Black-Out EDC Challenge - January 2026
-
Day 22
The neighbor was doing some work on a new to her car. I offered to try and help remove a broken dipstick when she looked at me as “your the one usually with tools on you”. The funny thing is between the Spirit and the Golfer, it was the Golfer corkscrew that ended up helping just like pulling out a cork. No action picture because my phone was in the house.
-
@Sos24 said:
Day 22
The neighbor was doing some work on a new to her car. I offered to try and help remove a broken dipstick when she looked at me as “your the one usually with tools on you”. The funny thing is between the Spirit and the Golfer, it was the Golfer corkscrew that ended up helping just like pulling out a cork. No action picture because my phone was in the house.I’ve long been of the opinion that the corkscrew is far more useful and versatile than the back-mounted Phillips, but I did not have “broken dipstick remover” on my bingo card.
Well done!

-
Day 22
Walking in the woods. I really like how light the Gerber LST is.

-
@Sos24 said:
Day 22
The neighbor was doing some work on a new to her car. I offered to try and help remove a broken dipstick when she looked at me as “your the one usually with tools on you”. The funny thing is between the Spirit and the Golfer, it was the Golfer corkscrew that ended up helping just like pulling out a cork. No action picture because my phone was in the house.Very good job!
Another point for the corkscrew!
I always chuckled to my self, when working at the Y near children. They never forgot that first time seeing me trim a broken branch with my REBAR.
They always asked, “Going use your Leatherman?”
-
-
@nate j said:
I’ve long been of the opinion that the corkscrew is far more useful and versatile than the back-mounted Phillips, but I did not have “broken dipstick remover” on my bingo card.I tend to agree.
If a bottle of wine needs opening, it's usually urgent.
A loose Phillips can (almost) always wait. -
@fullbreakfast said:
Day 21My favourite screwdriver:

Wera Kraftform 20
The image did not appear to work on this post. Trying again:

Right, that seems to have worked. I can see it, anyway.
-
Day 23 of 30
Used MX rescue blade today to cut plastic bands around boxes. Also carried Huntsman since MXBS doesnt have saw.
[attach id=0 msg=2561000]

-
Day 23

-
@ElevenBlade said:
I really like how light the Gerber LST is.I have a similarly lightweight knife...but I don't remember if I've shown it yet.
@Antti Lammi said:
Used MX rescue blade today to cut plastic bands around boxes.That rescue blade could come in handy at times!

@ReamerPunch said:
Day 23Tuna?
Day 23
Some smurfty cold weather (0 Fahrenheit) for me today...we need a barfing emoji. Here's a little combo tool/dedicated openers in an attempt to make it better. I decided to give the Bantam a little pocket time.
[attach id=0 msg=2561061]

-
@aicolainen said:
I tend to agree.
If a bottle of wine needs opening, it's usually urgent.
A loose Phillips can (almost) always wait.

If a SAK has an opener layer, it will handle most Phillips screws pretty well without the need for the back side Phillips.
-
Day 22 (late)

I bought a bunch of these mini Pilots as I thought they would be a good inexpensive pen to have stashed in various bags and pouches. They are decent enough, but as I discovered after I bought them, Pilot does not sell refills for these. That makes them throwaway items, which is bogus. I won’t be getting any more.
-
Day 23
Today’s job was removing an old unwanted wood burner from our house.

This turned out to be a hard job as well as a very dirty one. The thing was made of thick slabs of cast iron and I soon realised the only way I would be able to get it out was to take it apart and remove it in pieces. The whole thing must have weighed north of 150kg / 300lb. In addition I think it had been in place for a good 40 years, and every nook and crevice of it was packed with ash and soot.
The state of the fasteners was not ideal:

Some were not only rusted but had deformed heads that required the socket to be bashed on with a hammer.
Apparently the mechanism of my Wera Zyklop ratchet is strong enough to shear off a rusted bolt:

At one point I thought I was going to use this, as none of my metric hex bits seemed to fit:

but it turned out it was a 4mm fastener that was just clogged up with crud.
When I had finally got out all of the bolts, apart from the ones that snapped, the damn thing still did not want to come apart. Being a man of great finesse, I started hitting it with a very large hammer. At this point it became apparent that as well as being bolted together, the main pieces were also cemented with…some kind of smurfing cement. The hammer did the job, but fragments of cement went everywhere. I had put down some plastic on the floor, but as usual the mess extended beyond the area of the plastic.
Satisfyingly I prevailed. My enemy lies vanquished in many pieces in my back yard, I have cleaned up the room, showered and will shortly have a glass of wine.
Cheers!
ps I guess my black item in all this is the Wera ratchet. Unless my hands count.
-
Day 23
Cameo appearance by the MP600 Bladeless. Props to Gerber for making an actual bladeless multi for me to leave in my work desk. Filed the broken clip on a pen so it wouldn't poke me while I write.

-
Day 23
Used the Imperial soddy to spread cream cheese on a bagel.

-
Day 21
LionSteel Jack 2

-
Day 22
Spyderco Endura

-
Day 23
Kizer Ursa Major

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login