Blackie handled it with no issues.
[attach id=0 msg=2554350]
The dresser drawer was empty at the time because today was a laundry day.
[attach id=1 msg=2554350]
.jpg)
.jpg)
-
I am sure you will find that Blackie will handle most anything you throw at it

-
Yes indeed. The loose drawer pull was cake.
-
Awesome STS pics, guys

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
