December 2025 Tool Box Challenge
-
@King_Gorilla said:
Day 29:I was excited to buy this streamlight Protac flashlight because it can use regular batteries and the rechargeable LI batteries, but it flickers on and off too much. frustrating.
That’s disappointing. Some folks seem to like them, but I’ve had some bad experience with Streamlight and can’t recommend them.
-
@nate j said:
That’s disappointing. Some folks seem to like them, but I’ve had some bad experience with Streamlight and can’t recommend them.I absolutely Love the Steamlight Micro stream. It's the 1 cell AAA light. I carry it almost every day and I have a brand new one still in the package waiting for the day that I inevitably lose the one I carry. But this new one is different. I THINK (not sure) that it has to do with the adjustable battery thing inside.

-
@King_Gorilla said:
Too late for the badge...You completed the challenge, so go ahead and request the badge. I like the Opinel from Day 30, too!

-
@Farmer X said:
Your driving siumlator rig has a clutch pedal!
Part of the reason I went ahead with the upgrade is my old one (Thrustmaster T128) did not--and I have been using it a little bit more than "casually" as it's designed for. I've also been looking a lot at some fairly cheap '80s and '90s (and occasionally older) cars with manual transmissions as a beater/project.
The Moza R3 is much nicer but A: I'd have to order it and B: I'd have to buy an extra clutch pedal and shifter--which would've made it more than $100 more than the G29 was. Plus, Walmart had the G29 right on the shelf. The force feedback and feel of the pedals and wheel are so much nicer (steel pedals and paddle shifters--plus a leather wrap on the wheel and shifter). Also, I really like the shifter.
Thinking about upgrading to a full-on rig with a seat (I've actually got a nice racing seat spare from a '48 CJ-3 I'm returning to stock after a crude crawler conversion by the previous owner); and mounting that on locking casters--as it's still awkward using a stand with a desk chair.
-
@cody6268 said:
I've also been looking a lot at some fairly cheap '80s and '90s (and occasionally older) cars with manual transmissions as a beater/project.That's a worthwhile undertaking. Sadly, my present living arrangement makes a project car impractical. I'd be very interested to see some of those you may have considered looking at!
-
@Farmer X said:
You completed the challenge, so go ahead and request the badge. I like the Opinel from Day 30, too!
Cool ... :ahhh
So I went to the page with all the badges to request it, but I don't see any that say "Tool Box Challenge" on it. Is there a different place to request badges that I don't know about?

-
It is labeled
Tool Box Challenge The icon is a pale green with a channel lock style plier
-
-
@AzteCypher said:
It's on page 5 down just a bit.I found it, thanks
-
Day 23
The tool roll from my truck [Toyota Hilux D/C SFA]
[attach id=0 msg=2558480]The tool box and tools that rides in my truck was given to me by my wife's aunt when her husband passed away
[attach id=1 msg=2558480]My "home toolbox" [as opposed to my shop toolbox] needs an upgrade,but I'm not sure what to get.
[attach id=2 msg=2558480]


-
Day 24
I switched to the Spydie [i forget the model]
[attach id=0 msg=2558481]Day 25
The Surefire G2Z MV is a bit too bright for daily use but it is in EDC rotation.
[attach id=1 msg=2558481]Day 26
My other mini shifting is a 6in Gedore. This stays in my "mini" tool kit
[attach id=2 msg=2558481]


-
I have lots of stuff that I picked up here and there. I was sorting through my screwdriver box before the challenge started and found several that I didn't remember. I picked a small Snap-On screwdriver to be a pocket carry. I carried it one day and saw I was going to have a hole in my pocket if I kept that up.
I carried a SAK for the first time since the challenge. I reached in a drawer and pulled out a battered old Eco-line Spartan. Both blades are bent from prying (someone else, not me) and put it in my pocket. I might just switch to a Leatherman for tomorrow. Best wishes. Gary

-
@Humayd A R Mahomedy said:
The tool roll from my truck [Toyota Hilux D/C SFA]Toyota dropped the Hilux name from American-market trucks back in the 1970s. I kinda wished they hadn't.
@IMR4198 said:
I carried a SAK for the first time since the challenge. I reached in a drawer and pulled out a battered old Eco-line Spartan. Both blades are bent from prying (someone else, not me) and put it in my pocket. I might just switch to a Leatherman for tomorrow.Why not?

-
I'm still carrying my 'Scrips (Visegrips). But I'm awlso carrying my Swisschamp again.

-
@Farmer X said:
Toyota dropped the Hilux name from American-market trucks back in the 1970s. I kinda wished they hadn't.
Why not?
How does the Tacoma compare to the Hilux?
I wish we could get the Tundra here.
There's a Toyota plant South of Durban,back in '97 maybe,Toyota displayed 1 of the Megacruisers at an agricultural show,I wondered if some R&D took place here.Day 27
Rulers [and verniers] are tools I use daily,a 150mm stays in my Griphook
[attach id=0 msg=2558911]Day 28
I needed to reinstall my truck battery and decided to use a high-quality nut-rounding tool.
It worked surprisingly well. I'm still getting the hang of using the Knipex but it's definitely not as efficient at rounding off nuts as a Leatherman or Swisstool
[attach id=1 msg=2558911]Day29
These were my tighten/pinch/drive solutions for this challenge
[attach id=2 msg=2558911]


-
Day 30
The most used tools,apart from lighters,were the scissors and flashlight. SAK for token representation :D
This brings me to the end of the challenge.the year was a doozy ::)
[attach id=0 msg=2558912]At the start of the challenge,i mis-titled the second post,as a result,i have 2 Day 2's and no Day 4 [I diicovered that after I could edit it].
The challenge was enjoyable,and interesting,and proved that I can survive without Multitools,but what's the point of life then? >:D
Thank you Gary,for being am excellent host

-
Badge awarded

-
Congratulations for completing the CHALLENGE and your new BADGE.
PERSEVERANCE is an excellent quality in which I find admirable

-
Endurance. That's what it takes, Humayd. That and determination. I will agree with you on the nut-rounding tools. I tried to use a Leatherman to change a battery. It didn't go well. Other tools were available. Never had a Knipex.
One of our friends who was on this challenge has decided to carry a small ViseGrip. Those things work well on something completely rounded off. I am not a huge fan of Leatherman pliers but will admit they are light years ahead of trying to do something with just your fingers. I think of plier based multis as tools of convenience or necessity. No proper tools readily available.
I am having some trouble adapting back to multi carry. Still haven't carried a Leatherman after the ToolBox challenge. Just a 4-layer battered Wenger or an Opinel so far. I did get out my SAKs and give them a wipe down.
I think this makes the completion for everyone who started the challenge. One of our friends had too many other things that needed attention and stopped posting early. I contacted that person and was happy to hear they were in good health along with the family. Thanks to all who made this a memorable challenge. Best wishes as always. Gary (IMR)

-
Thanks again for hosting Gary.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
