December 2025 Tool Box Challenge
-
You wanted photos?
[attach id=0 msg=2554520]
Driveway area[attach id=1 msg=2554520]
Front view[attach id=2 msg=2554520]
The back yard, trees are bare. Snow has settled from sun and wind.[attach id=3 msg=2554520]
My back yard with about 60% of leaves hanging this fall.



-
@LoopCutter said:
You wanted photos?[attach id=0 msg=2554520]
Driveway area[attach id=1 msg=2554520]
Front view[attach id=2 msg=2554520]
The back yard, trees are bare. Snow has settled from sun and wind.[attach id=3 msg=2554520]
My back yard with about 60% of leaves hanging this fall.Very nice back yard you have there.
-
So far today we have friend Reamer miles ahead on the ratchet game. I noticed that he has changed his flag back to Australia. Excellent photos as usual. Friend Looper has posted the incredible snow pix as well as the nicest pocky nife. IMR has taken a temporary lead in the plier division with no other entry. Yet. Yes, it is pliers and not plyers. Also a notable entry in the ugliest watch category.
More to come today. Assuming I didn't bore/anger any entrants with my comments leading up to the start date.
Best wishes. G
:ahhh -
@fullbreakfast said:
Very nice back yard you have there.Thank you,

I must share, credit goes to my wife back several years, as there were no trees present in our yard when we moved here in 1986. It had grass and a split rail fence outlining the yard.
Every tree seen was placed my me, cursing as I dug out the hole from dense clay. Some Pines have been removed, planted to close as they spread out, but made good as fire wood for the fire pit.Now I curse the trees each fall as the leaves drop. Yet enjoy the shade coverage every hot afternoon summer day. 😊
-
Day 1
The December pouch is sitting in my pocket like a brick. There are three layers to it.
Content of front slots:

From left to right: capsule toolkit (I will get into the contents of this another day); Companion X Alox; 60mm 1/4" bit extension, loaded with a bottle-opener bit; 711L micro-ratchet with a 40mm 1/4" to 4mm adapter in the socket; Swiss Army 2.
Before Hildegaard starts to reach for the hornet spray, I will show her that the SAKs are mono-functional:

Behind that layer is an open pocket which contains:

Credit card; Rite in the Rain notebook; Aerocrafted Sideslip utility knife; Big I Designs mini bolt-action pen.
Then behind that is a side-zip pocket:

In here there's a tray of 4mm precision bits, a selection of 1/4" bits, and a cardboard bobbin with some extra-strong thread wound on it.
-
Day 1
Clockwise from the top:
Case 3375 Stockman in CVModded LED flashlight. Started as a cheapo with the typical, horrible cool temp emitter and a 3-AAA battery holder. I modded it with a warm temp, high CRI emitter and 18650 rechargeable cell.
Klein scissors (from the '67 Chevy truck)
Zebra F-701 pen, modded with a Space Pen insert
Cheapo screwdriver, bought recently for $2.27 at Walmart
Boker automatic knife
Vise Grips
Nit-Eyes Pock-Its XL; my second one. Thinking about getting a new one.
Casio M5610U G-Shock

-
@IMR4198 said:
Do you usually carry the other two plier-based tools along with a Supertool? Several members are going to have to give up their Mini Champs. That seems to be a key-chain favorite here. Best wishes. G

I carry the two smaller plier-based tools in my Leatherman tool pouch, which I use as a wallet. The PowerPint is for me and the PS4 is for my grandson.
The Mini Champ is going to be tough to do without. -
@WECSOG said:
Day 1
Clockwise from the top:
Case 3375 Stockman in CVModded LED flashlight. Started as a cheapo with the typical, horrible cool temp emitter and a 3-AAA battery holder. I modded it with a warm temp, high CRI emitter and 18650 rechargeable cell.
Klein scissors (from the '67 Chevy truck)
Zebra F-701 pen, modded with a Space Pen insert
Cheapo screwdriver, bought recently for $2.27 at Walmart
Boker automatic knife
Vise Grips
Nit-Eyes Pock-Its XL; my second one. Thinking about getting a new one.
Casio M5610U G-Shock
Cool flashlight mod

I really love my Pock-its XL. It is like having a tool box on my belt :D
-
@fullbreakfast said:
Day 1The December pouch is sitting in my pocket like a brick. There are three layers to it.
Content of front slots:

From left to right: capsule toolkit (I will get into the contents of this another day); Companion X Alox; 60mm 1/4" bit extension, loaded with a bottle-opener bit; 711L micro-ratchet with a 40mm 1/4" to 4mm adapter in the socket; Swiss Army 2.
Before Hildegaard starts to reach for the hornet spray, I will show her that the SAKs are mono-functional:

Behind that layer is an open pocket which contains:

Credit card; Rite in the Rain notebook; Aerocrafted Sideslip utility knife; Big I Designs mini bolt-action pen.
Then behind that is a side-zip pocket:

In here there's a tray of 4mm precision bits, a selection of 1/4" bits, and a cardboard bobbin with some extra-strong thread wound on it.
4mm and 1/4" bits

That is something I would do if I had a need for 4mm bits here in the States. -
@LoopCutter said:
Started snowing Saturday at 10:30 AM. Not the big fluffy lake effect snow flakes, but the little icey pellets that sting when they hit the skin.Had 5” by 4PM and 11” by 10 PM
So yes, heavy wet snow. The howling winds most Sunday. I was able to get my garage switched from lawn care to snow removal and my big Tim the TOOLMAN SNOW BLOEER STARTED on the second pull and was ready to go.
But, a neighbor got a new to him blower and did my driveway before 10 AM. So I was prepared but denied the pleasure😎Cold temps have grip. Presently 12 degrees F at 8:25 AM this MONDAY.
And I was grumbling this morning about it being 36°F and windy

Stay warm!
-
Day 1
Here is what I carry during the week:

One thing missing from the pic above is my workknife:

-
Great start awl.
I don't know if I could go a month without a SAK and MT. Got about 10 hours to figure it out though. 
-
It's just a 'mind over
mattermulti' sort of deal. You're a fixed blade man, right? There's one single based tool right there. Poke a Knipex and a screwdriver in your pocket and you're ready to go. Number 13 on the sign-up sheet is already taken, so you don't have to worry about bad luck. Best wishes. Gary
:D -
-
@fullbreakfast said:
Day 1The December pouch is sitting in my pocket like a brick. There are three layers to it.
Content of front slots:

From left to right: capsule toolkit (I will get into the contents of this another day); Companion X Alox; 60mm 1/4" bit extension, loaded with a bottle-opener bit; 711L micro-ratchet with a 40mm 1/4" to 4mm adapter in the socket; Swiss Army 2.
Before Hildegaard starts to reach for the hornet spray, I will show her that the SAKs are mono-functional:

Behind that layer is an open pocket which contains:

Credit card; Rite in the Rain notebook; Aerocrafted Sideslip utility knife; Big I Designs mini bolt-action pen.
Then behind that is a side-zip pocket:

In here there's a tray of 4mm precision bits, a selection of 1/4" bits, and a cardboard bobbin with some extra-strong thread wound on it.
Excellent toolbox carry!

Who sells that 4mm bit container? That's neat!
-
I knew my locking plier and watch entry would be surpassed quickly. It felt good while it lasted. I might have to try another pair of pliers?
The very vigilant Hildegaard is still ailing with a stiff neck. She wanted me to do the BenGay treatment for her. I told her I would help. The old fellow who blows leaves around the neighborhood gave me an idea. I said that Miss Hildegaard wanted her leaves blown and he should just walk right in and ask if she needed anything. He went in and didn't come out. Finally, I had to know, so I stood on a milk crate and looked in. Sure enough, he was doing a workmanlike neck massage on the old girl with the tube of cream. I feel a little like Cupid.
Best wishes. G

-
@IMR4198 said:
So far today we have friend Reamer miles ahead on the ratchet game. I noticed that he has changed his flag back to Australia."Miles"? What are these "miles" you speak of?
I am kilometers ahead. My holiday in Greece ended so I am back here, so I changed the flag. Now I can write things like "Amazon doesn't deliver ferro rods here" instead of writing "Amazon doesn't deliver ferro rods to Australia", saving me 0.3 seconds. It builds up to almost 3 full seconds a month. 
-
@ReamerPunch said:
My holiday in Greece ended so I am back hereI wrote that instead of writing "back to Australia". Boom. 0.3 seconds saved. Flags are amazing.

-
@ReamerPunch said:
Excellent toolbox carry! :like:
Who sells that 4mm bit container? That's neat! :cheers:Thanks :cheers:
Since basically nobody seems to sell bit racks for 4mm bits I was glad to get these. I got them from Amazon UK, they are from one of those Chinese no-brand brands called "qiipii":
They were cheaper than that when I got them and I wouldn't pay that price for four empty trays, useful though they are. But I notice the same people will sell you the four trays containing a 38-piece bit set for only slightly more:
which is a bargain, unless the bits are total crap.
-
Day 1
A US Shelby Co P-51 can opener, the larger cousin of the perhaps better known P-38.
This one has replaced the Vic Alox Bantam that was normally in my wallet, at least for the duration of this challenge. And after the experience detailed in the “Combo Tool Fail” thread, this change may be permanent, as one of the main reasons I carried the Alox Bantam was so that I would always have a can opener.
Rust may ultimately be an issue, but P-51s are cheap enough (as of this writing, a ten-pack is $12 or $13 on the big river site) that I’m fine if it has to be discarded and replaced once or twice a year.
Additionally, because of the low cost and the fact that it is only a can opener with no knife blade, I would be OK trying my luck with it at security checkpoints, and being out the $1.25 or so if it gets confiscated.
Also absent from my wallet for this challenge is my PWII, but I do plan to put that back in after this challenge. Don’t tell Hildegaard, but I suspect the P-51 could handle some light to medium prying and even perhaps some flat head screws if the need arose.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login