December 2025 Tool Box Challenge
-
A little late, but I am here....
DAY 1
This is my EDC wallet kit that I carry everywhere, the only difference is that I have taken the SAK classic out, as to me that is a multi tool.
So I have opted for an 100+ year old ring turn knife, the snap on it is like new, but in my ownership I have really pushed it hard, even cutting underground plastic conduit.
-
DAY 2
Here is the most used tool, my leatherman replacement
And a look at the ring-turn knife
[](https://postimg.cc/7bQJz1
ps://i.postimg.cc/NfQ6WbPk/IMG20251202185724.jpg[/img) -
Good to see you made it Gra. There looks to be several Knipex pliers and clones in the challenge. I remember the ring turn knives from sometime in the past. Maybe it was you who had one.
I have been offline for a while. Windows did a monumental update and I couldn't get back online. Also had a little migraine problem, but it is going away. I think I might have to start carrying a stubby pencil. It wouldn't be any trouble.
For those who have been wondering about Hildegaard, I saw her this morning. She came over with some cookies and said, "Hello Cowboy." I think my mouth popped open, but evidently my voice circuitry came unplugged or something. She explained that she and Eldon (the leaf blower guy) had gone line dancing or whatever you call it the night before. She walked across the lawn with her hands in the air singing something that sounded like, "boot, scoot, boogie". Might have been something else, but that is what it sounded like.
Best wishes. G -
No snow here, just a cold all night rain. I used my electrician's shears to open some meal. I took a photo of the bread as well. I'm not sure why. Jiffy cornbread mix. It is edible. Too sweet. Cornbread shouldn't be sweet. The simulated ViseGrips were a little bulky, so I think I might carry something else today. I think some toad-like creature occasionally creeps out from a hidden doorway and eats some of my stuff. Socks, a baseball cap, my box of tea. This time it must have swallowed one of my flashlights. I can't find it anywhere. I think I will cook some biscuits. Assuming that warty fiend hasn't taken my flour.Best wishes,
G
[attach id=0 msg=2554633] [attach id=1 msg=2554633] [attach id=2 msg=2554633]I had some cornbread too, a little while ago.

We had some in the fridge, left over from last week. So I had a couple square of it with butter and some pork and beans, along with a couple strips of bacon.
Not sweet. I agree with you that cornbread should not have sweetener in it. The corn provides all the sweetness it needs. -
@LoopCutter said:
Day 2To start, a clean look of the back yard, fresh snow as 5” or more of snow fell after dark for a few hours.
[attach id=0 msg=2554660]
Selecting my Barehead Tribsl Lock for my carry today, oops have not used since before summer.
[attach id=1 msg=2554660]
Bolster requires a good wipe down
left in a leather slip![attach id=2 msg=2554660]
Wiped down both Tribals. After picture.[attach id=3 msg=2554660]
My carry today, a CASE Barehead Tribal, and my pocket driver,(already used this morning for flat head screw) and
Want to try pocket carry of the BO tiny pipe wrench.Those Tribal Locks are neat knives. I've been thinking about getting one. I've always been a fan of lockbacks.
-
Day 2
Minimalist
My Case 75 Stockman, C01 flashlight, Vise Grips and a couple of screwdriver bits. These items can get me through most days. The Vise Grips lock down solidly on a screwdriver bit and work as well or better than most EDC screwdrivers, whether dedicated or multi.

-
I never tried using a ViseGrip as a quarter inch bit handle. It works fine. Also equally good when the bit is turned 90 degrees to the jaws. Lots of torque that way. Thanks for the tip. The Craftsman model that I have is the only one small enough to actually pocket carry. It seems to be as good as the original name brand tools. Might have been made in the same factory. Who knows?
Best wishes. G

-
Day 2
In the interests of science, I decided to put my bottle opening doohickey to the test:

The bottle opener bit is the "Bot-L-Bit", made by Tec Accessories. I recalled from prior use that it is about half good, and the same was found this evening. It will take the cap off a beer, but it takes two goes. The first time bends the cap but not quite enough, you then have to move it round a little and go again. It gets the job done, but I don't like the way it does it.
Two days in and a theme seems to be emerging, when it comes to prying and opening what I am carrying is not as good as if I had my usual SAK. Back to the drawing board. I think I may need to carry a dedicated bottle opener and a little pry bar.
The other thing that is becoming apparent is that I am not going to carry this pouch for a month. It is too large and heavy, and keeps trying to pull my trousers down. I am literally wearing my belt too tight to counteract this. I have no idea how guys who walk around with a 8" fixed blade and a Supertool 300 on their belt can manage that comfortably.
I can do one of two things here. Carry fewer / lighter items, or separate them into two pouches and spread the load. We are in the colder months now, and I am usually wearing a fleece with pockets or a cardigan around the house, let alone outdoors. So I could have some of the carry in there and the rest in my trouser pocket. I will try that, and if it doesn't work out will look at reducing the overall carry.
-
Day 2
I was in the office all day and didn't use any tools. So I took the attached photo when I got home. The screwdriver is a cheap 6-in-1 I bought at Lowe's. I used to use Klein multibit screwdrivers, but I have ruined too many of those in the past by using them as a chisel. So I stick with the inexpensive screwdrivers nowdays

-
Day 2
Well, I expected this would be a tough challenge, but did not expect to fail on day 2.
I was awakened this morning to deal with an emergency. One of my daughters had gotten the drawstring of her pajama pants in a terrific knot, and tied tightly enough that she could not get the pants off.
Fingernails were making no progress whatsoever against this knot. I could have cut the drawstring, but I didn’t want to ruin it.
I have a handful of marlin spikes, but none that are standalone; all are attached to knives. So I grabbed my sharpest spike (Colonial Rigging Knife) and was able to work the knot loose with it. Disaster averted, but I had to use a MT.
I plan to continue with this challenge to the extent possible. Not worried about a badge; the experience, camaraderie, and banter are what make challenges fun for me.
Below is the Colonial Rigging Knife, along with my carry knife today, a Case Marilla.

-
I appreciate your honesty in the challenge. We have been on several challenges together and they have always been fun. I realize you are one of the members who doesn't pursue badges. You could already have a bunch more from the challenges you completed successfully.
You are completely welcome to keep posting or cheerleading or whatever capacity you choose. Our friend Powernoodle has been throwing in a few comments and photos already.
Best wishes.
Gary
:) -
@IMR4198 said:
That is some first class paracord work. Did you get any snow up your way? Just rain here. Let's see.... I think you have the first place in yummy hand axe.
We got a little snow recently, but fell short of the two to four inches that was prognosticated.@LoopCutter said:
Fresh snow as 5” or more of snow fell after dark for a few hours.I'm really glad my need to shovel snow is drastically reduced or eliminated!
@gra_farmer said:
This is my EDC wallet kit that I carry everywhere...I like the Fenix!

@fullbreakfast said:
I decided to put my bottle opening doohickey to the test...If you're desparate for a beer, that little jobby is definitely better than sobriety...
@Adam5 said:
I used to use Klein multibit screwdrivers, but I have ruined too many of those in the past by using them as a chisel.A chisel is one of those things I rarely have a need for. The chisel in the back layer of SAKs usually suffices for me.
Great work today, y'awl!

Day 2
A micro knife with a Micro Machine.
[attach id=0 msg=2554728]
This is probably gonna be a knife-heavy challenge for me.

-
I used to have a friend named Hildegard. I don't think she spelled her name with the double a's. She had been a high fashion photographer in post-war Germany. She also wrote several books. When I knew her, she was caregiver for a rather well-known artist who lived with her.
Hildegard was high-handed with everyone. Consequently, everyone hated her for her loud, arrogant manner. She was good as gold to me. I had an 'in' with her. I was friends with Helena. Helena was another German lady about the same age.
Hildegard was from Bremen and worked in Stuttgart and Berlin. Helena was from Hohenelbe near the Giant Mountains (Riesengebirge). Borders change. Sometimes the town was Hohenelbe, and sometimes it was Vrchlabi.
Hildegard and Helena were tight with each other. Helena's husband hated her friend with a passion. Hildegard wouldn't even say his name. She called him 'that little man'.
I saw Hildegard at the grocery store one day. I asked if she had been to see Helena. She said, 'NO, I can't stand that little man.' I told her that Jim had died months before and Helena just hadn't told anyone. I didn't like bringing her grief, but assumed she knew already. To tell the truth, I never liked the little man either. They are all gone now anyway. -
Day 2:
The Bambu A1 arrived just a few minutes before midnight last night, and I drove to the gate and got it. I set it up today.
Gotta admit, it does produce far better results with less work than my old AD5M. I really didn't need the AMS Lite, but at $100 more vs. $250 more for the standalone system outside of Black Friday pricing--it was a no-brainer. It's also far easier to use.
To add, the filament I'm using is 3 months old, has not been stored in a drybox, and it still prints well (I did dry it overnight on the S1 dryer, however).
Tomorrow, while I'm getting some power strips and shelving units to help finish the basement job, I'm checking out Hobby Lobby's filament assortment. Normally, I buy SUNLU off Amazon. It's cheap stuff that just works well.
[attach id=0 msg=2554730]

-
The Bambu A1 arrived just a few minutes before midnight last night, and I drove to the gate and got it. I set it up today.
Gotta admit, it does produce far better results with less work than my old AD5M. I really didn't need the AMS Lite, but at $100 more vs. $250 more for the standalone system outside of Black Friday pricing--it was a no-brainer. It's also far easier to use.
To add, the filament I'm using is 3 months old, has not been stored in a drybox, and it still prints well (I did dry it overnight on the S1 dryer, however).
Tomorrow, while I'm getting some power strips and shelving units to help finish the basement job, I'm checking out Hobby Lobby's filament assortment. Normally, I buy SUNLU off Amazon. It's cheap stuff that just works well.
[attach id=0 msg=2554730]
I like that little Stanley utility knife. I have one of those too, but mine is black.
I also have a couple of 3D printers, but haven't used them in awhile. I need to get back to it. -
@IMR4198 said:
MINI CHALLENGE DEC 5Participants will be required to make their daily post consisting of three EDC items that are the same color. You pick the color. Items don't have to be tools. They could be any sort of EDC item, such as keys, phone, bandanas, pouches, lighters, etc. As long as there are no multis and they are all the same color. Three or more.This should be fun. Having just done the red gear challenge, and with the blackout challenge coming up next month, I feel like picking a different colour to keep things interesting. Thinking cap on.
-
@gra_farmer said:
And a look at the ring-turn knife[](https://postimg.cc/7bQJz1
ps://i.postimg.cc/NfQ6WbPk/IMG20251202185724.jpg[/img)Really intriguing little knife. I’ve not seen one like that before.
-
@IMR4198 said:
I used to have a friend named Hildegard. I don't think she spelled her name with the double a's. She had been a high fashion photographer in post-war Germany. She also wrote several books. When I knew her, she was caregiver for a rather well-known artist who lived with her.
Hildegard was high-handed with everyone. Consequently, everyone hated her for her loud, arrogant manner. She was good as gold to me. I had an 'in' with her. I was friends with Helena. Helena was another German lady about the same age.
Hildegard was from Bremen and worked in Stuttgart and Berlin. Helena was from Hohenelbe near the Giant Mountains (Riesengebirge). Borders change. Sometimes the town was Hohenelbe, and sometimes it was Vrchlabi.
Hildegard and Helena were tight with each other. Helena's husband hated her friend with a passion. Hildegard wouldn't even say his name. She called him 'that little man'.
I saw Hildegard at the grocery store one day. I asked if she had been to see Helena. She said, 'NO, I can't stand that little man.' I told her that Jim had died months before and Helena just hadn't told anyone. I didn't like bringing her grief, but assumed she knew already. To tell the truth, I never liked the little man either. They are all gone now anyway.We used to have a neighbour who was an Austrian lady, who also had a certain amount of character, and you would not want to be on the wrong side of her. She preferred to be known as Simone, though that was not her name. We were friends with her, then she didn’t speak to us for eight years, then we became friends with her again. She despised much of humanity, but compensated for this by her love of dogs.
Considering that her idea of a healthy breakfast is a cigarette and a glass of white wine, perhaps surprisingly she remains on this Earth - fit and healthy at seventy-something, as of the last time we heard from her. That was a few weeks ago.
-
.
-
Day 3

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login


