December 2025 Tool Box Challenge
-
@LoopCutter said:
🥲. Got something in my eye!A great share fullbreakfast!


Yeah I got a little emotional as well.
-
Day 12 mini challenge
Top to bottom:
New Uncle Henry LB7
Old Uncle Henry LB7
Another old Uncle Henry LB7
Old, carbon steel Old Timer 7OT
Old carbon steel Boker Tree Brand CongressBoth of the old LB7s are USA made. One has a broken tip, but that doesn't diminish its usefulness. The 7OT is basically the Old Timer branded version of the Uncle Henry LB7. Most of them were Schrade+ stainless steel, but some were like this one, 1095 carbon steel. The LB7 was never made in carbon.
The Boker was passed down to me by my Dad. It's pretty beat up and tweaked from being run over by a truck. Still usable, though.
I thought about showing my old Winchester Model 12, 20 gauge shotgun but decided I didn't want to dig it out of the back of the safe. It is a pre-World War One gun from when the inscription said "Model 1912" instead of "Model 12," 20 gauge was the only gauge available (the 12 gauge version came out after WWI) and it has a 2-1/2" chamber instead of the modern 2-3/4". My grandfather's grandfather bought it new in about 1915, eventually passed it down to my grandfather. Then my grandfather gave it to my Dad for safekeeping, in exchange for a much newer shotgun so Grandad wouldn't be shotgun-less. About 30 years later, Dad passed it down to me. At some point he had it refinished. Wish he hadn't done that, but oh well. I pull it out and shoot it occasionally. If you reload like I do, making 2-1/2" shells is not difficult.

-
@ReamerPunch said:
A well-used tool, my Fiskars folding scissors.Handy little things, those!
@IMR4198 said:
The old Boker 4 blade congress was given to me by my old Uncle Rob.Your Uncle Rob sounds a little like my maternal grandfather, who was in his 90s when he was finally convinced that cleaning the gutters himself was no longer wise.
@LoopCutter said:
The knife top is my maternal grandfather’s work knife assigned to him by the PAPER MILL, in Parchment, MI, now BROWN PAPER Co the last I recalled.He definitely got a lot of good use out of that old wire jack!
@fullbreakfast said:
The cliffs and rocks on the beaches in these places are fossiliferous...Great story...and in the course of over 47 years, I think that's the first time I've heard the word "fossiliferous."
@WECSOG said:
The Boker was passed down to me by my Dad. It's pretty beat up and tweaked from being run over by a truck.Damn. I have to wonder if that's how it lost its shield.
Y'awl really stepped up for the mini challenge!

Day 12
While I don't have any family heirlooms to show, I can show a well-used carbon steel knife alongside its safe queen counterpart. The Opinel No. 8 at the top developed its patina mostly through use in the kitchen and dining room. It looks even better in sunlight or under the glare of my fluorescent kitchen light.
[attach id=0 msg=2555850]

-
Day 12
Mini challenge
This bayonet (with original scabbard) is the oldest piece in my collection, and was carried by my great grandfather in WWI.
I do not have the rifle, as it went to a different branch of the family.
I don’t carry or use it, for a number of obvious reasons. I’m not an expert, but I think it is in pretty good shape given it’s age and the fact that it was carried in the war.

-
Day 11
Busy week for me. I'll try to catch up on reading and responding to posts this weekend.
My Gerber EAB has seen some use this week:

-
@ReamerPunch said:
Day 12A well-used tool, my Fiskars folding scissors. Still cut excellently. And so inexpensive. An amazing little tool.
I have a lavender-colored pair I got a couple years back at Hobby Lobby. For their size and weight, they cut really well. I'd argue they can even outperform most multitool scissors.
-
Day 12:
Most used tools--X-Acto and sandpaper today cleaning up 3D prints.
Finished up a truck I was working on, made some new scales for a battered Tinker, and tested a whistle (worked surprisingly well).
One thing I do like is how these print with a textured bed--it results in a texture a bit more aggressive than Economy nylon scales.
[attach id=0 msg=2555864]
One thing I'm curious about in the long-term is how 3D printed scales hold up. Apparently, cellulose acetate (Cellidor) is slightly weaker than Polylactic Acid (aka PLA), so I assume they'll roughly be equal. I'd also assume PET-G will be pretty strong.
I'm ordering some of this for my next batch of scales--"Dark Yellow" glow in the dark PET-G filament--I'll use it for some keyrings and whistles as well--but I have so many modern secondhand SAKs with scratched, chipped, and even warped scales. Looks like it'll match Stayglow pretty well....
Amazon.com: SUNLU PETG Glow in Dark Filament,1kg(Yellow,Glow Yellow) | Luminous PETG 1.75mm, High Brightness Filament, Dimensional Accuracy +/- 0.02mm : Industrial & Scientific
Amazon.com: SUNLU PETG Glow in Dark Filament,1kg(Yellow,Glow Yellow) | Luminous PETG 1.75mm, High Brightness Filament, Dimensional Accuracy +/- 0.02mm : Industrial & Scientific
(www.amazon.com)


-
Yeah I got a little emotional as well.
I think someone was cutting onions around here.
@cody6268 said:
I'm ordering some of this for my next batch of scales--"Dark Yellow" glow in the dark PET-G filament--I'll use it for some keyrings and whistles as well--but I have so many modern secondhand SAKs with scratched, chipped, and even warped scales. Looks like it'll match Stayglow pretty well....Let me know how you like it. I've been considering getting some GITD filament. I printed some PLA scales for my Ranger and they've done well for over a year now.
-
<u>Day 12 - Mini Challenge</u>
We cleaned out my aunt's house during the summer to be able to sell her house and close her estate. I started cleaning in my grandfather's room and we found so many of his tools in there. My brother and I split up them up and below are a select few of the ones I wanted. My father was a cattle rancher until the end of his days. They would split their time between the house in town and the house at the ranch.
This first one is a can/bottle opener combination. I remember seeing one like this at my grandparents ranch house. You can see my P-38 that I'm carrying for this challenge and new fangled can opener on the right that works pretty well.
Up next is a sledge hammer that had it's handle replaced with a long bolt. Highly likely that grandpa fixed it the ranch with what he had available. Necessity is the mother of invention.
Grandpa's old hatchet next to a newer one that my sister bought me. I've debated about restoring the hatchet a bit as it's still useful but I'm not sure yet. I might try and re-use the handle and just give it an edge.
I picked up this hand drill from an older gentleman a few years ago. He was selling his house to move in with his daughter and didn't want to fill up her house with his old tools. My trusty Dewalt doesn't seem to look as cool.
Lastly is my good looking carbone No 8. No good story behind this one except that it's my first Opinel. It came with a knife lot I purchased last year. I really like the patina and that it shows it's age and usefulness.
-
Day 13

-
Day 12:
screwing around with a magnet.


-
@Farmer X said:
Great story...and in the course of over 47 years, I think that's the first time I've heard the word "fossiliferous."A word I learned from my dad, funnily enough. He had a lot of good words. Among his other interests he was a solver and setter of cryptic crosswords. There was a particularly difficult one that featured in one of the Sunday newspapers here, where there was a prize drawn from all the correct solutions that were posted in. He would send it off every week. The prize was a Chambers dictionary, and he ended up with about half a dozen of those red dictionaries in a row on the shelf. His trophies.
-
Day 13

Changing batteries. The most frequent screwdriving task for me. My current setup lets me do it in style!
-
Day 13
Yes, that is my cute little Buck knife on top of a Coke machine. There weren't any drinks in the vending machine, in spite of the $3 price for one soda there. The owner decided he wasn't making enough money, so his solution was to keep raising prices on everything. HIgher prices equal more money, right? It killed the business off. Not many customers, so naturally prices got raised again. Find yourself in a hole? Dig harder.
Hats off to our friend Farmer X for his most excellent challenge. Many good entries for the Friday Mini. Some evidently didn't get the memo. The ones who did play along got all the fun to themselves.
I'm really liking the burl handled little Buck knife. I grabbed it out of the SOS box so I could use it for a badge. That meant I started carrying it for a while. Then more often. I carried the tiny Old Timer stockman for a day, but it is hard for an old Big Knife guy to go small. The Buck isn't a large knife, but it has been a simple joy to carry and use.
Best wishes, G

[attach id=0 msg=2555882]
-
Day 13
Eye Brand carbon steel soddy
Reylight Copper Pineapple flashlight
Homemade keyring bit driver
And a new addition, aluminum pillbox for carrying bits.
-
Day 13
I always carry these field tweezers/sliver grippers along with my keys. They are better than SAK/MT tweezers, and I always have a pair of tweezers without worrying about whether I’m carrying a SAK with tweezers or not.

-
@AzteCypher said:
Up next is a sledge hammer that had it's handle replaced with a long bolt.Fantastic MacGyver-ism!

@IMR4198 said:
There weren't any drinks in the vending machine, in spite of the $3 price for one soda there.Either that was the price of an energy drink, or somebody is really feeling the squeeze of inflation.
@nate j said:
I always carry these field tweezers/sliver grippers along with my keys.
Where did you scare those up?Day 13
From last night: some P-51 action. It did a damn fine job.
[attach id=0 msg=2555945]
Unless the can has a chamfered bottom, I don't use the pull tab.
[attach id=1 msg=2555945]
My P-51 is marked "US Shelby Co." They are also made by Speaker. I have a P-38, which I have yet to use, but I've seen the P-38s available for as little as $0.59.
[attach id=2 msg=2555945]
Finally, here is a shot of the P-38 and P-51 together.
[attach id=3 msg=2555945]
.jpg)
.jpg)
.jpg)
.jpg)
-
I like the folding can openers. If you carry one on your keys or something, you might want to put a strip of tape to hold the blade closed. They open up and turn into a pocket and/or finger poker. I also ran into that little hazard carrying a screwdriver loose in my pocket. I have a tiny Stanley screwdriver that has a pocket clip. That one is pretty friendly clipped to a shirt pocket.
The $3 drinks are ordinary 20 oz. plastic bottles of Coke and similar. The teeny little one use Tide and Gain boxes are $2.50. I see people balk at the prices and have given away detergent several times from my own jug. Likewise, I have mooched drier sheets from people. I refused to pay $2.50 for two softener sheets in the same kind of little box.
Best wishes. G

-
Day 13
Had to tidy up tonight, party with friends is on the calendar and hopefully reachable as we are plunging into a deep freeze and it is now snowing.
Anywho, reached into my pouch and extracted the nail file to tidy up some rough edges before they snagged material and ripped back and become more troublesome.
The pouch
[attach id=0 msg=2555954]
And file
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




