Black-Out EDC Challenge - January 2026
-
@Farmer X said:
My research led me to believe the Coast G19 has one brightness level and runs on a single AAA. Sounds like my kind of flashlight!It does, but keep in mind, this is an inspection light. Not the best or brightest, but perfect for my small edc pouch and bright enough to find your way around a dark place. I bought three over ten years ago, and they still work perfectly fine.
-
Day 17
I have a couple of Sofirn work/headlights. This one is 4000k and I use it at least once most days. The other one is 2700k, lives on a hat near the door, and I use it multiple times every night.
Also shown here is my newest Boker automatic, and my new OTF automatic that uses disposable scalpel blades.

-
@LoopCutter said:
Day 17From my tacticool curiosity days and being a BUCK FAN, I had to try these two one hand opening models.
[attach id=0 msg=2560170]
The VANTAGE, a flipper.
The QUICKFIRE , a spring assisted mid lockback.
[attach id=1 msg=2560170]
Both are sharp from the package, BUCK SHARP.
THE VANTAGE, is a flipper only with well timed wrist action. This was the low in version, next step up has bearings and maybe more certain to open with just finger action.
This is a good pocket carry, with deep pocket clip, and a liner lock. To be honest, I tried to like this but the liner lock and the less than functional flip action side lined this after a month of carry.The QUICKFIRE, is spring assisted, locking mechanism present to prevent accidents. This did not disappoint, opened quickly each and everytime. Deep pocket carry, and a mid lockback design like my BANTAMS, required little adjustment. I did carry this regularly. But, as I matured my needs changed and this model was discontinued, so replacement could be a problem.
Both are display knives.

I liked Bucks tactical offerings. I had a Tac Lite a couple decades ago that I lost. I still regret losing it, and Im quite sure that it would be better than the folding knives I have now.
-
Day 17
The black Cadet isn't blacked out by my definition, but it'll have to suffice today. It did get used to tighten a loose quick mount plate on my photo light, and I'm getting a bit bored of just taking pictures of the few truly blacked out items I have - even if I use them too, every day.
Oh, and the photo light is blacked out (except for the diffuser, but that's add on and doesn't count ::) ). I can't claim it's part of my EDC, but I'm sure these things are for some.

-
Day 16
Climber on cigar duty again…

-
Day 17
No usage today. Just a picture

-
Day 17
Dog walk carry. I haven’t shown it before, but the sting ring is a common carry when walking. It is mainly in case of an aggressive loose dog or goose. The sound alone has been sufficient the few times I had a concern.
-
Busy busy
Day 16 (Late)
It's a really good bottle opener, guys.
[attach id=0 msg=2560298]
Day 17
Casio CA53W-1, the modern version of the Back to the Future calculator watch, with a NATO band from the surprise box.[attach id=1 msg=2560298]


-
PM me if you want to book a date and host a Mini Challenge. Available dates: 20th, 25th, 30th.
-
Day 18
Yes, that is a Cobra in my pocket, but I am also happy to see you.

-
Day 18
Used my SRK to lop some twigs off a stick of firewood prior to splitting it. Illumination duty by Sofirn headlamp.

-
Day 18
I bought an Emerson CQC - 7 at a flea market for about $100 bundled with a new SAK CLIMBER for around $100 in early 2000s.
Used the “7” has part of my work kit, as it was great for cutting a variety of materials with its chisel grind. About 2016, the “7” disappeared from a job site. Just grew legs and walked off.
It was then when I looked for a replacement on line did I learn the EMERSON STORY. Also, learned that I could not afford a new CQC7 new, from Emerson or even a dealer at a gun show. I was sick.
A little while later, learned that Emerson and Kershaw collaborated to make a line of knives designed like the first CQC models.
[attach id=0 msg=2560345]
Starting at the top
CQC5 - great pocket carry, and easy blade deployment via Wave blade feature.
CQC7 - Tanto blade, very close to my missing original
Except does have the grippy handle and chisel grind blade.
CQC8 - the other model of a 7, modified clip/drop blade.
(CQC -=. CloseQuarterCombat)
It is my understanding that the Emerson line was designed for combat purposes with input from Elite Special Forces operators in the 90s. Quiet blade deployment via the wave feature, chisel grind for ease of field sharpening. And handles that were non slip.These knives pictures are nice, but really copies of the originals at a very reasonable cost.

-
@LoopCutter said:
Day 18I bought an Emerson CQC - 7 at a flea market for about $100 bundled with a new SAK CLIMBER for around $100 in early 2000s.
Used the “7” has part of my work kit, as it was great for cutting a variety of materials with its chisel grind. About 2016, the “7” disappeared from a job site. Just grew legs and walked off.
It was then when I looked for a replacement on line did I learn the EMERSON STORY. Also, learned that I could not afford a new CQC7 new, from Emerson or even a dealer at a gun show. I was sick.
A little while later, learned that Emerson and Kershaw collaborated to make a line of knives designed like the first CQC models.
[attach id=0 msg=2560345]
Starting at the top
CQC5 - great pocket carry, and easy blade deployment via Wave blade feature.
CQC7 - Tanto blade, very close to my missing original
Except does have the grippy handle and chisel grind blade.
CQC8 - the other model of a 7, modified clip/drop blade.
(CQC -=. CloseQuarterCombat)
It is my understanding that the Emerson line was designed for combat purposes with input from Elite Special Forces operators in the 90s. Quiet blade deployment via the wave feature, chisel grind for ease of field sharpening. And handles that were non slip.These knives pictures are nice, but really copies of the originals at a very reasonable cost.
Interesting story and mini collection.
Emerson has an interesting story, but the knives hasn't really appealed to me for the most part.
The only one I've ever really wanted to give a try is the Mini A-100.
For a brief minute we actually had a store here in Norway that sold Emerson. Didn't have a wide selection of models. Don't remember if they had the Mini A-100, it was before I had it in my sight. Still kind of regret not getting one while they were easier and somewhat cheaper to get hold of.Your post has initiated quite a dilemma for me. The Mini A-100 used to be forever out of stock. I've signed up for the "notify me when back in stock" multiple times, and with nothing but crickets in return I've come to terms with it probably just being silently discontinued.
Now I want to make that claim without checking his page, and whatdoyaknow... there's one version in stock.
2026 is suppose to be my successful attempt at trimming the herd. -
Day 18

I couldn’t let the month pass without getting this little beauty out.
-
Seems that i forgot to yesterday
Day 17 of 30
No use for MXBS[attach id=1 msg=2560393]
Day 18 of 30
Today some beard trimming with MXBS
[attach id=0 msg=2560393]


-
Day 18
My wife got me a new trimmer for Christmas after my old one bit the dust. The blade (black!) pops out nicely for cleaning. Unfortunately, today it fell down the sink and got wedged about halfway down the pipe. I wasn't too worried, since there's no way it could make it through the p-trap, but I wanted to try to fish it out rather than crawl under the sink to take it apart. The magnet tipped ruler from my Roxon Flex worked great. Easily reached far enough down to grab it, and the magnet got a nice strong hold. Got it out in a jiff.

-
Day 18
If you’re wondering if this can fit into an Altoids tin, it can’t.
I hiad this in mind because I am thinking of making an Altoids tin “survival kit” and wondering if theres a tiny fixed blade that can fit in it.

-
Day 17
Shameless repost from a discussion on the flashlight subforum…

-
@LoopCutter said:
Actually, it is the other way around!I never would have guessed that!
@WECSOG said:
My new OTF automatic that uses disposable scalpel blades.That's pretty cool!
@fullbreakfast said:
I couldn’t let the month pass without getting this little beauty out.That sure is a good-looking little blade!

@ElevenBlade said:
I am thinking of making an Altoids tin “survival kit” and wondering if theres a tiny fixed blade that can fit in it.I am certainly not aware of one. But for whatever it's worth, I know Rough Ryder makes some tiny fixed blades.
Day 18
Just a coin wallet for today. But I'll have an action shot for tomorrow.
[attach id=0 msg=2560435]

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login