End of year Mad Max challenge?
-
@HarleyXJGuy said:
Day 12As you can see from my watch I am late with this post.
Casio A168. Probably the cheapest watch in my collection but also probably one of my favorites. Incredible lightweight and nostalgic.
While I have watch bracelets and bands that cost 5 times as much as this entire watch this one still manages to be comfortable. Doesn’t pull hair or pinch and has a easy to use anywhere adjustment mechanism.
If you are someone who likes to tinker with things, aka everyone here. Do yourself a favor and do NOT look into mods that can be done to this series of watch. Your bank account will not appreciate it.

Used the Backside Technical Screwdriver to adjust the band size.

Tools used so far.
1 Awl
2 Large Blade
3 Large Flathead
4 Small Blade
5 Corkscrew Mini Screwdriver
6 Scale Pin
7 Can Opener Small Screwdriver
8 Pruning Blade
9 Backside Technical ScrewdriverI'm a big fan of the basic Casios, though I usually swap to a fabric band. That's about as far as my watch modding goes.
-
Monday 12/15 Mini Challenge: It has WHAT!?
Awl of these giant SAKs have at least one or two weird tools that're mostly unheard of on multitools and, usually, not actually very practical.
Your mission, if you choose to accept it, is to pick the most obscure tool on your multi and use it by Monday.
-
@HarleyXJGuy said:
If you are someone who likes to tinker with things, aka everyone here. Do yourself a favor and do NOT look into mods that can be done to this series of watch. Your bank account will not appreciate it.Changing the polarizing film is about as far as I'd go...and I'll do that one of these days. Converting the LED backlight to electroluminescent is probably impractical at best.
@HarleyXJGuy said:
It is from a company in Honduras or Nicaragua maybe?Per Google Translate, "Hecho en Méduco" is "Made in Mexico." I always thought the Spanish translation of Mexico just aded the accent mark above the E.

@BPRoberts said:
Your mission, if you choose to accept it, is to pick the most obscure tool on your multi and use it by Monday.This oughta be good!

-
Day 13
I've awlways felt that the mag-glass-driver was an odd choice. I still think it is. Awl that said, the extra reach was a huge help here. The cap lifter driver fit, but was a pain to get into the space.

-
Looks like mission accomplished.
-
Day 13
Both scissors of the duke needed a cleaning. Now they work like a charm.

-
Day 14
15 layers are almost too for the fish scaler.

-
Speaking of fish scalers...
Day 14
The Wenger scaler has no ruler (instead putting it on the compass) but it does have a line guide. Wenger never got the parcel hook, but I imagine this could handle some of its duties in a pinch.

-
@BPRoberts said:
Monday 12/15 Mini Challenge: It has WHAT!?Awl of these giant SAKs have at least one or two weird tools that're mostly unheard of on multitools and, usually, not actually very practical.
Your mission, if you choose to accept it, is to pick the most obscure tool on your multi and use it by Monday.
Pfft I already used the Straight Pin as a tool to adjust my watch band.
-
Day 14
Well it’s snowed four or five times already and we have a good five inches on the ground.
Guess it’s safe to take out the screen and put the window into the storm door.
XLT handled the business.

Tools used so far.
1 Awl
2 Large Blade
3 Large Flathead
4 Small Blade
5 Corkscrew Mini Screwdriver
6 Straight Pin
7 Can Opener Small Screwdriver
8 Pruning Blade
9 Backside Technical Screwdriver
10 Bit Driver with Bit Holder -
@HarleyXJGuy said:
Day 14Well it’s snowed four or five times already and we have a good five inches on the ground.
Guess it’s safe to take out the screen and put the window into the storm door.
XLT handled the business.

Tools used so far.
1 Awl
2 Large Blade
3 Large Flathead
4 Small Blade
5 Corkscrew Mini Screwdriver
6 Straight Pin
7 Can Opener Small Screwdriver
8 Pruning Blade
9 Backside Technical Screwdriver
10 Bit Driver with Bit HolderGood work!
Do you have a lot of snow compared to the past?
-
Day 15
So I dig out my old dress uniform to show the grandkids Sunday. Noticed on of my ribbons was loose.

Nothing the XLT Pliers can’t sort out.

Tools used so far.
1 Awl
2 Large Blade
3 Large Flathead
4 Small Blade
5 Corkscrew Mini Screwdriver
6 Straight Pin
7 Can Opener Small Screwdriver
8 Pruning Blade
9 Backside Technical Screwdriver
10 Bit Driver with Bit Holder
11 Pliers -
@HarleyXJGuy said:
I dig out my old dress uniform to show the grandkids Sunday.I was awarded one or two of those medals myself.
-
Day 15
Took out a security bit from the box.

-
Day 16
Actually, it's just a bottle opener with some extra benefits...

-
Day 15
The TC+ is actually kind of light on weird tools. We would've needed a Toolchest Plus XL Turbo to get all the great weird Wenger tools like the toilet paper key.
The most creative use I could think of was checking what direction my front door faces. As you can see, the answer is south-ish.
[attach id=0 msg=2556255]
Day 16
The Wenger in line Phillips is a bit stubbier than the Vic counterpart, but does have the semi-lock like the flathead. It's paired with the wrench, which I've used a few times in the past, but not this month. I think it's a solid tool, one of the Wenger exclusives that'd be worth bringing over to the Vic line.


-
@BPRoberts said:
I think it's a solid tool, one of the Wenger exclusives that'd be worth bringing over to the Vic line.
I think I'd have more use for the Wenger wrench than I would the magnifying glass or the LED.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login