Black-Out EDC Challenge - January 2026
-
Day 23
Today’s job was removing an old unwanted wood burner from our house.

This turned out to be a hard job as well as a very dirty one. The thing was made of thick slabs of cast iron and I soon realised the only way I would be able to get it out was to take it apart and remove it in pieces. The whole thing must have weighed north of 150kg / 300lb. In addition I think it had been in place for a good 40 years, and every nook and crevice of it was packed with ash and soot.
The state of the fasteners was not ideal:

Some were not only rusted but had deformed heads that required the socket to be bashed on with a hammer.
Apparently the mechanism of my Wera Zyklop ratchet is strong enough to shear off a rusted bolt:

At one point I thought I was going to use this, as none of my metric hex bits seemed to fit:

but it turned out it was a 4mm fastener that was just clogged up with crud.
When I had finally got out all of the bolts, apart from the ones that snapped, the damn thing still did not want to come apart. Being a man of great finesse, I started hitting it with a very large hammer. At this point it became apparent that as well as being bolted together, the main pieces were also cemented with…some kind of smurfing cement. The hammer did the job, but fragments of cement went everywhere. I had put down some plastic on the floor, but as usual the mess extended beyond the area of the plastic.
Satisfyingly I prevailed. My enemy lies vanquished in many pieces in my back yard, I have cleaned up the room, showered and will shortly have a glass of wine.
Cheers!
ps I guess my black item in all this is the Wera ratchet. Unless my hands count.
-
Day 23
Cameo appearance by the MP600 Bladeless. Props to Gerber for making an actual bladeless multi for me to leave in my work desk. Filed the broken clip on a pen so it wouldn't poke me while I write.

-
Day 23
Used the Imperial soddy to spread cream cheese on a bagel.

-
Day 21
LionSteel Jack 2

-
Day 22
Spyderco Endura

-
Day 23
Kizer Ursa Major

-
Day 2:3
Copperhead in the pant pocket and BLAST in the coat.
[attach id=0 msg=2561107]
🥶 for FARMER X, it is cold here too! And getting colder!🧊

-
@LoopCutter said:
🥶 for FARMER X, it is cold here too! And getting colder!🧊January here is often characterized by low pressure fronts and high winds, which results in rather mild weather (25-40F). But not this year. It's like a cold desert here atm. Clear skies, absolutely no precipitation and 30 to -5F for the whole of January so far. Not so cold on the thermometer this week, but with the some brisky winds adding to the equation those 15-20Fs turns bone chilling.
-
Day 23
@LoopCutter said:
I am sorry to have been of assistance. 🤩Well, due to the fact there are treasonous enablers around here, that'll do anything to sabotage the poor souls that try so hard to do the right thing..
I'm forced to ramp up my selling efforts.
Two packages leaving the house today. Packaging kindly assisted by my blacked out Banter,
-
@fullbreakfast said:
Day 23Today’s job was removing an old unwanted wood burner from our house.

This turned out to be a hard job as well as a very dirty one. The thing was made of thick slabs of cast iron and I soon realised the only way I would be able to get it out was to take it apart and remove it in pieces. The whole thing must have weighed north of 150kg / 300lb. In addition I think it had been in place for a good 40 years, and every nook and crevice of it was packed with ash and soot.
The state of the fasteners was not ideal:

Some were not only rusted but had deformed heads that required the socket to be bashed on with a hammer.
Apparently the mechanism of my Wera Zyklop ratchet is strong enough to shear off a rusted bolt:

At one point I thought I was going to use this, as none of my metric hex bits seemed to fit:

but it turned out it was a 4mm fastener that was just clogged up with crud.
When I had finally got out all of the bolts, apart from the ones that snapped, the damn thing still did not want to come apart. Being a man of great finesse, I started hitting it with a very large hammer. At this point it became apparent that as well as being bolted together, the main pieces were also cemented with…some kind of smurfing cement. The hammer did the job, but fragments of cement went everywhere. I had put down some plastic on the floor, but as usual the mess extended beyond the area of the plastic.
Satisfyingly I prevailed. My enemy lies vanquished in many pieces in my back yard, I have cleaned up the room, showered and will shortly have a glass of wine.
Cheers!
ps I guess my black item in all this is the Wera ratchet. Unless my hands count.
After all of that effort I would say your hands probably count, and though not pictured probably your clothes and arms as well.
Definitely earned that wine.
-
@BPRoberts said:
Day 23Cameo appearance by the MP600 Bladeless. Props to Gerber for making an actual bladeless multi for me to leave in my work desk. Filed the broken clip on a pen so it wouldn't poke me while I write.
The bladeless MP600 is one of the few full size MTs that come that way.
Used the Imperial soddy to spread cream cheese on a bagel.
Looks tasty
@LoopCutter said:
Day 2:3Copperhead in the pant pocket and BLAST in the coat.
[attach id=0 msg=2561107]
🥶 for FARMER X, it is cold here too! And getting colder!🧊
That is the nice type of Copperhead unlike the slithering type.
@aicolainen said:
Day 23Well, due to the fact there are treasonous enablers around here, that'll do anything to sabotage the poor souls that try so hard to do the right thing..
I'm forced to ramp up my selling efforts.
Two packages leaving the house today. Packaging kindly assisted by my blacked out Banter,
Nice Banter
-
25th Mini Challenge
Light the DarkWith all this black cary for the month on the 25th, show it with something that provides some light. Whether flashlight, lamp, lighter, match, or even some sunshine if you have nothing else.
-
Day 23
Opening boxes that came in the mail

-
@Sos24 said:
After all of that effort I would say your hands probably count, and though not pictured probably your clothes and arms as well.Definitely earned that wine.
Yeah, I was dirty as hell. Clothes went straight in the machine. I really enjoyed that shower.
A little grape-based muscle relaxant is certainly a good idea after a strenuous job. It remains to be seen how stiff I am today, when I haul myself out of bed in a while.
-
Day 23
Not much black today, but the Mini Flagship was hanging around.
-
@aicolainen said:
I tend to agree.
If a bottle of wine needs opening, it's usually urgent.
A loose Phillips can (almost) always wait.A fine philosophy. If the screwdriving job is too much to be handled by the can opener, I would far rather use a proper screwdriver / bit driver than the SAK Phillips anyway.
Of course it helps that I am always carrying a bit driving setup in my pocket.
-
Day 24

-
Day 24 of 30
No use today except fidgeting with blade
[attach id=0 msg=2561161]

-
Day 24

A spare Executive I got when they were discontinued. Never been used.
-
^ Very nice!

I wish I had anticipated the discontinuance shortage and demand.Black is very classy.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login