December 2025 Tool Box Challenge
-
Day 23
[attach id=0 msg=2557001]
Work knife

-
Day 24
I took apart the old cupboard that I removed from the wall yesterday. It was built the old-fashioned way, with lots of screws, and this was a good workout for my 711L-based bit driving kit.



The pry bar also came out to play.

As I was working, I thought about whoever it was that had built the cupboard. No idea who it would have been, but I feel like it was at least 40 years ago. I don’t think this was a flat pack job. The guy bought his materials, cut to size, and built it to a plan. The result was no work of art, but it was completelys solid, and could have stood up to another 40 years without a problem. If it was built by a former owner of the house rather than a tradesman, he probably felt a certain sense of satisfaction whenever he looked at that cupboard. Either way, he is more than likely dead now. If I was doing this job ten or twenty years ago, I wouldn’t have had these thoughts.
Of course I harvested the hardware.

These little bags are so useful, for many things. A packet of 200 does not cost much.

Perhaps this is not normal. My wife would question it. But I know it’s not OCD because I didn’t count, clean, measure and label them.
The cupboard is no more, but its screws live on. And will be used again, or perhaps thrown away by my wife or son after I too have ceased to be.
-
Day 24
Second Mini Flex

-
Dec 24
One of the posts reminded me of the joke about old men having a shelf in the garage with a line of baby food jars full of salvaged screws. All nonsense of course. I keep mine in an old coffee cup in the mudroom. That's the indoor supply. There are more in the tool house. Oh, and some more in cans in an old china cabinet. Along with rivets, washers, and other assorted things. Not to mention springs and a few other items. I have enough nails to roof a house. Still Opinelling for a few more days. Best wishes. G:D
[attach id=0 msg=2557024]
-
Day 24
This Case 18 pattern medium stockman is one of my desk knives. S35VN steel & brushed bolsters. Holes in the blade look odd to those of us used to nail nicks, but functionality is pretty much the same.

-
Day 24
Continuing my recent theme of portable lighting, here's an old Teledyne Big Beam Model 266 lantern that just arrived in the mail today. The sealed beam bulb is still good; all it needs is batteries. It takes two of the spring-top 6V square batteries. They are in parallel, so it will actually work with just one. But I don't plan on buying any of those. The plan is to modify it to use other, rechargeable batteries. Either AGM lead acid or some of my scavenged 18650 lithiums. I might even switch out the bulb for a 12V or maybe even a 28V aircraft landing light! Who knows.
This Zippo was presented to my Grandad by one of the companies he retired from. It has his signature engraved on the back.
I swapped out my Black Cat knife for my Douk-Douk. I really like both of those knives.
And, my Visegrips and Sure Bilt mini ratchet.

-
Day 24 Part 2 - Christmas Eve edition
In case anyone was wondering how I got on with my Christmas baking, which I posted about a couple of days ago, here is the finished cake:

I did the chocolate glaze earlier today and we sampled it. If I say so myself, it is one hell of a cake. This has more to do with the recipe than any particular skill on my part. It has chocolate, figs, honey, brandy, orange, hazelnuts, ginger and various spices in it. This sounds like too much, but it works.
No tools in that shot, I hear you object. OK, here I am getting into a tin of Christmas goodies:

-
@nate j said:
I don’t believe we have seen a Christy Knife in this challenge yet. Perhaps some of our friends have never seen one.It's been a while since I've seen one...if ever!

@LoopCutter said:
Work knifeAnd Norman Rockwell?

@fullbreakfast said:
I didn’t count, clean, measure and label them.That sounds like something I'd do.
@WECSOG said:
I swapped out my Black Cat knife for my Douk-Douk.Lots of good stuff in that photo!

Day 24
Another machinist's rule, this one bearing a logo.
[attach id=0 msg=2557095]
It is graduates in whole and half millimeters. No big deal.
[attach id=1 msg=2557095]
But it's extremely rare that I measure down to 10ths or 50ths of an inch.
[attach id=2 msg=2557095]
.jpg)
.jpg)
.jpg)
-
Day 24
At Daughter’s for Christmas Eve and morning.
Being spoiled, good food!
[attach id=0 msg=2557097]
Case 75 is my tool of choiceFrom her yard
[attach id=1 msg=2557097]
At Sunset…

-
I'm happy for you. Best wishes. Gary

-
Thank you, has been a new tradition since I have been solo. Oldest daughter claim me for Christmas and since she lives opposite side of county not practical to drive back and forth.
Boys being first responders, usually one works every Eve day as nd other on Christmas Day. Other daughter visits in-laws in Ohio. Nobody fighting over dad.
I hope you and awl others that are part of MTo have a joyous holiday or get to hug their loved ones.
-
Dad taught me to hold on to usable hardware. I also learned how to hammer out nails so they can be reused. While I haven't hammered out nails since I was a kid, I keep my assortment of bolts, screws, washers, and nuts in an assortment of containers ranging from large plastic containers, to bean dip containers, old ham containers, and an odd heavy duty zip-loc bag. I should really consider standardizing everything to maybe mayonnaise jars.

@fullbreakfast - That cake looks and sounds delicious!
@LoopCutter- That's a beautiful sunset. Always good to spend it with family.
<u>Day 23- catch up</u>
Used both my Buck and Amazon special to cut down these boxes for recycling.
-
<u>Day 24</u>
We were busy the whole day between cleaning house, going to service, and cooking up a storm. Here's a glamour shot of my flashlights in rotation, that I never post a picture of even though I use them so much.

This was my pocket carry for today. Going to add my stubby and Wilde pliers for Christmas day just to be safe.
-
Day 25 and Merry Christmas!
Led Lenser M7R

-
Day 25
I was waiting outside of the public library one day when a nutjob came up to me and started talking. He called my attention to the contrails of planes overhead. "See all those Xs overhead? That's where they are Xing us out by spraying everyone with chemicals." Guy was 40 maybe. Clean white shirt. Overweight. Well groomed. Sort of fellow you would find managing an office somewhere. Accountant maybe. I felt a little like talking in a metallic monotone and informing him it was my people from the planet Dewlap doing this, but decided that wrestling with this brainless blob outside the public library would gain nothing. He went on with some brainless blah blah blah, but by then I had turned off the storage units in my brain. Got to keep out as much crapola as you can. I don't know which way he went in the library, but I made sure he wasn't near me. I'm allergic to stoopid. It makes me giggle. I left out a can of tuna and some Pepperidge Farms bagged stuffing for the vermin. I might look around outside later to see if one of Santa's drones left something. If it was anything edible, it's already gone. I didn't buy food yestiddy, so I will cut this short and make some biscuits (scones) for breakfast. Probably split them open and put in some scrambled egg and cheese. Maybe a little ham. Yummers.Best wishes. G
:D [attach id=0 msg=2557128]
-
Day 25

Merry Christmas one and all!

I think that damn squirrel is after my knife. Christmas spirit only goes so far you little varmint!
-
I wanted to give everyone a nice infrared photo of a raccoon having its early Christmas dinner of tuna, but I couldn't find any batteries on sale locally. Fortunately I will be able to supply an artist's impression of the same. Best wishes. G

[attach id=0 msg=2557149]
-
Day 25
M E R R Y
C H R I S T M A S
T O A W LReceived a gift from my daughter’s family, a new rucksack, for excursions through airports or whatever adventures I can imagine.
[attach id=0 msg=2557150]

-
I like the color of your new rucksack. I have been having connection problems here for a few days. I get a signal that MTO refuses to connect, then the connection usually goes through anyway in a few seconds. Also had to reset a circuit breaker. It let my compooter starve for electricity and it took some head scratching to figure it out.
It is a very un-Christmas like 70F degrees here. Might be a couple of degrees shy. I was bombarded by a wasp yestiddy. I will shut this down and take a walk. I haven't checked the mail for several days. Might be some new, interesting bills or pleas for money. Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



