December 2025 Tool Box Challenge
-
Day 3
I have dropped the black pouch in favour of a slightly smaller blue one, and transferred much of the weight to a separate grey pouch that is intended to be carried in the pocket of a fleece, cardigan or coat:

I know the size of the blue pouch is OK for my jeans pocket, as I carried this specific pouch that way daily for about two years. I've transferred all of the screwdriving equipment to the grey pouch. But it is typical of my sick mind that I couldn't resist adding something when I took something away, so I have put a small pry bar into the blue pouch.
The contents of the grey pouch, plus the pry bar:

I have changed the bit loadout as well, again adding rather than subtracting weight

I recently got hold of some long-necked 1/4" bits, with a view to being able to access recessed screws with a bit driver:

I'm now using two rubber bit racks back to back to hold three long-neck bits (small slotted, PH0, PH2) and six regular bits (large slotted, PH2, PZ2, H4, H5, H6):

In the 4mm bit adapter is a cylindrical "bit" that actually houses a fairly strong magnet:

Potentially useful for retrieval. I probably won't use it much, if at all, but it's a nice thing to have around.
The Bot-L-Bit has been banished as not good enough at its job, leaving me currently without a bottle opener. Funnily enough I don’t own a dedicated bottle opener, which being a SAK man I’ve never needed. I don’t open bottles very often, but it feels wrong not to be able to. So I think I might buy one.
-
@LoopCutter said:
Actually it is the BUCK 303, a smaller version of the BUCK 301.It is very functional and disappears in the pocket.
My ignorance of the world of American traditional folding knives is almost complete. I only own one. Perhaps I should get a couple more in the interests of expanding my knowledge

-
@fullbreakfast said:
I feel like picking a different colour to keep things interesting.There are two colors I could go with. I'll wait and see what everyone else posts.
@gra_farmer said:
Some pictures of the ring turn to wet your curiosity...That thing is thin! Reminds me that I have a beat-to-smurf Rodgers knife I could show.
@WECSOG said:
Bonus item: NAA Companion "Earl" .22 black powder cap and ball revolver.
@IMR4198 said:
I toddled to W-Mart and back. Decided to carry an Opinel.Always a good choice! I like the Toyota Tacoma in the background, too.
@nate j said:
For my money, Vic scissors are the best in the business.
The Companion X would match well with a 111mm, many of which do not have scissors.Great work today, y'awl!
Day 3
Here's a yellow Delrin/CV Case. Perhaps obviously, it's a Sod Buster Jr. (pattern 3137).
[attach id=0 msg=2554827]

-
@fullbreakfast said:
My ignorance of the world of American traditional folding knives is almost complete. I only own one. Perhaps I should get a couple more in the interests of expanding my knowledge
No harm, I like the BUCK STOCKMAN for carry
Over the Case varieties.Case offers man different patterns and even more and more scale variants.
The CASE model 75 (largest) and the model 47 (3-7/8”) are my preferred models of those CASE midges.FYI - BUCK only makes the model 301 and 303 in the USA.
The same patterns made overseas are numbered 371 and 373. In fact any BUCK slipjoints with 37x or 38x model numbers are made in Asia.
-
Day 3:
I had a cheap particle wood bookcase I moved temporarily. The thing was so wobbly the thin cardstock back fell off. Instead of throwing it out, I 3D printed a few right angle brackets and screwed them in with some set of self-tapping wood screws I bought at Harbor Freight for another project.
I installed them with my fanciest screwdriver--a Mac PH2 I bought off the truck while getting the car serviced about a year ago. The tip fit is pretty good. However--I like the Williams/Caterpillar screwdrivers best--a beefier handle, same as Snap-On, and only around $10-ish.
From then on out--I learned to try to avoid syncing service appointments with the tool guy's rounds. Or not--especially given Snap-On has obscene shipping.
[attach id=0 msg=2554831]

-
:-[
Sorry I'm late!
Day 1:
Carried a liner-lock flipper that I won here at MTO.

-
Day 2:
I wanted to secure my tailgate using a hose clamp. I used a big Husky brand slotted driver that I have owned for almost 20 years.
I wasn't carrying it around throughout the day because it is huge. but this is exactly the kind of thing I would have normally used a leatherman for.


-
Day 3:
I finally found a picture to hang above my fireplace and it arrived in the mail. I was carrying a different blade throughout the day but at home I reached for my new Gerber EAB to open this large package.
worked great. picture looked great.

-
Sorry I'm late folks. It's been a busy week since we got back from my outlaws for Thanksgiving. Time to catch up.
<u>Day 1 - catchup</u>
I gifted myself an Opinel No9 and an accompanying case for my birthday. This will be my load out for at least the next few days with the high possibility of swapping knives in and out. Got to use the No9 to open a new desk chair. My backside will really appreciate it.
-
-
-
Day 4
The Sanrenmu 6040 is my favorite tiny knife. Amazing build quality and tiny little blade for $6.

-
MINI CHALLENGE TOMORROW
Day 4
Just a reminder. Get your entries together. Follow the rules for your post tomorrow. I have already tagged the next man up for the second mini challenge. It is up to him to provide the rules for his version of the mini challenge and then pass the baton to someone else. Look for his requirements some time next week. No, I don't know what they are either, nor do I know who he will ask.
This is today's carry. Ruff Rida, Gerber flash, and a stubby driver. The driver is a Credo. I must have had some more of these at one time. The color and type handle seem very familiar for some reason. I need to clean up some more screwdrivers out of my screwdriver box. I started to buy a can of WD40 at W-Mart but saw I would have to make installment payments on one. I will use some kerosene to clean them up instead. If I ever get around to that.
Best wishes. G
[attach id=0 msg=2554863]
-
Day 4
Today, first thing this morning retrieving a fork from the silverware drawer I noticed the pull was loose.
So, I quickly pressed my thumb on the screw inside the drawer and spun the pull. It was not just loose, it was almost unthreaded 🙄
After my breakfast I retrieved my bit kit from my house tool kit, assembled a #2 Phillips into the rachett and tightened the pull snuggly into place. Stretching my head afterwards thinking I did this last month, I am sure.
[attach id=0 msg=2554879]
Double checked my work, yep it is definitely tight. Checked the drawer over, my cooking utensils and can opener, whisks, spatulas and this pill was very loose as well. Added the extension and went to work. Several turns, this was now tight. OK, moved to left side of stove/oven. Checked to TOWEL / Hot pads drawer, “loose as well”
the next drawer with cling wrap, cooking foil, wax paper, parchment paper, loose as well. Across the kitchen my junk drawer, actually now keys and wallet hide away, and this was noticeably loose. So of 5 drawers all five needed significant tightening.Darn thing is I know the junk drawer was tight Sunday, I did use a screw driver on it.
Maybe gremlins! Loosened awl the drawers! Nah yo cold, maybe temperature change?
So weird.
This kit works well getting into tight spots, saved me from emptying each drawer.
Had used last week to replace a tail light bulb on my truck. Used a TORX bit.

-
Day 4
Case Marilla on package duty…

-
Loose drawer pulls that you know were tight before? Hmmm? Are you missing some small things, too? Maybe a sock here and there? Check to see if there are some slimy giant demon toad footprints. Or maybe some smaller footprints like an old lady who likes country line dancing and getting her leaves blown for free might leave. Maybe not the last one. Definitely look for toad prints.
It looks like a couple more contestants have straggled in. Covered in mud from playing tag on a muddy playground. We will see if they have been paying attention tomorrow when 'you know what day' rolls around.
We will see....
Best wishes. G

-
A TOAD.

WELL! When I questioned his where about he never blinked.
[attach id=0 msg=2554890]
Don’t think he has any knowledge! He normally guards the knife corner and has extra duties keeping me from any MTS in that area too!
Pretty content in his assigned spot.I will have to sneak up and check if the gnome is up to any shenanigans. The Shelf ELF moved on BLACK FRIDAY to his assigned station to be mischievous at my grand-daughter’s. I think he was planning to harass the older sister as she made some statement about being to old to beli…
OH, maybe the FROG, he does not like snow!
But, then some tools are by the Tiger and Bears.

-
The Gnome
[attach id=0 msg=2554893]
Says he has been checking travel destinations to get me to warmer climates in January and or February at the best price.The FROG
[attach id=1 msg=2554893]
Is just happy he is inside,”what is a draw pull?” I think WS his reply.And, this group,
[attach id=2 msg=2554893]
“What day is today?” “Hey why ya bothering us, we just chillin’”


-
I was in a warmer destination last night. I threw my Coleman sleeping bag on top of the bed covers. I heard something banging around outside last night. Might have been a raccoon doing gymnastics. If my trail camera had batteries in it, I would know for sure. The Ingles stores put batteries on sale every holiday season. I need to stock up.
Best wishes. G

-
Day 4
I just realized that the leather pouch I had been carrying my Swisschamp in, is the perfect size for my Visegrips. The pouch is some kind of military or police surplus; French I think.
The knife of the day is a Boker Tree Brand, sodbuster pattern with a lockback, in D2 steel.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




