December 2025 Tool Box Challenge
-
Day 11
I keep a whistle on my keychain. It comes in handy for coaching youth sports, and is also a safety & signaling item for hiking.
The Fox 40 Classic is loud, lightweight, and fairly robust.

-
Day 11

-
Day 9
My Pock-itz XL on the back of my new company work van:

-
Day 10
I used my Knipex pliers in my garage this evening:

-
@cody6268 said:
Put the finishing touches on this after printing the last part for it.Cool tractor...but my eye went immediately to the Nissan Pathfinder in the background. Those first-generation Pathfinders have all but disappeared.
@IMR4198 said:
I kept the OT out of the SOS surprise box because it was cute. It doesn't have to flaunt it's HUGE size.That Schrade carbon steel takes a great edge, too. I gave the sheepsfoot blade on a 108OT several whacks across a strop and improved it massively. Said 108OT may even be the one in your photo.
@fullbreakfast said:
I have posted my EDC in the thread a couple of times but I didn’t include my watch.
@Adam5 said:
I used my Knipex pliers in my garage this evening:Someday I'll add some Knipex to my horde (or is that hoard?).
Day 11
Today's tool is the Fenix HM50R V2.0. Here it's suspended in an attempt to charge the Kaito SB-1059's photocell. Suffice it to say that was a miserable failure.
[attach id=0 msg=2555780]
[attach id=1 msg=2555780]
.jpg)
.jpg)
-
Day 11
Long day out of the house.
Packed these two![attach id=0 msg=2555783]
And, after an entire out, appointments, travel, another appointment and more travel
Still no use. But, every time I tapped my pocket the knife was there, and a backside check my pliers there as well.

-
Day 11, broke down a few boxes, swapped between whatever knife was already laying where I worked.
Finally, I ended up with my Civivi Baby Banter. Surprisingly well done for $50.
[attach id=0 msg=2555787]

-
-
Day 10:

-
Day 11:

-
@AzteCypher said:
<u>Day 10</u>Used the stubby to setup a knife for some sharpening.
How is the stubby for pocket use? I have the Dash 7 all over the place (and it's not too bad for pocket carry--and it also doubles as a bit holder for drills/impacts) as well as the Teeny Turner which mostly just gets used for pocket clips.
Noticed they have a new one called "The Pic"--only carries 3 bits, but is designed to be flat specifically for pocket carry.
So far, I've noticed only Subaru carries it in the States. It's apparently mostly a promo products item. The stock bits are 2-inch PH1, PH2, and 3/16 slotted (though there is a version that replaces the 3/16 with PH3).
-
I messed up my Day sequencing in my previous posts ::),sorry admins
Day 5
I have a sweet tooth (who doesn't?),here the Mundial helped get to the yummy gummies
[attach id=0 msg=2555796]Day 6
1 of the knives I'm using in this challenge is the Solo,and 1 of my wrench solutions is this 4in shifting.
I also added this mini pry.
[attach id=1 msg=2555796]

-
Day 12
A well-used tool, my Fiskars folding scissors. Still cut excellently. And so inexpensive. An amazing little tool.

-
Day 12
2nd mini challenge dayThe old Boker 4 blade congress was given to me by my old Uncle Rob. He said it belonged to my grandfather, but I don't know. Rob was born in 1918 and lived to be 96. He still drove until he was 94 and rear ended a car at a stop light. He went to court over it and the judge asked if he was going to get his license renewed again. Rob said of course. The judge asked, "What are you going to do, Rob? Drive until you are a hundred?" Rob didn't have an answer to that one and the judge asked him to turn over his license. Carbon steel, what else? The newer congress is a Kissing Crane. I have owned it for ages, but never carried it. Not even a day. I think I will carry an Opinel today. I need to do some stuff if it warms up a little. Best wishes. G[attach id=0 msg=2555805]

-
@cody6268 said:
How is the stubby for pocket use? I have the Dash 7 all over the place (and it's not too bad for pocket carry--and it also doubles as a bit holder for drills/impacts) as well as the Teeny Turner which mostly just gets used for pocket clips.Noticed they have a new one called "The Pic"--only carries 3 bits, but is designed to be flat specifically for pocket carry.
So far, I've noticed only Subaru carries it in the States. It's apparently mostly a promo products item. The stock bits are 2-inch PH1, PH2, and 3/16 slotted (though there is a version that replaces the 3/16 with PH3).
It carries better than expected as I can't feel it in my pockets. Even when I sit down I can't feel it in my pockets.
I wasn't aware of the The Pic. That would be perfect for pocket carry though. I wonder if it would carry well in a shirt pocket.
-
Day 12. + MINI CHALLENGE
[attach id=0 msg=2555820]
[attach id=1 msg=2555820]
The knife top is my maternal grandfather’s work knife assigned to him by the PAPER MILL, in Parchment, MI, now BROWN PAPER Co the last I recalled.
It is well used, and as I understood it was used to cutaway ragged edges before the large roll of paper was wrapped for shipment via railcar to printers.
I received in 1971 late that year after he past away. My cousin (older) received EDC pocket knife I remember he carried and used at home, on the farm and skinning Bullheads, we would catch on hot summer evenings.
I imagined it was a Wharncliff blade to start and is shaped most like a BARLOW.
Of course this carbon of some sort!
A picture of what can be read from the tang stamp is the second picture.
Like my grandfathers and my dad I have carried a pocket every day since the age of 8.
My first knife I bought myself was this SABRE Japan TRAPPER I snuck and bought in 1961 from a Surburban Drug Store, located in PARCHMENT, about 3 miles from my home in northern Kalamazoo County.
A farm kid needed his own knife paired with bailing twine , especially during heyday bailing season in JUNE.


-
Great old George Schrade, Looper. Best wishes. G

-
Day 12 Mini Challenge


When I was a small boy - this was in the 1970s - every summer we would go on holiday in North Yorkshire, staying in a village called Glaisdale, and spending time on the coast at places like Runswick Bay, Staithes, Sands End, Robin Hoods Bay and Whitby. The cliffs and rocks on the beaches in these places are fossiliferous, and me and my dad spent hours hunting for fossils. They were happy days. He bought this hammer for splitting promising rocks with. I guess it would be around fifty years old now.
My dad died nine years ago. The hammer has been in my shed, rusting, for much longer than that. I knew right away I would want it for this mini-challenge. And I started to think about my dad when I hunted it out. We hadn't been what you would call close - he was not close to anybody in that way - but I knew that he loved me and was proud of me, even though those were things it would not have occurred to him to say. I felt the same way about him. When I saw all the rust on the hammer it kind of hit me that I don't really have very much to remember him by - he did not care at all about physical possessions - and maybe the hammer is the only thing surviving that represents time we spent together. Apart from that all I have is some of his books.
I'm going to clean up the hammer, and it's not going to go back in the shed. I will probably post some more pictures here when I get done with it.


-
@fullbreakfast said:
Day 12 Mini Challenge

When I was a small boy - this was in the 1970s - every summer we would go on holiday in North Yorkshire, staying in a village called Glaisdale, and spending time on the coast at places like Runswick Bay, Staithes, Sands End, Robin Hoods Bay and Whitby. The cliffs and rocks on the beaches in these places are fossiliferous, and me and my dad spent hours hunting for fossils. They were happy days. He bought this hammer for splitting promising rocks with. I guess it would be around fifty years old now.
My dad died nine years ago. The hammer has been in my shed, rusting, for much longer than that. I knew right away I would want it for this mini-challenge. And I started to think about my dad when I hunted it out. We hadn't been what you would call close - he was not close to anybody in that way - but I knew that he loved me and was proud of me, even though those were things it would not have occurred to him to say. I felt the same way about him. When I saw all the rust on the hammer it kind of hit me that I don't really have very much to remember him by - he did not care at all about physical possessions - and maybe the hammer is the only thing surviving that represents time we spent together. Apart from that all I have is some of his books.
I'm going to clean up the hammer, and it's not going to go back in the shed. I will probably post some more pictures here when I get done with it.


🥲. Got something in my eye!
A great share fullbreakfast!

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
