December 2025 Tool Box Challenge
-
MINI CHALLENGE TOMORROW
Day 4
Just a reminder. Get your entries together. Follow the rules for your post tomorrow. I have already tagged the next man up for the second mini challenge. It is up to him to provide the rules for his version of the mini challenge and then pass the baton to someone else. Look for his requirements some time next week. No, I don't know what they are either, nor do I know who he will ask.
This is today's carry. Ruff Rida, Gerber flash, and a stubby driver. The driver is a Credo. I must have had some more of these at one time. The color and type handle seem very familiar for some reason. I need to clean up some more screwdrivers out of my screwdriver box. I started to buy a can of WD40 at W-Mart but saw I would have to make installment payments on one. I will use some kerosene to clean them up instead. If I ever get around to that.
Best wishes. G
[attach id=0 msg=2554863]
-
Day 4
Today, first thing this morning retrieving a fork from the silverware drawer I noticed the pull was loose.
So, I quickly pressed my thumb on the screw inside the drawer and spun the pull. It was not just loose, it was almost unthreaded 🙄
After my breakfast I retrieved my bit kit from my house tool kit, assembled a #2 Phillips into the rachett and tightened the pull snuggly into place. Stretching my head afterwards thinking I did this last month, I am sure.
[attach id=0 msg=2554879]
Double checked my work, yep it is definitely tight. Checked the drawer over, my cooking utensils and can opener, whisks, spatulas and this pill was very loose as well. Added the extension and went to work. Several turns, this was now tight. OK, moved to left side of stove/oven. Checked to TOWEL / Hot pads drawer, “loose as well”
the next drawer with cling wrap, cooking foil, wax paper, parchment paper, loose as well. Across the kitchen my junk drawer, actually now keys and wallet hide away, and this was noticeably loose. So of 5 drawers all five needed significant tightening.Darn thing is I know the junk drawer was tight Sunday, I did use a screw driver on it.
Maybe gremlins! Loosened awl the drawers! Nah yo cold, maybe temperature change?
So weird.
This kit works well getting into tight spots, saved me from emptying each drawer.
Had used last week to replace a tail light bulb on my truck. Used a TORX bit.

-
Day 4
Case Marilla on package duty…

-
Loose drawer pulls that you know were tight before? Hmmm? Are you missing some small things, too? Maybe a sock here and there? Check to see if there are some slimy giant demon toad footprints. Or maybe some smaller footprints like an old lady who likes country line dancing and getting her leaves blown for free might leave. Maybe not the last one. Definitely look for toad prints.
It looks like a couple more contestants have straggled in. Covered in mud from playing tag on a muddy playground. We will see if they have been paying attention tomorrow when 'you know what day' rolls around.
We will see....
Best wishes. G

-
A TOAD.

WELL! When I questioned his where about he never blinked.
[attach id=0 msg=2554890]
Don’t think he has any knowledge! He normally guards the knife corner and has extra duties keeping me from any MTS in that area too!
Pretty content in his assigned spot.I will have to sneak up and check if the gnome is up to any shenanigans. The Shelf ELF moved on BLACK FRIDAY to his assigned station to be mischievous at my grand-daughter’s. I think he was planning to harass the older sister as she made some statement about being to old to beli…
OH, maybe the FROG, he does not like snow!
But, then some tools are by the Tiger and Bears.

-
The Gnome
[attach id=0 msg=2554893]
Says he has been checking travel destinations to get me to warmer climates in January and or February at the best price.The FROG
[attach id=1 msg=2554893]
Is just happy he is inside,”what is a draw pull?” I think WS his reply.And, this group,
[attach id=2 msg=2554893]
“What day is today?” “Hey why ya bothering us, we just chillin’”


-
I was in a warmer destination last night. I threw my Coleman sleeping bag on top of the bed covers. I heard something banging around outside last night. Might have been a raccoon doing gymnastics. If my trail camera had batteries in it, I would know for sure. The Ingles stores put batteries on sale every holiday season. I need to stock up.
Best wishes. G

-
Day 4
I just realized that the leather pouch I had been carrying my Swisschamp in, is the perfect size for my Visegrips. The pouch is some kind of military or police surplus; French I think.
The knife of the day is a Boker Tree Brand, sodbuster pattern with a lockback, in D2 steel.

-
Nice knife, WECSOG

I don't own a Rangebuster. Yet. :D
-
Day 4
I used my 5" Knipex Cobra to tighten the set screw of a ground clamp:

-
DAY 4
The humble draper electric shears were used today at a bottle water station I was manning...
Just to give you an idea of the setup
I shifted around 8 or 10 pallets each with 600 litres of bottled water into cars throughout a 10 hours shift....long day but helped people get water as it's out.
The negative aspect for me is that reporters / news crew were there.... I'll be on GB news I am sure!
-
That looks like some sort of emergency relief station. What happened to cause the need for it? Best wishes. G

-
Day 4

One of the things I am carrying in my pouch, mostly because I can’t have my Swiss Card, is this capsule containing various useful items. I put this together as a fun exercise in seeing what was the smallest assemblage I could make that could legitimately be called a toolkit, and would offer some genuine usefulness. I had this capsule spare, which I had used to carry medication for my daughter that happily she no longer needs. So I used it.
Contents:

Maratac titanium pick
Victorinox pen (with the plastic head cut off to fit in)
Vic toothpick and tweezers
Tortoise Gear Firefly (mini ferro rod)
Large and small needles
Leatherman eyeglass screwdriverI would not use the Maratac pick on my teeth. It’s much harder than tooth enamel, I think you would be mad to do that. But I find they have several uses. Ejecting SIM cards, probing and cleaning in tight spaces, etc. Most recently I used it to unpick a very tight knot in some elastic string on a tie my son has to wear to school. A normal marlin spike would have been too big to get into this small hard knot.
The ferro rod can be struck quite effectively with the diagonal edge of the utility blade I carry. My day to day need for this is nil. It’s just included because I had the space and I thought it was cool.
The reason for carrying two needles is to have the larger one for thicker and tougher material and the smaller one for more dainty work. They are big eye needles and the larger one will not go through the holes in a shirt button, for example.
-
I'll keep that in mind, and maybe forget about ordering one of their Gerber MPs.
@King_Gorilla said:
I reached for my new Gerber EAB to open this large package.That OD green sure looks good!
@AzteCypher said:
I gifted myself an Opinel No9 and an accompanying case for my birthday.Good choice!

@fullbreakfast said:
One of the things I am carrying in my pouch, mostly because I can’t have my Swiss Card, is this capsule containing various useful items.Good idea!
@gra_farmer said:
No water.....whole town (very big town)I have a bad feeling that my water will be shut off temporarily...something about fixing the water main. :ahhh :ahhh :ahhh
Another great day, y'awl!
Day 4
Today I did a little work with paracord. Since I was testing tools, I used cord that I find less than attractive. Here I'm measuring out the last of a roughly two-foot length.
[attach id=0 msg=2554989]
A machinist's rule (sometimes called a machinist's scale) has proven very handy over the years.
[attach id=1 msg=2554989]
.jpg)
.jpg)
-
Day 5
Atka Cube, NiteIze carabiner, Harnds Castor.

-
A machinist's rule (sometimes called a machinist's scale) has proven very handy over the years.
The clip is a useful feature!
-
@Farmer X said:
I'll keep that in mind, and maybe forget about ordering one of their Gerber MPs.
That OD green sure looks good!
Good choice!
Good idea!
I have a bad feeling that my water will be shut off temporarily...something about fixing the water main. :ahhh :ahhh :ahhhAnother great day, y'awl!
Day 4
Today I did a little work with paracord. Since I was testing tools, I used cord that I find less than attractive. Here I'm measuring out the last of a roughly two-foot length.
[attach id=0 msg=2554989]
A machinist's rule (sometimes called a machinist's scale) has proven very handy over the years.
[attach id=1 msg=2554989]
Probably one of my favorite rules, alongside a Shinwa in Metric. I also have some PECs with various increments.
I've got three--Granddad gave me two, then I bought the third at an antique store. They do most of my small measuring tasks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

