December 2025 Tool Box Challenge
-
Day 22

-
Day 22
Getting organised for some Christmas baking.

-
Day 22
I thought it might be appropriate to post a ratchet. This was used with the extension and flat driver bit to tighten a door lock. I know the Grand Poobah and Potentate of ratchets is on here and I didn't want to arouse his ire by neglecting this tool. Might be bad. Could get Reamed or Punched. Ouchie.

[attach id=0 msg=2556818]
-
ME TOO MINI CHALLENGE
Friend Nate J has laid out the requirements for the December 26th challenge. It occurred to me that there might be someone out there who wanted to do a mini challenge. Maybe they had a good idea for one. Here is how you get in on the fun. Send me a PM and say you want in. I will announce the contestant and set the date for the last mini-challenge to be Dec 29.Late Edit
Friend ReamerPunch has volunteered to do the last mini-challenge for Dec 29. He will announce the requirements at his leisure. Thanks to all who have hosted the mini events this month and likewise to all who participated. Best wishes. Gary

-
I thought it might be appropriate to post a ratchet. This was used with the extension and flat driver bit to tighten a door lock. I know the Grand Poobah and Potentate of ratchets is on here and I didn't want to arouse his ire by neglecting this tool. Might be bad. Could get Reamed or Punched. Ouchie.

[attach id=0 msg=2556818]Nobody is in danger of getting either of those.

But I will ban members for not laughing at my jokes. >:(
(Not really, please don't tell Grant).Nice ratchet!

-
-
Day 22
A promise of more day light this day in the Northern HEMISPHERE, so excited

A knife blade continues to be my most used implement this month. My two working knifes that are in reach, either on the bench or clipped to the pouch are the Emerson/Kershaw CQC-5 & the Rough Ryder Work knife.
And yes, the Case ‘75 or a ‘47 are in my pocket for times I am away from home most days.
[attach id=0 msg=2556841]
Surprising to me, is size similarities. I had not noticed my selections were about the same size. The CQC-5 has been a reliable work knife in front pocket for maybe 8 years. The RR only 5.

-
I like em!!
-
@ReamerPunch said:
Nobody is in danger of getting either of those.
But I will ban members for not laughing at my jokes. >:(

Just want to be on the safe side!

@ReamerPunch said:
711L mini ratchet. I've reviewed it in the Mini Ratchet review marathon
Link in my signature. It's a nice little ratchet. Same head as the Topeak/Granite/Giant/Blue Point.I have a Lyman lubrisizer that came with one of those for cranking down the lube pump. I've had it for over 40 years and have used it a lot, with never a sign of wearing out.
-
Day 22
I dug around and found a Mag Solitaire. It's not one of the Camel branded ones, but I've still had it for years. I don't even remember when I got this one.
Also found a couple more EDC items: an aluminum whistle and a liquid fueled lighter. I bought a bag of those lighters a few years ago. It works on the same principle as a Zippo. It's pretty decent quality for as cheap as it was. Has an O-ring to prevent leakage. It's heavier than it looks, too. It appears to be made of plated copper.The knife is my carbon steel Mercator Black Cat.

-
@WECSOG said:
I have a Lyman lubrisizer that came with one of those for cranking down the lube pump. I've had it for over 40 years and have used it a lot, with never a sign of wearing out.I had a Lyman 450 that came with one too. Same identical ratchet. I finally stripped out the nut that holds the sizer dies in on the 450, and called Lyman. The gal who answered the phone said she would just ship me another part. Free. I used to buy parts for Lyman tools on an open account. I would say what I wanted and they would ship them with a bill payable in 20 days. I don't think companies operate like that anymore.Best wishes. G

-
@IMR4198 said:
I had a Lyman 450 that came with one too. Same identical ratchet. I finally stripped out the nut that holds the sizer dies in on the 450, and called Lyman. The gal who answered the phone said she would just ship me another part. Free. I used to buy parts for Lyman tools on an open account. I would say what I wanted and they would ship them with a bill payable in 20 days. I don't think companies operate like that anymore.
Best wishes. G

I'm happy to hear about the free part. RCBS has always operated like that too. I have some quite old equipment from both companies. I have some Ideal stuff too, which (as I'm sure you know) was the predecessor to Lyman. I'm a big fan of the steel handled "nutcracker" tool. Come to think of it, I could have used one of those to crack pecans for the last mini challenge! :D
-
@Barry Rowland said:
This looks like a great challenge!It sure is. Perhaps I'll see you in a future run!
@LoopCutter said:
A quiet day at home.Always a good thing!
@AzteCypher said:
Also posting a shot of the canoe because it looks real sharp in my opinion.
@ReamerPunch said:
711L mini ratchet. I've reviewed it in the Mini Ratchet review marathon
@WECSOG said:
I dug around and found a Mag Solitaire. It's not one of the Camel branded ones, but I've still had it for years.The lanyard on my Solitaire disappeared long ago. I guess that Camel promotion ran after I picked up the habit. I never did anything with all that Camel Cash. Maybe I should have, as I used to smoke like a two-stroke Diesel. And I like the Mercator!
Day 22
A couple of Case Knives: a 6.5225 1/2 from 2022 and a 6254 from 1978 (my birth year). I've never determined if the 6254 is bone or jigged Delrin. Case would have done well to use different designators for those cover materials...and not polishing their stainless blades so heavily.
[attach id=0 msg=2556884]
I also switched the "at-home carry." The olivewood No. 6 at the top is filling that role. At the bottom is a safe queen. The Rubik's Cube is included in the photo because I've been farting around with it a lot lately.
[attach id=1 msg=2556884]
Tomorrow y'awl will see some tools that were in the USPS system yesterday.
.jpg)
.jpg)
-
Day 19:
I dug out my old Jakks Pacific Atari emulator from the mid '00s. It was bought as I didn't know how to get my Dad's old Tele-Games Sears Atari working properly (it's still around here--hoping I can find it). The batteries have corroded badly inside, and it's probably toast.
Tools used--every PH1 I had in the basement until I found one that worked (Master Mechanic PH1--others are '00s USA Xcelite and '90s Popular Mechanics USA). In January, I'm replacing my hodgepodge mess down here with either Icon or CAT/Williams. Depends on what sales Harbor Freight is running--and the CAT dealer occasionally has big parts specials that include tools.
That being said, an antique store near my house has a 2600 cheap--and a comic book store here locally has good prices on some older consoles (just not anything Nintendo...).
[attach id=0 msg=2556893]

-
Day 20:
Rigid RG-24 (full serrated--and cuts great) and Crescent 6" linesman's pliers.
Not sure how old these pliers are. The pair that I had lost at the time (but later found) had engraved markings--yet these are stamped. Good thing about getting a replacement--cutters are still good.
The Ridgid is from the '90s. I got it new old stock for like $20 a few years ago. It's every bit as good quality as Spyderco (guessing probably a Hiro or Sakai product--both OEMs that have made certain Spyderco models in the past--but also made tons of low-cost brands in the '80s and '90s). There's just something about the myriad of Japanese knives in the '70s and '80s. They're good knives that weren't expensive knife, and still aren't today.
I used to hate the fact the knife sits high, but it's easier to pull out of my pocket with my gloves on.
[attach id=0 msg=2556894]

-
Day 21:
The old fridge was worn out, and taking more time to keep cool. So, when my grandmother and I went to Lowe's to buy a dryer, we found this LG at a deep discount.
Only thing I don't like--it's designed for IOT, and can connect to an app. But, for $1500 down from $3200, it was decent.
Used my ADC Mini Medicut shears and Byrd Robin 2 Wharncliffe full serrated (traded a worn-out Harpy for it at a local Spyderco dealer). The Byrd is my lawn mowing knife, as it cuts through branches that whack me in the face easily (and like a laser), but fits in cheap shorts. In the winter, it's a twine knife.
PS: I did accidentally cheat today. I was helping the delivery guys rip out the old dryer, and the vent hose was hanging up. I cut through the spring steel with the Ozark Trail Multiforce that lives in my coat.
[attach id=0 msg=2556895]

-
@Farmer X said:
I used to smoke like a two-stroke Diesel. And I like the Mercator!Day 22
A couple of Case Knives: a 6.5225 1/2 from 2022 and a 6254 from 1978 (my birth year). I've never determined if the 6254 is bone or jigged Delrin.
A buddy of mine used to joke that Harley should offer their own brand of cigarette: filterless and infused with 60 weight motor oil to make you cough out blue smoke and sound like a worn out old Panhead! :D
That's a good looking 6254. I have one in red bone that my Dad gave me back in the '70s.
-
-
Day 23
Guinea Bissau came!


-
Day 23
Taking an old cupboard off the wall.

It was dark in that cupboard, and to start with I thought whoever put it on the wall had cammed out some of the screw heads. Then I brought better light to bear and realised three of the four screws were PZ3, not PZ2, which was why I wasn’t getting traction. As luck would have it the first one I tackled had fit the PZ2 I had loaded, but the others were different.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login