Black-Out EDC Challenge - January 2026
-
@LoopCutter said:
Day 2I learned much yesterday! That this challenge is more about BLACK, not black oxide

So I then gathered up more just BLACK items last night and then sorted out three items that are special to me,
I like that Utica knife!
Day 2
Lumintop Tool 2.0
Utica spear point jack
no-fuel electronic lighter
-
Day 2:
Totally didn't remember my phone is black...
Kyocera Dura XA Equip. Added the Schrade Endeavor to the mix. It's basically a 91mm version of the apprentice made by Adler in Germany.
Photo taken with a 20 year old Kodak. Fun fact--it's so old, the internal calendar only goes up to Dec. 31 2025. Luckily, I last changed the battery on Dec. 31. Still in the market for a modern digital camera--thinking a Pentax Tough series.
[attach id=0 msg=2558035]

-
Agree, that ol' Utica is a beaut.
-
^ Thank you.
-
@Farmer X said:
I'm starting to see the benefits of atomic timekeeping. Perhaps one day I'll own a G-Shock with that capability.I have a Citizen solar PCAT (Perpetual Calendar Atomic Timekeeping). It’s very handy. Pretty much as long as you make sure it gets enough sunlight to keep running (and you can receive the time signals), the date and time will always be spot on.
I don’t have it with me ATM, but I’ll be sure it makes an appearance in this challenge.
-
I have this CITIZEN SKY HAWK, I know I depends on a radio signal to sync time and adjust time zones.
Is this the same as ATOMIC (PCAT) Time keeping.? I quess I never paid close attention. Just knows it has worked across time zones and DST CHANGES without issues.
[attach id=0 msg=2558049]
Maybe that is what AT, stands for on the center logo, ATOMIC TIME, duh…

-
Day 2, part 2.
Swapped to my "around the house pants" and grabbed the Civivi Baby Banter. I bought a new PC desk at Walmart today and had to slice open a ton of bags of hardware.
I grabbed a Western Crosstrail (basically a really bad knockoff of a Sharpfinger that related by name and the Acme buyout of the defunct Camillus to the original company). Camillus made a Sharpfinger (which I'm willing to bet was Schrade sourced), but I don't think Western ever did.
Also, a cheap "strap cutter" automatic I bought cheap off Amazon.
[attach id=0 msg=2558083]

-
Mini Challenge: January 5
Post a picture of one black item with a blade, and one without, e.g. knife and torch, or MT and pliers, etc.
PM me if you want to book a date and host a Mini Challenge. Dates: 10th, 15th, 20th, 25th, 30th.
-
@WECSOG said:
When I was in electronics school in the Navy, Blackout was one of two albums I listened to awlmost daily.A fellow Sailor!
That makes three U.S. Navy veterans in this challenge.@Sos24 said:
Ruike 31 opened some sliced chorizo to eat with some cheese
I recently had chorizo con huevos at a little taquiera in Mexicantown, Detroit. It was one of the best things I've ever eaten.@ReamerPunch said:
SOG PowerPint.
@LoopCutter said:
I then gathered up more just BLACK items last night and then sorted out three items that are special to me,Those Uticas are sweet! I have a similar Imperial that'll show up during the course of the challenge.
@cody6268 said:
I bought a new PC desk at Walmart today and had to slice open a ton of bags of hardware.I don't doubt that for a nanosecond. My computer desk (which has a hutch) and bookcase had a smurfload of fasteners each.
Day 2
Here's a lightweight, fairly slim lockback: the Schrade SP2. Though they haven't been made in the States since 2004, I believe you can still find them at relatively modest prices. And they're decent knives for the price.
[attach id=0 msg=2558096]

-
Day 2
Confirmed that the end of the file on the Switch Plier is a working flathead driver. Unfortunately, the screw holes were too stripped out to tighten this loose railing.

-
Day 3
WorkPro mini pliers

-
@LoopCutter said:
Day 2I learned much yesterday! That this challenge is more about BLACK, not black oxide

So I then gathered up more just BLACK items last night and then sorted out three items that are special to me,
quote author=WECSOG link=topic=94445.msg2558034#msg2558034 date=1767373286]
I like that Utica knife!Day 2
Lumintop Tool 2.0
Utica spear point jack
no-fuel electronic lighter
[/quote]I love seeing old Utica Knives. I grew up outside Utica and my first knife was a Utica Girl Scout knife
@Antti Lammi said:
Day 2 of 30Today MXBS helped opening letters
[attach id=0 msg=2558007]
Knice. i have a Spirit MXBS that will make a showing at some point.
-
Day 2
The S31 opened a calendar. I meant to do it yesterday, but forgot.
-
@LoopCutter said:
I have this CITIZEN SKY HAWK, I know I depends on a radio signal to sync time and adjust time zones.Is this the same as ATOMIC (PCAT) Time keeping.? I quess I never paid close attention. Just knows it has worked across time zones and DST CHANGES without issues.
[attach id=0 msg=2558049]
Maybe that is what AT, stands for on the center logo, ATOMIC TIME, duh…
Yes. It receives a longwave radio time signal from the atomic clock at Fort Collins, Colorado. The longwave (60 KHz) transmitter carries the callsign WWVB. There are also shortwave transmitters on 2.5, 5, 10, 15, 20 and 25 MHz. You can actually listen to those to set your clocks that don't have WWVB receivers. And, you can use them to calibrate the frequency of shortwave radios, as well as to determine band conditions by stepping through each of the WWV frequencies to find which one is strongest. For example, for a given location 20 MHz might be the strongest signal at noon, dropping to 10 MHz at 6 PM and 5 MHz at midnight.
-
Day 3
This is the control head of my Yaesu FT-891 HF (shortwave) transceiver, propped up on a Camillus TL-29 electrician's knife.

-
-
Day 3
Yesterday I had to venture out after dark in search of supplies. We had run out of milk.
I took a shortcut through the badlands:

Returning with my swag via the side gate. That frost hasn’t shifted from the lawn in five days:

The torch that lit my way for this mission was the Sofirn IF23:

A good value light, quite powerful and with a useful feature set. I didn’t need more than the low mode for my trip.
-
@nate j said:

Pretty much the only thing that has to be set manually on these watches is which time zone you are in/want displayed, since these watches don’t have any way to determine that automatically.
The more modern G-Shock modules can sync time with your phone via Bluetooth as well as pick up the atomic clock radio signals. So when I travel abroad my watch will pick up local time from my phone within an hour or two of landing and my phone connecting to a network. I have literally never had to set the time on it.
I guess you are probably aware of this, but the info may be useful to some.
-
Day 3 of 30
Today some more letter opening but with Civivi
[attach id=0 msg=2558131]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login