December 2025 Tool Box Challenge
-
Day 6
[attach id=0 msg=2555162]

-
Day 6

The pry bar doing important work here, helping me winkle a button battery out of its hiding place.
-
Thanks to all who participated in the (mostly Orange?) mini-challenge. Be on the lookout for the next one which will be held on Dec 12. The requirements will be posted next week. Hats off to all participants.
I'm having some connection problems with MTo today, so I posted a photo earlier and left it at that. You can see my paracord safety device on the Svord. So far, my most used tool in the Toolbox Challenge has been the flashlight followed by the nail file. I mentioned that one of my flashlights was lost (eaten?). Still haven't found it. I wonder if Hildegaard 'borrowed' it?
I still need to check my battery supplier (grocer). They usually mark good grade alkaline batteries down from $3.82 a pack to $1.50. Formerly good anyway. The last AAs didn't last long on trail camera duty, and the Cs in my radio pooped out and leaked. Thank you Rayovac. You now make crap batteries like everyone else. The alternative is the bottom feeder grade junk from Dollar-Tree. Remember the old 'cat' batteries that we used to buy? You could put new ones in your nickel-plated flashlight that took two Ds and had a snap out belt loop and a button you could use to send light signals with? New ones would give a dim light for a few days and then you would need to strike a match to see if they were working at all after that.
Best wishes. G

-
Day 6
I was able to use the edge/corner of the P-51 in lieu of a screwdriver or coin to change the batteries in this toy for one of my daughters.
It wasn’t ideal, mostly due to being uncomfortable to hold, but it did get the job done.

-
Day 6
My tool grip for many work tasks include these pliers and at least 1 6n1 husky driver. These are laying on my Kobalt clipboard work case along with a RR Wharncliff WORK KNIFE (that is what they call it) RR2181.
[attach id=0 msg=2555177]
And, how the tools ride from job to job in a tool bag,
[attach id=1 msg=2555177]

-
-
DAY 6
Have taken the wife to a posh hotel, for a meal out and a luxurious night away from the babies, and tomorrow to see the famous River Dance.....had to book 18 months ago to get tickets.
So limited on kit to bring with me, this are what I carry in hotels and away from normal places
It's a nice hotel room, cost roughly $400 for the night...it does include breakfast

Meal out is estimated at $250
Parking $85
Tickets to show $350
Extras...... running out of money!!!
It's painful when you start to add things up, but my wife really is amazing and worth every penny :D
-
@IMR4198 said:
When I was in high school, the FFA boys all carried a sodbuster type. One of the teachers sold Brown Mule soddies to the guys. They were very inexpensive and good solid using knives.
For anyone who doesn't know what FFA is, it stands for Future Farmers of America. Everyone bought a blue jacket with a big gold FFA seal on the back and your name on the front. Agriculture training. Except for two girls, it was an all male thing. The blue jackets were worn every day just like some kind of gang colors.
I think I only had one soddie. It was a black CASE Sodbuster Jr. I didn't have it very long. Swapped it for something.
I think everyone checked in with their color-coded challenge items. Might be one or two more later on. Best wishes. G

My FFA leader/shop class teacher carried a Case soddy and a Browning Hi Power. We sold cases of Navel oranges just before Christmas as a fundraiser. And, our first project in shop class was a rifle rack. We also had a Christmas party at the teacher's home every year, where we ate the best grilled steaks imaginable.
The teacher was a WWII vet who fought in the Battle of the Bulge, and he used to regale us with war stories during class. We all had immense respect for him. -
Day 6
My Knipex pliers are about 7" long, which gives them more leverage than the smaller ones but not great for EDC. Great for motorcycle carry, though.
Next is my Reylight copper pineapple flashlight, and my Boker Rangebuster.
-

@Adam5 said:
After a little research, I discovered that it would be cheaper to replace the rear passenger side window than to call a locksmith. So, I turned to the tool everybody uses to bust out a window...That is not the way it should be. But at least the pipe bender got the job done.
@IMR4198 said:
Thank you Rayovac. You now make crap batteries like everyone else. The alternative is the bottom feeder grade junk from Dollar-Tree.Oddly enough, I've had good luck with Great Value brand alkaline cells. The Dollar Tree stuff is okay for TV remotes, but for any other use, I'd trust them about half as far as I could throw them. Better to stick with Duracell or Energizer.
@LoopCutter said:
These are laying on my Kobalt clipboard work case along with a RR Wharncliff WORK KNIFE (that is what they call it) RR2181.I'm gonna cruise over to SMKW and see if that work knife is available. I like a swayback. And you seem to be in pretty good shape for the next mini challenge!

@WECSOG said:
The teacher was a WWII vet who fought in the Battle of the Bulge, and he used to regale us with war stories during class. We all had immense respect for him.As do I.

Another great day, y'awl!
Day 6
After a slight detour for the first mini challenge, I'm getting back to things in my paracord tools box.
[attach id=0 msg=2555205]
That blade took several passes to get through the paracord. A new one didn't help much. Since I have another paracord project in the works, it's a good thing it at least had some capability.
[attach id=1 msg=2555205]
The handle is marked "Excel USA." I've used these blades on and off for much of my life, and I even have a scar on my thumb after one bit me. That was a case of flagrant misuse.
[attach id=2 msg=2555205]
.jpg)
.jpg)
.jpg)
-
I had a weird funky dream last night about myself and one of the challenge members. That's weird since I don't really know anybody personally. It was so intense and lasted so long, I figured I would tell it. Then when I woke up for the last time and my feet touched the floor it tripped my reset button and I forgot the whole mess.
I remember who it was about. That's about it. I also remembered something that I'm not sure I dreamed or if it was something I saw here. I thought I saw a TL-29 of some sort in this dream, or whatever it was. Just to be clear about it, the TL-29 is considered a multi-tool and strictly a no-no.
Back out of dreamville and into harsh reality. I shouldn't have wondered if anyone would think I was making the FFA business up. I do tell so many fibrications on here. I wonder if our friend WECSOG still has his old Ag jacket? There were a set of iron stakes behind the shop and a set of iron horseshoes. You were liable to hear the clangs almost any time of day. I might have to find some photos of the operation.
Best wishes,
G

-
Day 6
Being deprived of the quintessential multitool implement, the bottle opener, I turned to the Knipex to liberate the cap from a bottle of beer:

-
Day 6:
Cleanup on some 3D prints with the Stanley England 10-598
I really need to go on Amazon and get a knife that takes scalpel blades. I prefer this one to utility knives due to the ergonomics, but blades are $5 each (thus I sharpen them) at the feed store (only one carrying either the 10-049 or 10-598). I think this one (unlike its American cousin) can take Swann-Martin marking knife blades, which are a little cheaper.
[attach id=0 msg=2555232]
I did the hydraulic spreader's parts via AMS on one plate instead of multiple plates with different colors (partly why I didn't do it when I had the Adventurer 5M--no multicolor system) since it could just print overnight and I'd assemble it in the morning instead of having to set up and wait for plate after plate to cool.
Yep, that's a lot of waste in the bin...It was actually overflowing....
[attach id=1 msg=2555232]


-
Great work awl, looks like a fun challenge, I’d have been in but travelling overseas for Christmas so would have missed 10 days
Here’s a few OPT’s in my collection

-
<u>Day 6</u>
Finally had time to use the Opinel No 9 to cut into the GAW Surprise Box to see what goodies lie within.
-
Day 7

-
Day 5:
I keep these in my bathroom for removing unwanted hairs that grow from my ears.

-
Day 6:
I felt fancy.

-
@IMR4198 said:
I had a weird funky dream last night about myself and one of the challenge members. That's weird since I don't really know anybody personally. It was so intense and lasted so long, I figured I would tell it. Then when I woke up for the last time and my feet touched the floor it tripped my reset button and I forgot the whole mess.
I remember who it was about. That's about it. I also remembered something that I'm not sure I dreamed or if it was something I saw here. I thought I saw a TL-29 of some sort in this dream, or whatever it was. Just to be clear about it, the TL-29 is considered a multi-tool and strictly a no-no.
Back out of dreamville and into harsh reality. I shouldn't have wondered if anyone would think I was making the FFA business up. I do tell so many fibrications on here. I wonder if our friend WECSOG still has his old Ag jacket? There were a set of iron stakes behind the shop and a set of iron horseshoes. You were liable to hear the clangs almost any time of day. I might have to find some photos of the operation.
Best wishes,
G

I had a weird tool-related dream too. I was in a place near my home, but it was a combination of a couple of places, and it was like a pool drained of all water (no water there in real life), and at the bottom were ratchets and stationary, and I was sorting through them, organising them in rows,seeing what I'd keep and what was junk, testing to see if the ratchets and staplers worked, etc. And then I woke up and lost everything.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



