ARC Owners Club
-
Well it's early days but so far i'm loving the Arc, my initial fear of it being wobbly/flimsy, etc were totally unfounded.
So far i've only used it for cutting open/dismantling a few boxes and this weekend I installed a new ceiling light in my eldest's bedroom and I set myself the challenge of only using the Arc, no other tools. It performed excellently, using a couple of the bit drivers, wire cutters, 'hammer' edge and pliers without multiple trips to my workshop as I forgot something (as usually happens)!!
-
Awesome news - I'm glad you like it

Your concern was a valid one - I have even seen several reviews claiming the ARC is flimsy, and I guess I can see how someone might think that before using the tool. The "Free technology" that makes the ARC so nice feels so much different than other tools. As you have just experienced yourself, it's far from flimsy. In fact, Leatherman even claimed that the ARC was strongest full-size pliers they have ever made.

-
@NeatBeard said:
Well it's early days but so far i'm loving the Arc, my initial fear of it being wobbly/flimsy, etc were totally unfounded.So far i've only used it for cutting open/dismantling a few boxes and this weekend I installed a new ceiling light in my eldest's bedroom and I set myself the challenge of only using the Arc, no other tools. It performed excellently, using a couple of the bit drivers, wire cutters, 'hammer' edge and pliers without multiple trips to my workshop as I forgot something (as usually happens)!!
Great project and a great way to test and break-in your ARC! So glad it is working out well for you so far !
-
Leatherman ARC and friends.
[attach id=0 msg=2553607]

-
Some of you MTO Legends need to do an ARC/Free Challenge.

JonesE and I have already done one - though no badge yet exists. :ahhh

-
New club member


-
Great ARC pics Sven and Adam

Congrats on getting one as well, Adam

-
Welcome to the club, Adam

-
I joined the party and I am very happy.


-

Looks great! Looks like you got the next-gen cutters without the gap between the blades in tbe hard-wire section.

-
Congrats campus
Great pic as well

-
Welcome to the club, Campus

-
**Happy New Year folks!! **
Seems like a while ago now though... Hope you're all doing well.Thought i'd post an update on some goodies that my boys bought me for Christmas to accompany my Arc (that I treated myself to a couple of months back).
This my now my UK EDC set up sorted, got an Olight i3T 2 EOS torch that goes in the larger, elasticated, side pocket of the sheath, a bit extender in the other side pocket and a Galvanox double-sided 42x piece bit kit in the back pocket of the sheath.
I now keep the original Leatherman (part) bit kit as a spare incase I loose any of the others. Still carrying it daily, using it and loving it.
As you were.

-
Excellent accessories
How is the bits compared to the LM version ones?

-
@Poncho65 said:
Excellent accessories
How is the bits compared to the LM version ones?

Cheers.
The Galvanox ones are a prefect fit and are harder. Now this may or mayn't be a good thing. Means they won't get chewed up as much but then more stress will be transferred to the Arc so time will tell I guess...?
-
So it is possible that they would break instead of getting chewed up
that might be a good trade off though
thanks for the feedback 
-
Probably asked this before, just cannot find it in the search engine.
Quite some time back I broke the Awl on my Garage #5. And while I could send it back the Leatherman for a fix, have been either low of the flow or just don't want to send it in. Looked on Ebay for an Awl, and the Arc Awls have come down in price. So.. the question beckons, will the Arc's Awl fit into a Garage #5?
Are there very thin washers in between the Awl? Cause it would be cheaper to just order the part and swap it out and be done with it, even if it did not have the oval thread hole.
Otherwise to send to Leatherman I would have to remove all the custom parts and enhancements, then try to reassemble all that when it comes back. Don't get to carry it that much, but I really do cherish this bugger. -- Cannot carry anything with a blade at work, so been using the Roxon Flex. Yet, weather forecasts keep teasing us with 50° F weather and I really want to get out and ride again. Want my white handled friend to come with me. :)
-
Got an Arc awl in and it fits, although it seems shorter than the original with the thread loop...
Used a Roxon bit in a vise, and a torx fold-up to get it open. Was rather easy. Used the barrel of the torx bit to line the tool implements up and slid the bolt through, then screwed it back together. Adjusted the tightness.
So... while I do have the awl back, is there another Free tool that has a thread loop? Are the parts interchangeable?
Edit: Found two small drivers with an awl that were reasonably priced. Some "tactical" site wanted $89 for an awl with two bits.
People extorting others is stupid.Are the Free Series tools obsolete now or something? I better check. Free P4 is retired. Found one on Ebay that was TSA confiscated. :D
-
@Outback in Idaho said:
Got an Arc awl in and it fits, although it seems shorter than the original with the thread loop...Used a Roxon bit in a vise, and a torx fold-up to get it open. Was rather easy. Used the barrel of the torx bit to line the tool implements up and slid the bolt through, then screwed it back together. Adjusted the tightness.
So... while I do have the awl back, is there another Free tool that has a thread loop? Are the parts interchangeable?
Edit: Found two small drivers with an awl that were reasonably priced. Some "tactical" site wanted $89 for an awl with two bits.
People extorting others is stupid.Are the Free Series tools obsolete now or something? I better check. Free P4 is retired. Found one on Ebay that was TSA confiscated. :D
I think the Free series is discontinued, I can't find them for sale anywhere.
Makes me feel really foolish for selling my P2.
I hope they refresh the free series because its a shame the only free platform tool you can buy is the arc, magnacut is mega overkill for the majority of people and all of the coatings just add extra cost TBH.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login