December 2025 Tool Box Challenge
-
That is some first class paracord work. Did you get any snow up your way? Just rain here. Let's see.... I think you have the first place in yummy hand axe. Best wishes. G

-
Day 1:
Waited most of the day for FedEx to deliver my new Bambu A1. As of right now, it's sitting at "date to be updated soon" yet still "Out For Delivery". I don't know if it will be delivered tomorrow due to the storm or not.
That being said, I got some work done. In the basement, there's only like 3-4 real outlets (with about another 4 being in the side of light fixtures or two-prong). I have planned for three power strips (PC, 3D printer, living area) from Harbor Freight that have 15-foot cords.
For now, it's a mess of extension cords and surge protectors.
At the present, the PC is powered by my shop roll-up 50-foot extension cord. I keep tripping over the cord, so I just barely tacked up some cable staples to hold it alongside the floor joist. I plan to reuse the staples for the power strips once I'm done.
Tool used--I couldn't find the old 13-oz Belknap that's my go-to hammer. Thus, I decided to break in my third mini hammer--a Kobalt I bought last month. I mostly use these as tack hammers, but it sunk the cable staples quite well. These shorter handles offer pretty good control.
[attach id=0 msg=2554603]

-
Day 2
No snow here, just a cold all night rain. I used my electrician's shears to open some meal. I took a photo of the bread as well. I'm not sure why. Jiffy cornbread mix. It is edible. Too sweet. Cornbread shouldn't be sweet. The simulated ViseGrips were a little bulky, so I think I might carry something else today. I think some toad-like creature occasionally creeps out from a hidden doorway and eats some of my stuff. Socks, a baseball cap, my box of tea. This time it must have swallowed one of my flashlights. I can't find it anywhere. I think I will cook some biscuits. Assuming that warty fiend hasn't taken my flour.Best wishes,
G
[attach id=0 msg=2554633] [attach id=1 msg=2554633] [attach id=2 msg=2554633]


-
I should have identified the EDC items. The yellow screwdriver is an old Snap-On that I had forgotten I owned. Gerber flashlight (not the one that got lost/eaten.) The canoe is a Ruff Rida. Small Diamond Tool pliers. Best wishes. G

-
@ReamerPunch said:
Having them in that tray is nice, since it will be flat.
I used to have 14 bits in a chapstick tube, but now I carry them in a tiny tic-tac box. 13 bits and the adapter.
Or 15 bits without adapter.
That’s a pretty neat carry, for cases where you don’t need flatness. I used to use tiny tins that I got Herbin ink cartridges in for this. Though that had the disadvantage that, with them being metal, you couldn’t see what you had without taking the top off.
-
Day 2
To start, a clean look of the back yard, fresh snow as 5” or more of snow fell after dark for a few hours.
[attach id=0 msg=2554660]
Selecting my Barehead Tribsl Lock for my carry today, oops have not used since before summer.
[attach id=1 msg=2554660]
Bolster requires a good wipe down
left in a leather slip![attach id=2 msg=2554660]
Wiped down both Tribals. After picture.[attach id=3 msg=2554660]
My carry today, a CASE Barehead Tribal, and my pocket driver,(already used this morning for flat head screw) and
Want to try pocket carry of the BO tiny pipe wrench.



-
@LoopCutter said:
Want to try pocket carry of the BO tiny pipe wrench.I have one of those arriving today, in the silver flavor.

I got this slip sheath on Etsy, which fits the 4" and 5" Knipex Cobra and Pliers Wrench. It would prolly work fine with your 4" Workpro. -
MINI CHALLENGE DEC 5
There will be a mini-challenge on Friday, Dec 5. It is the Three of a Kind Challenge. Participants will be required to make their daily post consisting of three EDC items that are the same color. You pick the color. Items don't have to be tools. They could be any sort of EDC item, such as keys, phone, bandanas, pouches, lighters, etc. As long as there are no multis and they are all the same color. Three or more. Mini-challenges will proceed as follows. I will do the first one. There will be one more mini-challenge every Friday for the duration. I will also pick the host for the Dec 12 event and communicate to them by PM. They will make the rules for their own mini-challenge, and will also choose the next host for the following week. Future hosts must reply that they wish to assume the responsibility. The list of requirement for their portion must be posted at least a couple of days before Friday to allow the participants to gather things and take photos. Gather your items. I will send a PM to the next host. Acceptance is not required either. If you don't want the responsibility, let me know and I will pick someone else and keep our communications private.Best wishes. Gary
-
[attach id=0 msg=2554676]
@powernoodle said:
I have one of those arriving today, in the silver flavor.
I got this slip sheath on Etsy, which fits the 4" and 5" Knipex Cobra and Pliers Wrench. It would prolly work fine with your 4" Workpro.Thank you. I decided last night to move small workpro to the outside front pocket on the pouch.
But encountering an issue this morning expecting to use the pliers I thought I should consider pocket carry.
It does disappear in my pocket, yet catches on other objects or pocket edge.
I found this LM panache sheath works nicely. A LM slip was also tried, but the one I had handy was to big (deep)!I was going to ordered the chrome, but selected the Black. I can use on BO FRIDAY

I may yet retrieve a small needle nose from a kit that in the garage that I used for my electronic repair days.

-
I used to use one of those small, blue rubber bands (taken of a bunch of broccoli) to keep the Knipex handles together in my pocket.

-
A little late, but I am here....
DAY 1
This is my EDC wallet kit that I carry everywhere, the only difference is that I have taken the SAK classic out, as to me that is a multi tool.
So I have opted for an 100+ year old ring turn knife, the snap on it is like new, but in my ownership I have really pushed it hard, even cutting underground plastic conduit.
-
DAY 2
Here is the most used tool, my leatherman replacement
And a look at the ring-turn knife
[](https://postimg.cc/7bQJz1
ps://i.postimg.cc/NfQ6WbPk/IMG20251202185724.jpg[/img) -
Good to see you made it Gra. There looks to be several Knipex pliers and clones in the challenge. I remember the ring turn knives from sometime in the past. Maybe it was you who had one.
I have been offline for a while. Windows did a monumental update and I couldn't get back online. Also had a little migraine problem, but it is going away. I think I might have to start carrying a stubby pencil. It wouldn't be any trouble.
For those who have been wondering about Hildegaard, I saw her this morning. She came over with some cookies and said, "Hello Cowboy." I think my mouth popped open, but evidently my voice circuitry came unplugged or something. She explained that she and Eldon (the leaf blower guy) had gone line dancing or whatever you call it the night before. She walked across the lawn with her hands in the air singing something that sounded like, "boot, scoot, boogie". Might have been something else, but that is what it sounded like.
Best wishes. G -
No snow here, just a cold all night rain. I used my electrician's shears to open some meal. I took a photo of the bread as well. I'm not sure why. Jiffy cornbread mix. It is edible. Too sweet. Cornbread shouldn't be sweet. The simulated ViseGrips were a little bulky, so I think I might carry something else today. I think some toad-like creature occasionally creeps out from a hidden doorway and eats some of my stuff. Socks, a baseball cap, my box of tea. This time it must have swallowed one of my flashlights. I can't find it anywhere. I think I will cook some biscuits. Assuming that warty fiend hasn't taken my flour.Best wishes,
G
[attach id=0 msg=2554633] [attach id=1 msg=2554633] [attach id=2 msg=2554633]I had some cornbread too, a little while ago.

We had some in the fridge, left over from last week. So I had a couple square of it with butter and some pork and beans, along with a couple strips of bacon.
Not sweet. I agree with you that cornbread should not have sweetener in it. The corn provides all the sweetness it needs. -
@LoopCutter said:
Day 2To start, a clean look of the back yard, fresh snow as 5” or more of snow fell after dark for a few hours.
[attach id=0 msg=2554660]
Selecting my Barehead Tribsl Lock for my carry today, oops have not used since before summer.
[attach id=1 msg=2554660]
Bolster requires a good wipe down
left in a leather slip![attach id=2 msg=2554660]
Wiped down both Tribals. After picture.[attach id=3 msg=2554660]
My carry today, a CASE Barehead Tribal, and my pocket driver,(already used this morning for flat head screw) and
Want to try pocket carry of the BO tiny pipe wrench.Those Tribal Locks are neat knives. I've been thinking about getting one. I've always been a fan of lockbacks.
-
Day 2
Minimalist
My Case 75 Stockman, C01 flashlight, Vise Grips and a couple of screwdriver bits. These items can get me through most days. The Vise Grips lock down solidly on a screwdriver bit and work as well or better than most EDC screwdrivers, whether dedicated or multi.

-
I never tried using a ViseGrip as a quarter inch bit handle. It works fine. Also equally good when the bit is turned 90 degrees to the jaws. Lots of torque that way. Thanks for the tip. The Craftsman model that I have is the only one small enough to actually pocket carry. It seems to be as good as the original name brand tools. Might have been made in the same factory. Who knows?
Best wishes. G

-
Day 2
In the interests of science, I decided to put my bottle opening doohickey to the test:

The bottle opener bit is the "Bot-L-Bit", made by Tec Accessories. I recalled from prior use that it is about half good, and the same was found this evening. It will take the cap off a beer, but it takes two goes. The first time bends the cap but not quite enough, you then have to move it round a little and go again. It gets the job done, but I don't like the way it does it.
Two days in and a theme seems to be emerging, when it comes to prying and opening what I am carrying is not as good as if I had my usual SAK. Back to the drawing board. I think I may need to carry a dedicated bottle opener and a little pry bar.
The other thing that is becoming apparent is that I am not going to carry this pouch for a month. It is too large and heavy, and keeps trying to pull my trousers down. I am literally wearing my belt too tight to counteract this. I have no idea how guys who walk around with a 8" fixed blade and a Supertool 300 on their belt can manage that comfortably.
I can do one of two things here. Carry fewer / lighter items, or separate them into two pouches and spread the load. We are in the colder months now, and I am usually wearing a fleece with pockets or a cardigan around the house, let alone outdoors. So I could have some of the carry in there and the rest in my trouser pocket. I will try that, and if it doesn't work out will look at reducing the overall carry.
-
Day 2
I was in the office all day and didn't use any tools. So I took the attached photo when I got home. The screwdriver is a cheap 6-in-1 I bought at Lowe's. I used to use Klein multibit screwdrivers, but I have ruined too many of those in the past by using them as a chisel. So I stick with the inexpensive screwdrivers nowdays

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


