PST, PST II Owners Club
-
Great pics and tools, LC and Frenche

-
Bad picture, but nice Pradel that is the perfect complement to the PST2, no redundancy, all the tools I want.
An Alox farmer would also work, but would not have a carbon blade , nor would it sport that fantastic awl. Used it today to untie my youngest shoelaces and it works magic.
[attach id=0 msg=2558663]
[attach id=1 msg=2558663]

-
Me too! That's quite an awl!
-

A great combination!
I

-
@Barry Rowland said:
Looks like an unstoppable combination to me! I like how the PST carries. It's just a little bit smaller, and those scissors!Re-evaluating my daily carry just this week. Normally it is a Rebar (in an American Bench Craft sheath courtesy of a member here) and a Deluxe Tinker or Tinker. That gets me plyers (or 2), a scissors (Tinker) and a saw on the Rebar. And all the other tools, some duplicated.
May go with one of my trusty ol' PSTII's and a Vic Climber eco with nylon scales. Theres my plyers, scissors, saw and other tools as well, in a smaller, lighter overall carry.
The PST and PST II are obviously THE classics and that's why I went with the Rebar - to get a newer version keeping it as classic as possible several years ago before the Bond came out. By the way. Why Bond. Why not just PST3?
-
@ThundahBeagle said:
Re-evaluating my daily carry just this week.
~
~
The PST and PST II are obviously THE classics and that's why I went with the Rebar - to get a newer version keeping it as classic as possible several years ago before the Bond came out. By the way. Why Bond. Why not just PST3?Good question,
I have kind backed into the LM INTRODUCTION SYSTEM!!!My first real user was a SUPERTOOL 300, on belt each day for work task. Asked for something lighter, told the REBAR will tickle my fancy.
It did, the BIT KIT adapter fit both the ST300 and the REBAR. I was, still am a happy user.
Curiosity had me acquire a BOND, sold that it had a feel like the original PST.
Non locking tools, no saw and no serrated blade made narrower and lighter. And my bit adapter also fit perfectly. One bit kit shared between 3 tools.Then read about the comparison of the BOND to PST, so hunting I went. Tracked down my first PST, the tools are built with purpose, like a fine sports car. Not super or heavy duty. Just right. And the rest is history in progress. I hunt PST’s, there are many variations of this tool as it was refined. The PST and PSTII are the first and one of a kind tools.
The second gen variants are similar but carry their own names.
I see the BOND name just being a tool that bridged the gap from the REBAR, with locking complete tool set, back toward the original purpose PST, yet updated with the heavier tool set, without locking tools, providing a BOND to the past. Different but the same.
Yes, BS, but my story, my impression!
I do have BONDs scattered about the house, one in my different carry bags. The Gen 1 and the Gen 2. The BOND just fits the need for me.
Rebar rides the belt, a PST will ride easily in a pocket for casual affairs, lighter and elegant.
-
@ThundahBeagle said:
Re-evaluating my daily carry just this week. Normally it is a Rebar (in an American Bench Craft sheath courtesy of a member here) and a Deluxe Tinker or Tinker. That gets me plyers (or 2), a scissors (Tinker) and a saw on the Rebar. And all the other tools, some duplicated.May go with one of my trusty ol' PSTII's and a Victorinox CAMPER ecoline (with nylon scales). Theres my plyers, scissors, saw and other tools as well, in a smaller, lighter overall carry.
The PST and PST II are obviously THE classics and that's why I went with the Rebar - to get a newer version keeping it as classic as possible several years ago before the Bond came out. By the way. Why Bond. Why not just PST3?
Fixed it. Vic CAMPER, not Climber.
-
@LoopCutter said:
Good question,
I have kind backed into the LM INTRODUCTION SYSTEM!!!My first real user was a SUPERTOOL 300, on belt each day for work task. Asked for something lighter, told the REBAR will tickle my fancy.
It did, the BIT KIT adapter fit both the ST300 and the REBAR. I was, still am a happy user.
Curiosity had me acquire a BOND, sold that it had a feel like the original PST.
Non locking tools, no saw and no serrated blade made narrower and lighter. And my bit adapter also fit perfectly. One bit kit shared between 3 tools.Then read about the comparison of the BOND to PST, so hunting I went. Tracked down my first PST, the tools are built with purpose, like a fine sports car. Not super or heavy duty. Just right. And the rest is history in progress. I hunt PST’s, there are many variations of this tool as it was refined. The PST and PSTII are the first and one of a kind tools.
The second gen variants are similar but carry their own names.
I see the BOND name just being a tool that bridged the gap from the REBAR, with locking complete tool set, back toward the original purpose PST, yet updated with the heavier tool set, without locking tools, providing a BOND to the past. Different but the same.
Yes, BS, but my story, my impression!
I do have BONDs scattered about the house, one in my different carry bags. The Gen 1 and the Gen 2. The BOND just fits the need for me.
Rebar rides the belt, a PST will ride easily in a pocket for casual affairs, lighter and elegant.
Nice explanation of how you started off in all this mess, ha ha!.
I went the opposite way. Vic Tinker, then a PST2. Carried either one of those two for years - decades, really. Then destroyed my original Tinker decided a saw might be needed, found this place, rebuilt and restored my Tinket and found a used Surge on CL. Then saw that LM had seriously added to thier repertoire and went down the rabbit hole looking for perfect. Never did find that. But I have a dozen LM and a dozen Vics.
I carry Rebar on my belt and Tinker/Deluxe Tinker in pocket. Always both in the truck and both in the day pack.
But it seems I can save a few ounces of weight by going back to PST2 and using the ecoscale Camper, and still have plyers, scissors, saw, Philip's, file, awl, corkscrew, plain blades and serrated (combo) in such a small couple packages and elegant in thier simplicity
-
Welcome to the PST Club! There are so many variations. I've never personally encountered a black oxide PST either, but they're out there.
-
Thank you

So I've got a new one, since about one hour :D
One handle is stamped 1292, but the other one seems to be not stamped with any date. Do I need to change my glasses, or do you think it's possible to have only one handle date stamped

Edit : I'll post some pictures, of course ;)
-
It's very possible, but more likely it's just worn. Either way, congratulations!
-
Nonaute, the next PST to look for is the Japanese PST, a very early model that came into being when Leatherman was overwhelmed with orders for the PST. There's a thread in the Leatherman section of MTO. Most people abbreviate it to JPST.
/topic/32257
-
@Barry Rowland said:
Nonaute, the next PST to look for is the Japanese PST, a very early model that came into being when Leatherman was overwhelmed with orders for the PST. There's a thread in the Leatherman section of MTO. Most people abbreviate it to JPST./topic/32257
Thank you Barry, I already have a japanese one (solid rivets, blade stamped Leatherman Japan), I had the chance to find one one month ago ;)
Laurent
-
Excellent Laurent! For your date code, it may just not have one. Maybe a factory warranty repair?
-
Yes I thought about that too Barry ;)
Here's some pictures, but I know it's not easy to tell with only some online pictures...
Well, I'll assume that... I don't know why, but it's a fact :o
[attach id=0 msg=2559873]


-
It's definitely a nice one! There's members here that hold the equivalent of PhD in the PST. They will probably know what's going on with yours.
-
I also have one with no date stamp in the handle. I don't think it faded, it would still have some kind of visible mark methinks.
Let's just say there are extra collectible.
BTW, I have a BO PST…
I'll be glad to trade it for a Flair or a Sideclip if anyone is interested.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login



