Black-Out EDC Challenge - January 2026
-
@WECSOG said:
That's interesting because I also have to take photos in dark spaces sometimes. Occasionally, big dark spaces. I take these photos through an app on my smartphone. Usually the light on the phone is sufficient, maybe with some added light from my C cell LED Maglite that I bring along. But I recently had to get interior photos of a large, closed department store that had no electrical service. I managed to get it done (barely) with my Maglite, but after that one I decided that I needed some better options for such situations. I bought (on ebay) two sealed beam lanterns made in the 1950s or '60s by a company called "Big Beam." They use the square 6 volt lantern batteries, carried in a built in steel box with a hinged top. Problem is, the sealed beams are spotlights and not really very powerful. So I'm converting them to 12V floodlights so I can set them on the floor and illuminate a large area.I’ve found situations like this to be a great application for some of the modern handheld flashlights that have a turbo mode, i.e. 2000 - 3000+ lumens for 20 - 30 seconds (until the thermal regulation kicks in). Plenty of time to take a few photos. Indoors, pointing the light at the ceiling can often result in a somewhat even, usable light throughout the space.
-
@nate j said:
Day 12Can’t recall the name of this Gerber; they made so many variations that were similar. Handle is too short though…
Reminds me a lot of my Strongarm--but a different sheath (and straight edge).
I think the family is based on the LMFII, which was originally introduced as a modern replacement for the old Jet Pilot's Survival Knife--called the ASEK (Aircrew Survival and Escape Knife, IIRC)
-
I fell a bit behind. Took photos, just didn't upload or post them.
Day 11:
Spyderco Saver Salt--yep, yet another I bought from here years back. If I recall correctly, it was bought not long after a family friend showed me his old Spyderco Clip-It Delica saying it was the best knife he ever had for twine and net wrap.
When we had sheep, this was mostly my twine knife due to being designed for rescue use and full SE. These days, it's mostly a box cutter.
[attach id=0 msg=2560088]

-
Day 12:
SOG Vulcan.
I picked this one out of a box of cheap Frost junk knives for $10 at a local flea market. It was rusted (VG-10 doesn't rust THAT easily!), nasty, and had a pretty bent up clip (not to mention blunt).
I cleaned it, swapped and straightened the clip, and a year and a half later (after finally figuring out the Worksharp Guided Field Sharpener and sharpening in general) finally got it sharpened a couple weeks back. It was about a $150 knife new.
I like the feel of it, and personally, ARC LOCK is better than the AXIS Lock of Benchmade. I have recently started carrying it as a bigger knife is easier to use in the winter. Also--AXIS-type locks are the only ones I've found that work well for a southpaw like myself.
[attach id=0 msg=2560090]

-
Day 13:
[attach id=0 msg=2560091]

-
Day 14:
Started on another stage of basement organization.
Found my box of big taps--which I have never had a use for--but it's close to like half a grand in taps, large bits, and mills. I got these in a box of machinist's stuff--and they go up to like 2". I've only had to tap a few smaller screws.
[attach id=0 msg=2560093]

-
Day 15:
I've been repurposing some furniture that was stored in a above-garage apartment/storage building ahead of fully cleaning it out, standardizing all storage of the remaining stuff in 27-gallon totes, and using it as a hobby room.
We had purchased a pretty nice farmhouse-style table from Kmart years before they closed (early '10s--store closed in '16), but it wasn't used that long before my folks got a good deal on an antique table (that was a pedestal that constantly wobbled). Ahead of potentially moving it upstairs again, I set it up in the basement to replace a 70 year old Samsonite card table that was my dining table down here.
Also: got my black Classic SD back out. One advantage of owning a dozen+ Classic SDs and similar is that they're quickly replaced. I paid a dollar for this one at a local antiques store. The Classic SD does most of what I need to do, while weighing nothing. It's so lightweight and unnoticeable--I don't even take it out of my pocket when I go to bed.
[attach id=0 msg=2560094]

-
Day 16:
I went back to my "old" toolbox--which was bought new for my Granddad as an anniversary gift 60 years ago. It's been my portable box for about 10.
I've swapped back and forth between a 24" Waterloo Mechanic's Box, a large cantilever tacklebox (Old Pal PF4000), and an unbranded (and probably cheap--not to mention with a small pinhole from rust at one corner) cantilever box.
The Craftsman has always been just the right size, tough as nails, and laid out to where I can access everything easily (PS: always put small tools in zipper bags--I get the dollar ones from Hobby Lobby).
I also gathered up a bunch of tools that were strewn everywhere.
Had to remove a larger Sawzall blade in a Stanley folding saw (which takes Sawzall-type blades) so I could fold it with a blade in.
Used my Classic SD to swap blades. The Stanley has always felt cheap, and is soon to be replaced with a Milwaukee I can change the blades in without a screwdriver. Mostly, it's when I'm doing small stuff and I need something that can cut metal--I also keep a folding camp saw in this box for wood.
[attach id=0 msg=2560095]

-
@nate j said:
That coat isn’t worn daily, but is over 20 years old and still going strong.
@LoopCutter said:
BO REBAR and my CR 2.5 (fixie) via neck cork) are at my side.
@fullbreakfast said:
Or as I sometimes think of it, the Robocop watch:A fitting moniker!
@ElevenBlade said:
So I figured that I would just give it a shot for a few days to see how we get along
Hopefully you'll like it okay. At the very least, you got a pretty cool photo of it!
@ReamerPunch said:
No, why would they be? It's summer down here.I forgot all about that. Hell, I visited Darwin in February of 2004 (we drank the town out of Jägermeister the day we pulled in, but that's a different story). Strike my previous from the record.

@cody6268 said:
AXIS-type locks are the only ones I've found that work well for a southpaw like myself.I know a lot of people aren't too fond of the "lefty" liner lock found on 111mm SAKs. What are your thoughts on that subject?
Day 16
Yes, my wallet is Carhartt. The knife is a walnut Opinel No. 8.
[attach id=0 msg=2560105]

-
@aicolainen said:
Day 16Thank you all for the encouraging words.
I didn't intend to leave the thread entirely, I just wasn't sure I could put up a new pic every day. Lets just see how it goes.My headlamp gets me safely to work every day when I'm not driving, which is most days.

I should have taken this photo earlier in the challenge. Even though it's still quite dark in the morning and evening when I leave/return, there's noticeable more of that dim blue early morning light than we had just two weeks ago.
Now I don't really need my headlamp to see unless walking conditions are very difficult and I have to watch my step. I mostly use it for others to see me. On the last 30% of my walk I pass through an area with some traffic and want to make sure I'm visible in the dark.
Kit is mostly the same, but I switched my headlamp from HS10 to a HS05 today. Forgot to charge my HS10 and wasn't sure it would make it all the way.
Also switched backpack from my black Urban assault to the not so black Evergoods CTB26. I've been meaning to do it for a while as the extra space is convenient for this season. Not black, but makes a nice contrasting background for the black tools.I like the backpack. Sofirn makes some nice flashlights
@nate j said:
I’ve found situations like this to be a great application for some of the modern handheld flashlights that have a turbo mode, i.e. 2000 - 3000+ lumens for 20 - 30 seconds (until the thermal regulation kicks in). Plenty of time to take a few photos. Indoors, pointing the light at the ceiling can often result in a somewhat even, usable light throughout the space.Another way flashlights can be used is with a diffuser or a wide angle flood beam.
-
Day 16
Really switched things up today, except kept the ATK. Added an HDS Rotary and Zippo
-
Day 17

-
Day 17

I keep this small Nebo head torch (Mycro 250) in my tool bag for those times when you need light and both hands free. It is not the most powerful, or longest-lasting, but the big advantage of it is that it is very small and light (I think 34g including the headband) which makes it comfortable to use. You can pretty much forget you are wearing it. Battery is good for a couple of hours on high setting.
They are also cheap. I paid £30 for a pack of two. Keep the other in the car.
-
Day 17
From my tacticool curiosity days and being a BUCK FAN, I had to try these two one hand opening models.
[attach id=0 msg=2560170]
The VANTAGE, a flipper.
The QUICKFIRE , a spring assisted mid lockback.
[attach id=1 msg=2560170]
Both are sharp from the package, BUCK SHARP.
THE VANTAGE, is a flipper only with well timed wrist action. This was the low in version, next step up has bearings and maybe more certain to open with just finger action.
This is a good pocket carry, with deep pocket clip, and a liner lock. To be honest, I tried to like this but the liner lock and the less than functional flip action side lined this after a month of carry.The QUICKFIRE, is spring assisted, locking mechanism present to prevent accidents. This did not disappoint, opened quickly each and everytime. Deep pocket carry, and a mid lockback design like my BANTAMS, required little adjustment. I did carry this regularly. But, as I matured my needs changed and this model was discontinued, so replacement could be a problem.
Both are display knives.


-
@Sos24 said:
Really switched things up today, except kept the ATK.I like the wrap!

@ReamerPunch said:
Day 17My research led me to believe the Coast G19 has one brightness level and runs on a single AAA. Sounds like my kind of flashlight!
@fullbreakfast said:
I keep this small Nebo head torch (Mycro 250) in my tool bag for those times when you need light and both hands free.I like having a headlamp. It's a great way to have light when you need both hands free and moving a tripod work light around is too much hassle.
@LoopCutter said:
Both are display knives.I'd consider carrying a Vantage, but display seems like the best option for the Quickfire. That handle looks like Hotspot City!
Day 17
Here's a G-Shock that is rarely worn, as its sentimental value is way to high.
[attach id=0 msg=2560191]

-
@Farmer X said:
~I'd consider carrying a Vantage, but display seems like the best option for the Quickfire. That handle looks like Hotspot City!
Actually, it is the other way around!
The vantage requires you to position your hand one way to open and then adjust it for use, and then adjust your hand again to close. It also can cause you to drop the knife during these adjustments.
The Quickfire, opens naturally, with a thumb stud push, then return its natural position.
Closing is a bit more intentional, has I would use my other hand to release the midlockback. Plus the handle is a tad shorter, so once your hand is in position there is no need to adjust your grip. Very natural even with my XXL PAWS. YET, right hand use can be a draw back as I frequently use either hand with majority of my cutters. 😀
-
@Farmer X said:
My research led me to believe the Coast G19 has one brightness level and runs on a single AAA. Sounds like my kind of flashlight!It does, but keep in mind, this is an inspection light. Not the best or brightest, but perfect for my small edc pouch and bright enough to find your way around a dark place. I bought three over ten years ago, and they still work perfectly fine.
-
Day 17
I have a couple of Sofirn work/headlights. This one is 4000k and I use it at least once most days. The other one is 2700k, lives on a hat near the door, and I use it multiple times every night.
Also shown here is my newest Boker automatic, and my new OTF automatic that uses disposable scalpel blades.

-
@LoopCutter said:
Day 17From my tacticool curiosity days and being a BUCK FAN, I had to try these two one hand opening models.
[attach id=0 msg=2560170]
The VANTAGE, a flipper.
The QUICKFIRE , a spring assisted mid lockback.
[attach id=1 msg=2560170]
Both are sharp from the package, BUCK SHARP.
THE VANTAGE, is a flipper only with well timed wrist action. This was the low in version, next step up has bearings and maybe more certain to open with just finger action.
This is a good pocket carry, with deep pocket clip, and a liner lock. To be honest, I tried to like this but the liner lock and the less than functional flip action side lined this after a month of carry.The QUICKFIRE, is spring assisted, locking mechanism present to prevent accidents. This did not disappoint, opened quickly each and everytime. Deep pocket carry, and a mid lockback design like my BANTAMS, required little adjustment. I did carry this regularly. But, as I matured my needs changed and this model was discontinued, so replacement could be a problem.
Both are display knives.

I liked Bucks tactical offerings. I had a Tac Lite a couple decades ago that I lost. I still regret losing it, and Im quite sure that it would be better than the folding knives I have now.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login