December 2025 Tool Box Challenge
-
@Humayd A R Mahomedy said:
The mounting frame/bracket is attached to the car [probably screwed iirc] and the plates have to be riveted to the frame,to prevent theft.That makes sense.
@IMR4198 said:
I need to get a better look at alternatives from W-Mart. Small and rechargeable would be preferred. Oh well.I have no idea what Wal-Mart offers in that regard, but you have scads of good options available in general.
@LoopCutter said:
My kit this TUESDAY!Beautiful bones on that 75!

Day 16
My "at-home carry" lately has been the sage green No. 6. Today I used it to break into a jar of instant coffee.
[attach id=0 msg=2556268]
[attach id=1 msg=2556268]
.jpg)
.jpg)
-
-
Day 17

-
@ReamerPunch said:
Day 17I had a look at Harnds knives and they seem like good value if the quality is there. How are you finding it?
-
I like it. I got it for the Orange Challenge a while back. I am happy with it for what I paid (around $40 AUD I think). It is thin so rides well in a pocket, ergonomics are fine, it holds an edge, opens reliably. The blade is a little big, so I don't carry it as often anymore.
-
Day 17
Opinel No. 08 on a little walk. I saw a bobcat track in the mud with a coyote track on top of most of it. There was a small deer track within about 6 inches of the both of them. If I can find some relatively economical batteries, I will have a good location to place a camera. The store where I usually find them on sale has removed their display and 90% of the batteries. What few dregs remain are expensive.
Best wishes, G

[attach id=0 msg=2556299]
-
@ReamerPunch said:
I like it. I got it for the Orange Challenge a while back. I am happy with it for what I paid (around $40 AUD I think). It is thin so rides well in a pocket, ergonomics are fine, it holds an edge, opens reliably. The blade is a little big, so I don't carry it as often anymore.Thanks, good to know.
-
Day 17
Ripping out carpet.

The mini pry bar helped a little, but the bigger Hultafors bar did most of the hard work - prising up those horrible gripper strips, and the 200 staples that were left behind when I tore out the underlay.
With carpet gone, another bed was taken apart and re-assembled in this room:

This tiny spanner was the tool that saved me here, as I had to tighten a couple of bolts in an extremely small space. Which supports my view that if you see a tool that you think might come in handy one day, and price is not an issue, you should get it. That spanner sat unused in my tool bag for years, but now came its chance to shine.
It certainly beats buying a tool because you just had a job where you needed it, and great frustration ensued because you did not have it. An experience I have had many times. The only thing more frustrating is knowing the exact tool you need, knowing you have it, but not being able to find it. Another experience I am no stranger to.
-
There have been several small adjustables in this challenge so far. I carried one for a day but didn't use it. Little 4 inch IREGA. Bought it at a flea market for $1 since it was cute. It stays on my bench, and I use it now and then. Best wishes. G

[attach id=0 msg=2556306]
-
@IMR4198 said:
There have been several small adjustables in this challenge so far. I carried one for a day but didn't use it. Little 4 inch IREGA. Bought it at a flea market for $1 since it was cute. It stays on my bench, and I use it now and then. Best wishes. G

That one I used is an Irega also. Seems a good little tool, so far.
-
Day 17
Today will be running errands today plus one appointment, and not certain any tools will be required.
Following the theme of adjustable wrenches I located mine hiding in the speciality pouch. It is a DEWALT 150mm, and needs some cleaning, as most times and the last time used it may have gotten caught in the rain.
Pry bar was added since retirement, when on the job a Stanley Wonderbar or equivalent was normally employed do to the HD need. Inspection mirror and extending magnet each saved me on more occasions I care to remember.
[attach id=0 msg=2556313]
Packed up awaiting for duty to call-
[attach id=1 msg=2556313]

-
No tool bag is complete without the telescoping magnet or mirror. Best wishes. G
-
Day 17
Using the Vise grips to fit a new tail cap spring to a Maglite.
Knife: 25OT.
-
@fullbreakfast said:
Ripping out carpet.An arduous task, but worth it in the end!
@IMR4198 said:
No tool bag is complete without the telescoping magnet or mirror.@WECSOG said:
Using the Vise grips to fit a new tail cap spring to a Maglite.
It's a shame Mag Instrument did so poorly adapting to and keeping up with changes in the flashlight world.Day 17
Until I gave myself a haircut last week, I didn't think I had single-function scissors. These are intended for barbering, but they've done just fine on cloth and paracord. The holes in the handle are not friendly to those wide of thumb.
[attach id=0 msg=2556370]

-
Day 17
My EDC pen, a Fisher Bullet in gold Titanium Nitride…

-
@IMR4198 said:
I started thinking about how good some biscuits would be on a cold day like today. Next thing I knew, there were some in the oven. Evidently the biscuit baking center of my 40 Watt brain took over guidance of necessary body functions. Turned out that I had more dough than pan, so I had to squoze some in there. They came out fine anyway. Full disclosure. No multi-tools were used in the preparation of this bakery item.
Best wishes. G
:ahhh
[attach id=0 msg=2556185]Those look similar to what we call scones here.
@WECSOG said:
Not really. Alcohol is less volatile; lighter fluid is closer to petrol. In fact I have used plain old automotive petrol in my Zippos. I've made alcohol work too, but it has to be warm.Alcohol is good for burning in a small can, for cooking or heating water. Lighter fluid or petrol burns way too fast for that.
Thanks for that info WECSOG.
I made a "hobo" stove some years back,ran it with methylated spirits (which I've just googled is basically denaured alcohol with some additives to prevent consumption. I think there is a "clear" version with less additives,guess we've been using denatured alcohol all along :D).Day 10
I missed the mini challenge,today's post will be in the spirit of that challenge.
I got into knives, shooting and knifemaking through my father,who had an interest in knives from his youth. My grandfather was not of a similar mindset and did not allow my father to own or carry knives.
When my father decided to get into guns,as he was paying for his first (a 4in colt python which he still has) he bought his first decent knife,a Case Bowie,their reproduction of the V44 Bowie (guess where i get my love for big blades from :D). He probably bought this in 1979,or 1980.
Over the last few years,my father gave me most of his old knives,and this was 1 of them (i took this pic a few days ago,intending to enter the mini challenge).
[attach id=0 msg=2556383]Some time after that,my father gave me his old gerber drop point folder,1 of his edc's from then,used for years. I know he bought this knife in the early 80's,definitely 1983 or earlier,but I can't recall exactly when. I think I even saved the box,but forgot where I put it.
My father was into Gerber and Almar knives then,and at least 1 Kershaw from that time.
I have those too,2 of which I "spirited away" a few decades ago (my father knew but didn't say anything). Everything in my life is due to my father's support and guidance. We aren't emotional like that,but I'll tell him somehow, someday.
[attach id=1 msg=2556383]A friend,and former bowhunting buddy (he had to stop archery due to health issues,and i slowed down around the same time) recently gave me this Gerber Bolt Action folder (i think this was 1 of Blackie Collins' designs). He bought it new back in the day,it's also seen some years of use.
[attach id=2 msg=2556383]


-
@Farmer X said:
It's a shame Mag Instrument did so poorly adapting to and keeping up with changes in the flashlight world.I disagree. I have quite a few modern flashlights, and I'm glad Mag still makes their old school lights. For some purposes, 2 D cells powering a PR2 or PR6 works just fine. I have a few 2D Mags in various locations for those purposes.
And, the Maglite in the photo is an ML50L (LED) that uses 3 C cells and will put out over 700 lumens for over 9 hours on high, around 100 lumens for a couple of days, or 20 lumens for 184 hours. 20 lumens is enough to read by, or it can light a room well enough to safely walk through during a power outage. For over a week, continuously.
Maglites are also very moddable. In fact I'm thinking about building a 1S2P pack of 21700s for the ML50L, which will give basically the same voltage and greater capacity than 3 alkaline C cells. If I do that I will probably eventually swap the emitter for one with a warmer tint and high CRI. Maybe a different driver, too.
Then of course there are some of the custom incan Maglites that will start fires at close range. -
Day 18
Cutting sausage.

I had just used my utility blade, seen lurking at top of shot, to open the packet.
-
Day 18
Yes, biscuits in the US are like scones. Might be served with preserves or jelly or by themselves. Very good split open and covered with gravy made with pepper, country sausage drippings and chunks, and milk browned together in a skillet. Might just put a slice of ham inside or maybe bacon with a scrambled egg. Good breakfast.
Toddled down to Walmart yestiddy. Visions of little flashlights dancing in my head. The store was full of people whose sole purpose seemed to be standing in the way. Christmastide narcosis. I forgot about navigating that bunch to the hardware/sporting goods and headed for groceries. I have been reading how W-Mart is taking out self-checker lanes because of petty purloining, but this store has them. All jammed. I got in line and finally headed home.
No knife gift sets photos like I said I would obtain. Maybe another day. I wouldn't have bought anything anyway. I dropped my last remaining cheapie black flashlight the night before. I picked it up and it had a bad case of rattles. Still worked. I got peeved about losing my other black 2AA light and decided to tear the house down board by board until I found it. I had already looked at the likely spots where I would have put it. No go. What was left? Look in the places where I know it wasn't. Bingo. I found it. Good as new. Ahh, good as it was when I lost it anyway. Between the two of them and my balky Gerber mini, maybe I can get through the winter. I stopped by Dollar Tree, where nothing is a dollar anymore, and saw some Rayovac Alkaline Fusion AA batteries. Pack of 4 AAs coat $5. It would cost $10 to put batteries in a trail camera. I think I would sell a camera for that much. I could buy Rayovac Alkaline 4AA for $1 about 3 years ago, and $1.25 last year on sale. Last ones I bought were smurf.
I have been Opinelling for the last few days. Plain sometimes and blue sometimes. Here is the blue one with the Gerber 1AA. Best wishes, G

[attach id=0 msg=2556406]
-
Day 18
This WorkPro is good especially for the price. But the black one is much better. This one is a little slippery. If you are thinking of getting one, get the black one.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
