December 2025 Tool Box Challenge
-
Great start awl.
I don't know if I could go a month without a SAK and MT. Got about 10 hours to figure it out though. 
-
It's just a 'mind over
mattermulti' sort of deal. You're a fixed blade man, right? There's one single based tool right there. Poke a Knipex and a screwdriver in your pocket and you're ready to go. Number 13 on the sign-up sheet is already taken, so you don't have to worry about bad luck. Best wishes. Gary
:D -
-
@fullbreakfast said:
Day 1The December pouch is sitting in my pocket like a brick. There are three layers to it.
Content of front slots:

From left to right: capsule toolkit (I will get into the contents of this another day); Companion X Alox; 60mm 1/4" bit extension, loaded with a bottle-opener bit; 711L micro-ratchet with a 40mm 1/4" to 4mm adapter in the socket; Swiss Army 2.
Before Hildegaard starts to reach for the hornet spray, I will show her that the SAKs are mono-functional:

Behind that layer is an open pocket which contains:

Credit card; Rite in the Rain notebook; Aerocrafted Sideslip utility knife; Big I Designs mini bolt-action pen.
Then behind that is a side-zip pocket:

In here there's a tray of 4mm precision bits, a selection of 1/4" bits, and a cardboard bobbin with some extra-strong thread wound on it.
Excellent toolbox carry!

Who sells that 4mm bit container? That's neat!
-
I knew my locking plier and watch entry would be surpassed quickly. It felt good while it lasted. I might have to try another pair of pliers?
The very vigilant Hildegaard is still ailing with a stiff neck. She wanted me to do the BenGay treatment for her. I told her I would help. The old fellow who blows leaves around the neighborhood gave me an idea. I said that Miss Hildegaard wanted her leaves blown and he should just walk right in and ask if she needed anything. He went in and didn't come out. Finally, I had to know, so I stood on a milk crate and looked in. Sure enough, he was doing a workmanlike neck massage on the old girl with the tube of cream. I feel a little like Cupid.
Best wishes. G

-
@IMR4198 said:
So far today we have friend Reamer miles ahead on the ratchet game. I noticed that he has changed his flag back to Australia."Miles"? What are these "miles" you speak of?
I am kilometers ahead. My holiday in Greece ended so I am back here, so I changed the flag. Now I can write things like "Amazon doesn't deliver ferro rods here" instead of writing "Amazon doesn't deliver ferro rods to Australia", saving me 0.3 seconds. It builds up to almost 3 full seconds a month. 
-
@ReamerPunch said:
My holiday in Greece ended so I am back hereI wrote that instead of writing "back to Australia". Boom. 0.3 seconds saved. Flags are amazing.

-
@ReamerPunch said:
Excellent toolbox carry! :like:
Who sells that 4mm bit container? That's neat! :cheers:Thanks :cheers:
Since basically nobody seems to sell bit racks for 4mm bits I was glad to get these. I got them from Amazon UK, they are from one of those Chinese no-brand brands called "qiipii":
They were cheaper than that when I got them and I wouldn't pay that price for four empty trays, useful though they are. But I notice the same people will sell you the four trays containing a 38-piece bit set for only slightly more:
which is a bargain, unless the bits are total crap.
-
Day 1
A US Shelby Co P-51 can opener, the larger cousin of the perhaps better known P-38.
This one has replaced the Vic Alox Bantam that was normally in my wallet, at least for the duration of this challenge. And after the experience detailed in the “Combo Tool Fail” thread, this change may be permanent, as one of the main reasons I carried the Alox Bantam was so that I would always have a can opener.
Rust may ultimately be an issue, but P-51s are cheap enough (as of this writing, a ten-pack is $12 or $13 on the big river site) that I’m fine if it has to be discarded and replaced once or twice a year.
Additionally, because of the low cost and the fact that it is only a can opener with no knife blade, I would be OK trying my luck with it at security checkpoints, and being out the $1.25 or so if it gets confiscated.
Also absent from my wallet for this challenge is my PWII, but I do plan to put that back in after this challenge. Don’t tell Hildegaard, but I suspect the P-51 could handle some light to medium prying and even perhaps some flat head screws if the need arose.

-
Had a pry job this evening and I used this setup:

It got the rubber stopper out of this demijohn of affinata we concocted:

Getting that thing out is never easy as I bang it in tight to prevent the booze evaporating. I managed it. I think it's a bit easier using a SAK, but there's not a lot in it.
-
@LoopCutter said:
Thank you,
I must share, credit goes to my wife back several years, as there were no trees present in our yard when we moved here in 1986. It had grass and a split rail fence outlining the yard.
Every tree seen was placed my me, cursing as I dug out the hole from dense clay. Some Pines have been removed, planted to close as they spread out, but made good as fire wood for the fire pit.Now I curse the trees each fall as the leaves drop. Yet enjoy the shade coverage every hot afternoon summer day. 😊
It's very satisfying to see the things you planted grow. We moved house recently after twelve years, and one of my few regrets is that I won't see the trees and shrubs we put in develop.
The garden at the new place is pretty well-stocked with trees though. including apples and pears.
-
@fullbreakfast said:
Thanks :cheers:Since basically nobody seems to sell bit racks for 4mm bits I was glad to get these. I got them from Amazon UK, they are from one of those Chinese no-brand brands called "qiipii":
They were cheaper than that when I got them and I wouldn't pay that price for four empty trays, useful though they are. But I notice the same people will sell you the four trays containing a 38-piece bit set for only slightly more:
which is a bargain, unless the bits are total crap.
Having them in that tray is nice, since it will be flat.
I used to have 14 bits in a chapstick tube, but now I carry them in a tiny tic-tac box. 13 bits and the adapter.
Or 15 bits without adapter. :cheers:
-
Day 2
Had to replace two snap button tops in my cargo pants.

-
@IMR4198 said:
I assume ViseGrip is a trademark for the same sort of tool.It is.
@LoopCutter said:
My 75 Stockman is the first selection, the three blades will provide ample cutting options.Nice 75s!
I have a 3XXX CV that would fit in this challenge pretty well.We are off to a great start!
Day 1
I'll start off with the Fiskars X-7. I do suppose the butt could be used as a makeshift hammer, but Fiskars doesn't list it as such. Recently I very nearly used it in that manner, but common sense prevailed. The handle wrap and lanyard were added before challenge commencement. Sadly, there isn't an action photo, as I endeavor to stay inside as much as possible when the temperature is below freezing.
[attach id=0 msg=2554596]

-
That is some first class paracord work. Did you get any snow up your way? Just rain here. Let's see.... I think you have the first place in yummy hand axe. Best wishes. G

-
Day 1:
Waited most of the day for FedEx to deliver my new Bambu A1. As of right now, it's sitting at "date to be updated soon" yet still "Out For Delivery". I don't know if it will be delivered tomorrow due to the storm or not.
That being said, I got some work done. In the basement, there's only like 3-4 real outlets (with about another 4 being in the side of light fixtures or two-prong). I have planned for three power strips (PC, 3D printer, living area) from Harbor Freight that have 15-foot cords.
For now, it's a mess of extension cords and surge protectors.
At the present, the PC is powered by my shop roll-up 50-foot extension cord. I keep tripping over the cord, so I just barely tacked up some cable staples to hold it alongside the floor joist. I plan to reuse the staples for the power strips once I'm done.
Tool used--I couldn't find the old 13-oz Belknap that's my go-to hammer. Thus, I decided to break in my third mini hammer--a Kobalt I bought last month. I mostly use these as tack hammers, but it sunk the cable staples quite well. These shorter handles offer pretty good control.
[attach id=0 msg=2554603]

-
Day 2
No snow here, just a cold all night rain. I used my electrician's shears to open some meal. I took a photo of the bread as well. I'm not sure why. Jiffy cornbread mix. It is edible. Too sweet. Cornbread shouldn't be sweet. The simulated ViseGrips were a little bulky, so I think I might carry something else today. I think some toad-like creature occasionally creeps out from a hidden doorway and eats some of my stuff. Socks, a baseball cap, my box of tea. This time it must have swallowed one of my flashlights. I can't find it anywhere. I think I will cook some biscuits. Assuming that warty fiend hasn't taken my flour.Best wishes,
G
[attach id=0 msg=2554633] [attach id=1 msg=2554633] [attach id=2 msg=2554633]


-
I should have identified the EDC items. The yellow screwdriver is an old Snap-On that I had forgotten I owned. Gerber flashlight (not the one that got lost/eaten.) The canoe is a Ruff Rida. Small Diamond Tool pliers. Best wishes. G

-
@ReamerPunch said:
Having them in that tray is nice, since it will be flat.
I used to have 14 bits in a chapstick tube, but now I carry them in a tiny tic-tac box. 13 bits and the adapter.
Or 15 bits without adapter.
That’s a pretty neat carry, for cases where you don’t need flatness. I used to use tiny tins that I got Herbin ink cartridges in for this. Though that had the disadvantage that, with them being metal, you couldn’t see what you had without taking the top off.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

