Negl Hugge Wave!
-
Stamping die tooling is REALLY expensive. Tens of thousands of dollars expensive. :-\ Its surprising that they built new ones especially for the 2HO Wave.
It doesn't seem like the number of Waves they would sell in Denmark would justify the cost.They probably built some new punch and die sections and changed them over in the Wave handle stamping die. No need to build a whole new die for such a small change.
Dave
Good point. :-\
-
Just got my second 2-hand opening Leatherman direct from Denmark in the mail on Friday! (thanks Allan buddy!!)
The mighty SURGE!, equipped with nail nicks on both blades instead of thumb holes:


Unlike my danish Wave though, this one has no special handles or stamping on it. The only difference between the Denmark Surge and a regular Surge is the two knife blades. (The date codes are 0605, a few years ago, so it is possible that there have been changes by now)
One thing I noticed is how small the nail nicks are.
You'd think a great big tool would have great big nail nicks, but it isn't so. The blades deploy easily enough, but its not as much fun as a one-hander. Given the choice, I'll take the standard one-hand-opening blade any day! (sorry Allan) ;) -
-
Given the choice, I'll take the standard one-hand-opening blade any day! (sorry Allan) ;)
It must be great to have that choice.... ;) :D
Good pictures and I hope you enjoy it (anyway)...

Oh yah, you bet!
Like MultiMat, the more unique and unusual a tool is, the more I like it! :DNow, you and I need to talk about finding me an old 2HO original Wave...... :D
-
Given the choice, I'll take the standard one-hand-opening blade any day! (sorry Allan) ;)
It must be great to have that choice.... ;) :D
Good pictures and I hope you enjoy it (anyway)...

Oh yah, you bet!
Like MultiMat, the more unique and unusual a tool is, the more I like it! :D
Now, you and I need to talk about finding me an old 2HO original Wave...... :DLike this one..? :D I'll keep an eye out for one, sir...

-
Yep, that's the one!!

-
Darn...I just realized that eventually, I will be hunting these down also. :(
-
@Chako said:
Darn...I just realized that eventually, I will be hunting these down also. :(Bah, that's a good thing Chako. Nothing is more satisfying to a collector than finally getting a particular item after searching a long time for it. If there were no hard-to-get tools, you would never get to experience that.

-
Darn...I just realized that eventually, I will be hunting these down also. :(
Bah, that's a good thing Chako. Nothing is more satisfying to a collector than finally getting a particular item after searching a long time for it. If there were no hard-to-get tools, you would never get to experience that.

+1

-
Surge......

-
-
Darn...I just realized that eventually, I will be hunting these down also. :(
Bah, that's a good thing Chako. Nothing is more satisfying to a collector than finally getting a particular item after searching a long time for it. If there were no hard-to-get tools, you would never get to experience that.

+1

+2
The "thrill of the chase" as it were is all part of it. If everything was easy to get it wouldn't be half as fun.
-
Well now, I have been chasing furiously these last few months.
Having way too much fun doing it also.

-
[quote author=Chako link=topic=9315.msg256075#msg256075 date=1252266081]
Darn...I just realized that eventually, I will be hunting these down also. :(Bah, that's a good thing Chako. Nothing is more satisfying to a collector than finally getting a particular item after searching a long time for it. If there were no hard-to-get tools, you would never get to experience that.

+1

+2
The "thrill of the chase" as it were is all part of it. If everything was easy to get it wouldn't be half as fun.
[/quote+3 My cousins FIRST SAK was a 1933 Vic Soldier.
I know collectors that for years have never seen or handled one, where does one go from here?
Of course I am jealous but does she really appreciate the SAK?
-

Hmmm - I needed to drag this thread back from the grave to ask Bob a question.
Can you tell me what the date codes are on this Wave please Bob? I'm trying to figure something out.......
Your bump of the picture leads me to a question: are the blades' nail nicks stamped into the wrong side of the blades?

-
Well, that's part of what I'm trying to figure out actually Sazabi - let me explain!
I (thanks to our friendly resident Dane) have a couple of the 2H tools now, and both of them have the nail-nicks on top (i.e. the opposite of Bob's there). Further more, neither has "2H" stamped on the handles, and my Wave doesn't have the specially contoured handles like Bob's.
In other words, both of mine are standard Leatherman tools, but simply lack the OHO "hole" in the blades.
So my theory is that the earlier 2H tools were simply as I've described - stock tools with un-blanked blades. Mine are dated 0106 and 1004, so pretty old for the two tools in question.
Bob's on the other hand looks as though it's had a lot more thought put into it - and I suspect it's newer.
Whatever the story, I now need one like Bob's :D
-
You're thinking is spot on Dave - both date codes on mine are 0808.

But why the change? (it would have cost Leatherman thousands of dollars to retool the Wave handle stamping die) My theory: I think the Danish authorities insisted upon it.
With the nail nick on the outboard side and the swooped-down contour of the handle, the earlier version could still be opened with one hand simply by using the friction of your thumb against the side of the blade. I bet Leatherman was finally called on this, and was forced to make the changes we see on mine.The redesigned model can't be opened with one-hand thumb friction, due to the nail nick being on the inboard side, the "high wall" contour of the handle in that area, and especially the extra bevel ground into the blade about where the thumbhole would be on a standard 1HO model.
Soooooo, if my theory is correct, there ought to be "2H" versions of the Surge out there somewhere as well...?

-
-
@J-sews said:
You're thinking is spot on Dave - both date codes on mine are 0808.
But why the change? (it would have cost Leatherman thousands of dollars to retool the Wave handle stamping die) My theory: I think the Danish authorities insisted upon it.
With the nail nick on the outboard side and the swooped-down contour of the handle, the earlier version could still be opened with one hand simply by using the friction of your thumb against the side of the blade. I bet Leatherman was finally called on this, and was forced to make the changes we see on mine.The redesigned model can't be opened with one-hand thumb friction, due to the nail nick being on the inboard side, the "high wall" contour of the handle in that area, and especially the extra bevel ground into the blade about where the thumbhole would be on a standard 1HO model.
Soooooo, if my theory is correct, there ought to be "2H" versions of the Surge out there somewhere as well...?

Thanks for confirming Bob - much appreciated

Pressure from the Danish authorities, or maybe (just maybe), Leatherman decided that there was enough of a market to do it "properly" after initial successes - that's a nicer idea anyway.
On the cost of re-tooling - I wonder if this actually "justifies" the higher RRP in Denmark in part, which are even higher than in the UK I believe - I'd be amazed if LM's wholesale price for the 2H "specials" wasn't a bit higher than the stock tools :)
Anyway Allan - about that British / Danish trade deficit we were talking about the other day. I think I know what I'm after now.............
:D
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login