December 2025 Tool Box Challenge
-
Looking at the pictures, I realised there are a couple of things missing that are supposed to be in there. So I found them and popped them in. Bonus!
-
That is a very nice tool tool/kit. And you have it stocked very nicely, fullbreakfast!

-
Day 28
Cold Steel SRK (San Mai version)
A decent knife for the price, IMO

-
@Farmer X said:
That's a good example of how my tastes have changed in quite a short time. These days, I prefer knives single blades, or maybe two. Three blades in one knife is a little much for me anymore...though there are exceptions to that rule.Case Moose is good, maybe even better than the Large Stockman IMO, but not currently in production.
Of course, if you don’t find the size and weight objectionable, the large Folding Hunter (one- or two-blade version) will handle anything that might reasonably asked of a folding knife.
-
The CASE ‘75 Stockman and the Moose share the same pattern frame, the MOOSE was also a 75!
Buck also produced the Stockman 301 model with only two blades, a Clip Point and a Wharncliffe. Both were sold under the Buck of the Month banner.
Most Stockmans, even though they have 3 blades are actually two layers. The Spey and Wharncliff sharing the same backspring. My CASE ‘75 is such a model.
Buck was one of first manufactures that made with third backspring, one for each blade.
The two blade trappers by CASE are popular. Especially those that install the Wharncliff in place of the Spey blade. Or, there slim models with just one blade.
The Muskrat pattern is appearing on occasion, two identical opposing blades in a ‘47 pattern, the MOOSE may not be far behind.
-
I wonder what the memorable members of the Toolbox challenge will be quick to put away once the term is finished? A better question might be what will be the first thing they reach for that has been neglected for a month? HmmmmBest wishes, Gary
I'll probably resume carrying my Swisschamp. Until this month, I had been carrying it everyday except Sunday since I bought it in October 2021.
I have discovered through this exercise that a small Visegrips is a great edc tool. I already knew that Visegrips were very useful tools; don't know why it never occurred to me to edc one. I probably won't be too quick to put it down. -
Day 29 mini challenge

-
@IMR4198 said:
I wonder what the memorable members of the Toolbox challenge will be quick to put away once the term is finished? A better question might be what will be the first thing they reach for that has been neglected for a month?I think the only things I’m carrying that will quickly be put away after the challenge are the Vic Companion X Alox and the Klein multi-bit precision screwdriver. Both are good tools for what they are, but not the most efficient options to carry…
My Vic Rambler will definitely be rejoining my EDC. It can cover most of what the aforementioned two tools can do, and then some. It might move from keychain to pocket carry, though.
My PWII will go back in my wallet. I haven’t missed it too much over the past month, but it’s pretty unobtrusive to carry. And when it is needed, I don’t usually have a ready substitute.
Various other mostly 91mm & 93mm SAKs will be carried some and also used around the house.
P-51 replacing the Vic Alox Bantam in my wallet is likely to be permanent. The main point of the Bantam was always to have a can opener, and the P-51 is just objectively better for that task.
-
@WECSOG said:
I have a brand new $50 Amazon gift card and the '08 Soldier is in stock for $50. I think it might be a sign.I would tend to agree.
@AzteCypher said:
I don't think I've ever used pliers to undo a knot.I haven't, but I did use a back layer SAK awl for that purpose at least once.
@IMR4198 said:
I wonder what the memorable members of the Toolbox challenge will be quick to put away once the term is finished? A better question might be what will be the first thing they reach for that has been neglected for a month?I probably won't put anything away in the sense of not carrying it. Most of the items I've shown are used only at home, on an as-and-when-needed basis. However, I am itching to get back to the USCK and the ST300.
@LoopCutter said:
I had planned to picture my other convenient tool chests, but that requires relocating my SUV from the garage. Not happening with the 40mph winds and temps at 16° F and dropping. I am staying inside🤪I don't blame you one bit!
@fullbreakfast said:
I'm going to show the contents of my small tool bag, which is the one I most use.The green pliers are pretty cool! Are they Engineers?
@nate j said:
If you don’t find the size and weight objectionable, the large Folding Hunter (one- or two-blade version) will handle anything that might reasonably asked of a folding knife.I have no issues with the size or weight...it's the prices some of them carry that give me pause. The Muskrat is another one I'd like to have, if I'm able to locate one with CS or (better yet) CV blades.
Day 29
Tool storage system mini-challengeI had planned on showing this on Day 30, but the proclamation of the mini-challenge pushed it forward a day. Given my bckground, it may surprise some to hear that the only toolbox I own is actually a tackle box. I think almost all of the qualifying tools have been seen in the challenge.
[attach id=0 msg=2557567]
[attach id=1 msg=2557567]
Since we were under a high wind warning, I also took the time to put the battery in my laptop. That required the General 744 4-in-1 Mini. The photo shows the screws being tightened after the battery fully charged and removed once again.
[attach id=2 msg=2557567]
And here's the 744 with the laptop, back on "shore power."
[attach id=3 msg=2557567]
.jpg)
.jpg)
.jpg)
.jpg)
-
**What will I be quick to put away once the challenge is finished? **

I'll put my stubby, my P38, the scissors, and the tweezers away before I start carrying my Super Tinker again as the Super Tinker has all that. The stubby was not as obtrusive as I thought it might be. I very rarely felt it in my pocket.
The P38 did manage to poke me every now and then but nothing a small rubber band couldn't take care of.
What I think I'll keep around a bit longer are the small Wilde pliers. I didn't use them often but when I needed them, they came in handy and are very unobtrusive. They felt more useful than what comes standard on the Vics. I don't use them often enough to warrant picking up some Knipex though.
-
I'm really liking fullbreakfast's roll up tool bag. That seems very convenient to carry in the car vs the larger tool bags I tend to carry when we're heading out of town.
<u>Day 29</u>
The only tool bag I have at the ready is the one with two ropes, some bungee cords, and several ratchet straps. There was a point in time where I was helping friends move quite often hence this tool bag. It was just grab and go and I was ready to tie anything down.
My awesome wife bought me this Craftsman tool box several years ago when we finally bought our first house. It was bought from one of those Sears warehouse stores when they still existed.
The top most lid covers, all assortments of "stuff". The first drawer houses my screwdrivers. The second drawers contains all my pliers. Third drawer contains mostly air tool accessories and my garage calipers. Fourth drawer contains my wrenches, and the fifth drawer contains my sockets and socket wrenches.
-
Dan's tackle box is a close cousin to the plier box I showed. Same sort of thing with the dividers removed. I don't remember where I got mine. The little pliers are really easy tools to carry. I carried mine many times this past month, but not enough outside activity to actually need them. Looks like the folding military can openers are being appreciated for their size and utility. I have one but didn't carry it this month.
Lots of high winds today. I will have to go check for downed trees tomorrow. It would have been dangerous all the while the winds were whipping. They died down after dark. No sense in worrying before I have to. At least the electricity stayed on.
I have a bag of black-eyed peas and some canned greens for New Year's Day. The peas are usually cooked with smoked pork jowls. That I don't have. Peas are for good luck and the greens represent lots of money for the new year. I saw that black-eyed peas are fairly expensive this year. I already had some on hand. I thought I might buy a box of vanilla wafers. Then I saw the boxes had shrunk about 30 percent and cost $6.19 for two thirds of a box. These things were always inexpensive compared to other cookies. Generally used for making banana pudding. I don't know how much bananas cost now. I haven't bought any in some time. I hope they don't start chopping 30 percent of each banana off. The little fruit flies would have a party.
Best wishes. G
:ahhh -
Day 26:
Printed a ruler as I was too lazy to go upstairs and grab mine.
Next one will be color-flipped. I did NOT like the bleed-through on this one.
[attach id=0 msg=2557580]

-
Day 27:
Made a set of calipers as I misplaced my cheap Harbor Freight pair.
It seems to be pretty accurate, but I prefer the two-dollar Pittsburgh one, as the latter is smooth--this one sticks. Thus, a few of those Pittsburgh ones are slated for next week's Harbor Freight trip.
[attach id=0 msg=2557581]

-
Day 28:
Finally bought the Member's Mark mini toolbox and as I have been doing with most of my collection of mini toolboxes--it's getting the Gridfinity treatment.
[attach id=0 msg=2557583]
Found a bin just for the two 125mm Knipex pliers--which cost me a fair bit of money tool-wise and I keep losing one or both of them. Thus, they now have a dedicated spot.
The Cobras are almost ten years old and have seen tons of use (bought them right after a buddy of mine showed me his old pair of Alligators), while the Pliers Wrench looks almost new as it's not even a year old.
[attach id=1 msg=2557583]


-
@Farmer X said:
I have no issues with the size or weight...it's the prices some of them carry that give me pause. The Muskrat is another one I'd like to have, if I'm able to locate one with CS or (better yet) CV blades.I suppose they were never inexpensive, and some are now downright salty. Looks you could still have your choice of a new Folding Hunter or Muskrat for about $80, if you aren’t picky about handle material.
Another option is to keep an eye on the ‘bay for a used one. There’s definitely a sweet spot there for decent users; if condition is too good, collectors will bid up the price, but of course you don’t want something that is beat and sharpened to smurf.
-
Day 30!

I have been meaning to show some of my utility knives, so here they are. My favorite is the Stanley 10-049. I don't know if they even make it anymore; I need to get some more blades while they can still be had.
The meter is a Fluke 75 that I've had for a lot of years.
The flashlight is a French-made TL122D. Lots of countries made and used the TL122 besides the US, including England, France and Belgium. I've had a couple of US made ones including at least one plastic one just like this and IIRC one of the green-painted brass ones. Wish I still had that one.
The watch is a Casio SGW100B that I've had for several years. I consider this to be an "almost" G-Shock because it has several features typically found on G_Shocks including a mineral glass lens and 200 Meters water resistance.
Someone asked to see my old Case Trapper. I apologize for not showing it; it's buried somewhere in my safe. Next time I reorganize the safe I'll try to take a pic of it and post it up.

-
Day 30
This is it. Pay day. Line up at the window. I might as well show a link to the award. It is on page 5 of the awards in case you want to do it the old-fashioned way. https://forum.multitool.org/index.php?action=profile;area=requestAwards;a_id=202 I might get a Leatherman or two out tomorrow and see that they aren't getting rusty. Probably keep carrying an Opinel of some sort or maybe the little Buck trapper. Tomorrow, I will fish out my Bijou from a drawer and use it to fix my nails just like before. When it warms up some, I need to walk down my driveway and see if something needs dragged out of the way or sawed up. It's possible that I might see some of you on another challenge one day. Until then: best wishes as always. Gary (IMR)
[attach id=0 msg=2557600]
-
@WECSOG said:
My favorite is the Stanley 10-049. I don't know if they even make it anymore; I need to get some more blades while they can still be had.They sure do!
STANLEY® Tools Official Site | All Build, No Bull™
For more than 100 years, STANLEY® Tools has been a trusted leader by pros in delivering high-quality hand tools and storage solutions recognized globally.
(www.stanleytools.com)
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

