December 2025 Tool Box Challenge
-
Day 17:
The dryer died for the third and final time. My grandmother insisted the last two times on calling a place that Lowe's often recommends, but has a reputation for ripping people off (they also use generic Amazon knockoff parts and charge OEM prices). She paid as much to buy a new washer when it didn't work long afterwards.
Used my Hyper Tough "3-in-1" drill (basically an installation driver) to take it apart.
Before a new one is bought, I'm gonna try a new thermal fuse. I suspect the knockoff heating element or thermostat they used was what failed again. The thermal fuse is the only thing I've tested, and it's blown.
[attach id=0 msg=2556503]

-
Day 18
My kit at end of the day.
[attach id=0 msg=2556507]
-
-
-
@cody6268 said:
The dryer died for the third and final time. My grandmother insisted the last two times on calling a place that Lowe's often recommends, but has a reputation for ripping people off (they also use generic Amazon knockoff parts and charge OEM prices). She paid as much to buy a new washer when it didn't work long afterwards.Used my Hyper Tough "3-in-1" drill (basically an installation driver) to take it apart.
Before a new one is bought, I'm gonna try a new thermal fuse. I suspect the knockoff heating element or thermostat they used was what failed again. The thermal fuse is the only thing I've tested, and it's blown.
Unfortunately, I think we have reached the point with many household appliances where they may be worth repairing if and only if you can do the work yourself or know someone who will do the work for free. If you have to pay someone to do the repair work, you’re better off just putting the money you would have spent on the repair towards a replacement.
Do consider used appliances though. Last time my dryer died, my wife found us one that was used less than a year for $50.
-
Day 13:
Used a little socket wrench to assemble a wreath.

-
-
Day 14:
I don't use scissors that often. I never carry any. But I just got this nice pair of scissors that say "made in Italy" on the side. They will probably come in handy for gift wrapping. this year.

-
Day 15:

-
Day 16:
This is my truck hatchet. I actually use it as a hammer a lot more often than I use it to chop any kind of wood.



-
Day 17:
I was hanging Christmas lights on the trim of my roof yesterday. I didn't get any action shots since I was busy trying to not fall off the roof. But I used this little cats paw to pry the nails a bit to fit the strands of lights up on the trim. It worked. mostly.

-
Day 18:
Ok, honest question. Do we consider a shoe horn to be a tool? I bought this one at the Red Wings store. It was over priced but I don't regret the purchase. It works well as a shoe horn and it works REALLY well as a back scratcher. (the manner in which it gets used daily)




-
@King_Gorilla said:
Day 18:Ok, honest question. Do we consider a shoe horn to be a tool?
Just call it a foot pry bar and the EDC boys on Instagram will be all over it. You could start a trend.
-
@ReamerPunch said:
Day 19Kinda early but it is 8am here.
Mini challenge: Plier Wrench to open sealed pistachios.
Excellent!
I see you could not wait to eat those pistachios. One of my favourite nuts (and ice cream flavours).
-
Day 19
Mini challenge, alternative use of a tool that it was not intended for.
Here is something everyone knows about, but I had never actually tried.
In my EDC pouch I have a couple of needles and some thread:

I magnetized the larger needle and suspended it from a bit of thread to see if I could get it to function as a makeshift compass.
It worked!

The only tricky part was adjusting the position of the knot to get the needle balanced horizontally. Also, I did not appreciate until I tried this, how careful you need to be to have your needle well away from other ferrous material that will interact with a magnetic field. I initially tried suspending the needle using a rod placed across the open doors of a steel cupboard. It did not work properly.
Now I just have to remember that it is the eye end of my needle, not the point, that indicates north.
Side note, I considered using my mini ferro rod for this instead of a needle, but the Internet tells me that ferrocerium is not in fact sufficiently ferrous to be magnetised. Too much other stuff in the alloy.
This was my serious entry. I also have a silly one that I will post later.
-
Day 19
mini-challengeI didn't use my Carbone no.8 for this since I keep a little oil on the blade to ward off the rusties. This one is the nice clean stainless no.8 used as a spatula to spread a butter, cinnamon, brown sugar mix over my pumpkin spice bread batter before baking. Tastes like gingerbread. Yummers.[attach id=0 msg=2556546]
The finished loaf with a sugar frosting glaze. Very tasty.[attach id=1 msg=2556546]


-
@IMR4198 said:
Day 19
mini-challengeI didn't use my Carbone no.8 for this since I keep a little oil on the blade to ward off the rusties. This one is the nice clean stainless no.8 used as a spatula to spread a butter, cinnamon, brown sugar mix over my pumpkin spice bread batter before baking. Tastes like gingerbread. Yummers.[attach id=0 msg=2556546]
The finished loaf with a sugar frosting glaze. Very tasty.[attach id=1 msg=2556546]
Great use! Also, I really want a slice of that gingerbread loaf.
-
@King_Gorilla said:
Ok, honest question. Do we consider a shoe horn to be a tool?The first definition for tool in the Oxford Dictionary is “a device or implement, especially one held in the hand, used to carry out a particular function”. So I believe a shoe horn would qualify.
-
@IMR4198 said:
Day 19
mini-challengeI didn't use my Carbone no.8 for this since I keep a little oil on the blade to ward off the rusties. This one is the nice clean stainless no.8 used as a spatula to spread a butter, cinnamon, brown sugar mix over my pumpkin spice bread batter before baking. Tastes like gingerbread. Yummers.[attach id=0 msg=2556546]
The finished loaf with a sugar frosting glaze. Very tasty.[attach id=1 msg=2556546]
Looks delicious!

-
@fullbreakfast said:
Day 19Mini challenge, alternative use of a tool that it was not intended for.
Here is something everyone knows about, but I had never actually tried.
In my EDC pouch I have a couple of needles and some thread:

I magnetized the larger needle and suspended it from a bit of thread to see if I could get it to function as a makeshift compass.
It worked!

The only tricky part was adjusting the position of the knot to get the needle balanced horizontally. Also, I did not appreciate until I tried this, how careful you need to be to have your needle well away from other ferrous material that will interact with a magnetic field. I initially tried suspending the needle using a rod placed across the open doors of a steel cupboard. It did not work properly.
Now I just have to remember that it is the eye end of my needle, not the point, that indicates north.
Side note, I considered using my mini ferro rod for this instead of a needle, but the Internet tells me that ferrocerium is not in fact sufficiently ferrous to be magnetised. Too much other stuff in the alloy.
This was my serious entry. I also have a silly one that I will post later.
Good work!

Assuming your needle is small and light enough to float, I have heard (not tried) that floating it in a cup of water or expedient puddle can be an easy way to avoid the challenge of getting the knot at the needle’s center of gravity. Just have to take care that the needle is truly free to rotate, i.e. not touching the sides (or bottom) of the vessel.
Also, as you say, the importance of keeping metal away can’t be overstated. I was out once on a Scout campout when one of the other leaders started playing with a small compass. He noted it appeared to be junk/broken, as it wasn’t reading accurately. I asked to see it, and promptly removed the little metal clip (presumably added to allow it to be attached to a zipper pull or the like), whereupon it immediately began reading correctly.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login




