What did you use your Leatherman for today?
-
Cut copper nickle tig wire
-
Tig wire? As in a TIG welder?
-
I’m a pipe welder by trade. I snip the end of the tig wire after running a weld bead. Snipping the filler wire aids in cleaner restarts.
Tig welding (Gtaw) is the welding process. Tig wire is the filler metal. Copper nickle (CUNI) base material welds cleaner with filler wire (RN67) that doesn’t have oxides on the end of the filler wire.
Any base material type and filler wire welds a lot cleaner with snipped ends on initial restart of a weld bead. And also keeping the filler metal (tig wire) within the shielding gas (argon), is key to a quality weld. Especially on none ferrous materials.Hope I didn’t over explain. Lol
Or I completely insulted you because you already knew this stuff. Hope not.
-
-
Bathroom fan conked out. I bought a replacement to salvage the motor and fan from a new unit and used the Leatherman rev I got for free from attending a webinar to grip the housing during the install and the Phillips.
Though I think in the future I'll be more patient and just order the same model and just replace the motor and plate as 1 unit. Easier and less wasteful as I threw away the new parts I didn't need like the housing.
-
Vacuum was being dodgy and making strange noises yesterday. Inspected the belt and cleaned the roller. Still dodgy after sadly, but the Free T2 did its part.

-
Used the file on the arc to "sharpen" the plastic ice scraper I use on my windshield whenever I forget to cover it for the night. Seems like in some point it met the ground so it was a bit serrated :D . Worked great, no pic as I'm trying to limit my screen time so I don't carry the smartphone currently.
-
Today tightened screws on bathroom door handle and my daughter room door handle, both of those were quite loose.
[attach id=0 msg=2556416]

-
That's something I do pretty regularly. The pulls on the closet doors and dresser drawers are seemingly constantly shaking themselves loose.
-
I used the pliers on my Rebar to pick up a random band aid off the bathroom floor to put in the trash today.
-
Black(out) coffee ☕️
[attach id=0 msg=2560463]

-
Rebar on pencil duty this afternoon

-
Today tightened few handles on cabinet doors with K502X
[attach id=0 msg=2560896]

-
used to strip an electrical cable, for a project that I hope to show you later.
[attach id=0 msg=2562173]
Yes, you're right, the blade is broken. But this thing is still sharpenned as f*ck, I could split my finger easily with it !
Poor PST, injured but still at work...
I think this is my favorite; we have something in common ;)

-
Ah ah ah

Shouldn't have wrote that ! That thing juste cuted my finger, just like the cat scratches you while you're petting it :D
Edit : warning, a little bit of blood (not so much, don't worry. I wiped it ;) ).
Spoiler:
[attach id=0 msg=2562177]

-
Lol, you tempted fate.
-
Shouldn't have wrote that ! That thing juste cuted my finger, just like the cat scratches you while you're petting it :D
Edit : warning, a little bit of blood (not so much, don't worry. I wiped it ;) ).
Spoiler:
[attach id=0 msg=2562177]
Well, you DID brake off the tip of it's blade…
-
:D
It came like that

I wanted to use it for cannibalistic purpose, but this thing is litterally a razor !
I'm in love with it

It's actually in my pocket :D
-
Today Surge helped me to tighten cabinet door handle
[attach id=0 msg=2562739]

-
Knifeless Fuse helping out in an attempt to fix my beard trimmer (spoiler alert; had to be replaced). [attach id=0 msg=2563146]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login

