December 2025 Tool Box Challenge
-
Day 27
The World's Sharpest Knife.

- YouTube
Auf YouTube findest du die angesagtesten Videos und Tracks. Außerdem kannst du eigene Inhalte hochladen und mit Freunden oder gleich der ganzen Welt teilen.
(www.youtube.com)


-
My Christmas carry was the Gits-Knife refillable razor knife from the '50s.
It takes a single-edge razor blade without the metal tab on the top. I finally found some at Lowe's by Olfa marked as "glass scraper" blades. They are INSANELY sharp and a good fit for these old box cutters that take razor blades (they were marketed as a way to use blades no longer sharp enough to shave with back in the day--I think most razor manufacturers had a version).
[attach id=0 msg=2557319]
I've never seen one of those! Cool!

-
-
-
Day 27
I'm down to the Buck trapper and an occasional Opinel carry. I like the little Buck a lot. I compared the length to a 84mm SAK or maybe it was a 91? I forget. I might keep carrying it once the challenge is over. Or switch back and forth with an Opi.
Probably a couple more days of unseasonably warm weather, then back in the ice bucket. I dreamed one of the guys on the EDC podcast was a werewolf and ate some gal. If you have seen the guys on the videos, a werewolf isn't much of a stretch. Yes, I did watch a goofy werewolf movie before I cashed in last night.
The yellow thing in the photo is a stubby screwdriver. No name brand, but an interesting shape. The thing that looks like a Buck is a Buck. Best wishes. G
:ahhh
[attach id=0 msg=2557343]
-
Day 26 (late)
Mini-challenge, Hero and Zero

I have a very capable screw driving set up here but l did not use it much, except for taking 30-odd screws out of an old cupboard the other day. That was enjoyable, and showed the kit was as handy as I thought it would be. So why did it not get used more? Two reasons. First, it added a lot of weight to my EDC pouch, so I put it in a separate pouch to be carried in a different pocket. I usually forgot to carry it. Second, I did a lot of screwdriving jobs this month, but they were mostly the kind where I wanted my proper tool bag (building and taking apart furniture, putting up shelves). So I used the big boy screwdrivers kept therein.
The little pry bar came in useful a lot more than expected. This is the first time I have carried a pry tool other than the SAK opener layer for many years. I found that I used it for most of the prying I would have done with a SAK, but also for several things I would not have used my SAK for - because they required a lot of leverage that might have damaged a SAK, needed the curvature of the pry bar, or just were dirty jobs. I have washed soil out of a lot of SAKs over the years, but I prefer to avoid it if possible.
I’m thinking of adding the pry bar to my regular carry.
-
Day 27
I built Smashrador, with its 119 plastic pieces.

It nearly killed me, but I did it.

The pry bar helped when I made mistakes and had to prise apart bits I had snapped together.
-
What are the things that look like cabbages? Best wishes. G

-
@IMR4198 said:
What are the things that look like cabbages? Best wishes. G

They are projectiles to be hurled using a kind of trebuchet (not in picture). They are green because they belong to the Jungle World, one of the warring nations of Eldrador. But they do resemble cabbages!
Perhaps they are in fact cabbages. A giant cabbage striking with sufficient force could be an effective weapon.
-
@nate j said:
Case Seahorse Whitter - It’s a brilliant design for whittling, but not ideal as a general utility pocket knife, so I don’t carry it much.Duly noted. That observation, coupled with your strong sense of objectivity, make me glad I have yet to buy a Seahorse Whittler.
@cody6268 said:
The Kleins aren't as sharp and don't feel great in the hand, yet are more than 3 times as expensive. I don't get it.Maybe it has something to do with Klein being a more recognizable (to me, anyway) name. That's the only explanation I can come up with.
@AzteCypher said:
I wonder, has anyone done a red and green only challenge during the month of December?Not that I'm aware of. Maybe we should!
@IMR4198 said:
The yellow thing in the photo is a stubby screwdriver. No name brand, but an interesting shape.I don't recall having seen such a shape on a screwdriver. Is that a good or a bad design?
@fullbreakfast said:
I built Smashrador, with its 119 plastic pieces.How long did that take?
Day 27
Nate's excellent mini-challenge stipulated bonus points for homemeade tools. My one homemade (actually shop-made) tool is neither red nor green, and I haven't used in in nearly a decade and a half, so it wouldn't have qualified. But I thought it may be of interest. It's a go/no-go gauge used to check if a solid-shank rivet is properly bucked, and it's made from sheet aluminum.
[attach id=0 msg=2557369]
I also remembered to put the P-38 to use.
[attach id=1 msg=2557369]
The reduced leverage is offset by how smoothly it cuts. I put it on an even keel with the P-51 that's in the kitchen.
[attach id=2 msg=2557369]
.jpg)
.jpg)
.jpg)
-
Farmer X:
I don't recall having seen such a shape on a screwdriver. Is that a good or a bad design?It is okay for using and has one unexpected benefit. It won't roll away. It sits on its bottom very well and if it gets tipped over it rolls in a circle. I don't remember seeing another like it. Best wishes. G
-
About four hours!
It would have been quicker, but my son who I was building it for (who is six) couldn’t wait for me to start and had got into the box and the packets inside it. Quite a bit of time was spent searching for parts that had been dropped in various rooms of the house.
-
Day 27
I was working on a project of building in an additional support under a shed I built. So I had my little 6 inch cordless chainsaw to cut a 4x4 to the needed length, and while I had the saw out I cut a few pieces of stove wood from some downed, small trees. The support consists of a 4x4 set in a couple of stacked cement blocks with rebar driven into the ground beneath. I needed to mix some concrete to pour in the blocks, and was using a small bucket so a shovel would be too big to mix it. So I used the saw to cut a mixing tool from a green stick. The stick had several little branchlings growing out of it, and I was thinking about going in the house and getting either a tomahawk or fixed blade knife. But since the branchlings were so small and there were only a few of them, I decided to just use my Douk-Douk which was in my pocket. It did the job just fine.

-
Day 27
[attach id=0 msg=2557381]
My pocket carry so far this quiet Saturday!
I had hoped to visit my grandson, his birthday, but COVID has been confirmed at the house. So off limits to me.
Actually COVID has taken hold three of the four kids household in the past week. So you awl take care.

-
Great job by awl with the 12/26 mini challenge!
-
Day 15
I was "out of the office" for a few days,and I have more catching up to do.My First decent light was the 4D Maglight,got it in 92 probably,and a fiend gifted me the Solitaire a fey years after.
I plan on upgrading the 4D to LED [I've been planning on doing that for years] ::)
[attach id=0 msg=2557411]Day 16
In 95 I got the Minimag,and the Rausch "Aviator". Derek wasn't make sheaths then,so i had the local sheathmaker [who used to make sheaths for Chris Reeve] make me a sheath for the Rausch and Minimag. I EDC'd this combo for a few years.
[attach id=1 msg=2557411]Day 17
The Surefire E2EHA was my first Surefire,got that in maybe 03.
[attach id=2 msg=2557411]


-
@fullbreakfast said:
I’m thinking of adding the pry bar to my regular carry.If you’re getting one for regular carry outside this challenge, something like a PWII, Griffin, etc. might be a good option. Still plenty capable at prying, but with some additional useful functions.
My PWII is going back in my wallet as soon as this challenge is over.
-
Day 18
I eventually entered the LED era with the Surefire L2 Lumamax,probably 05 or 06,rock solid light that's been with me ever since [I'll upgrade to the current similar model at some point].
I bush-mechanicked a Titanium clip when the replacement broke [ the original broke,Surefire sent me a replacement,that broke too,in normal everyday use].
[attach id=0 msg=2557413]Day 19
I've been carrying this pin since it's been needed to change cell phone sim cards,and I needed to install a sim on my wife's phone/
[attach id=1 msg=2557413]

-
@Farmer X said:
Duly noted. That observation, coupled with your strong sense of objectivity, make me glad I have yet to buy a Seahorse Whittler.
Part of my reason for saying this is that I strongly prefer a pocket knife have at least one “main” blade that is about as long as can reasonably be fit into the handle.
If someone were looking for a Case knife for general pocket carry and use, I’d probably recommend looking at the Stockman. Case makes such a wide range of sizes and patterns, from the diminutive 2 5/8” small Stockman (disappears in any pocket, and blades are short enough to meet even the most draconian blade length restrictions) up to the 4 1/4” large Stockman (big enough to do some real work). And with three different blades, one has options to pick the best one for the task at hand, keep “clean” vs. “dirty” blades, etc.
-
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login





