Black-Out EDC Challenge - January 2026
-
Day 30
I’ve been really pleased with the Gerber LST. And if I am honest, it’s been all I need lately. It’s lighter than my usual SAK and that has been nice. The walk and talk has been more pleasant too.
But for the next 30 days I will be using my Skeletool KBx on the Combo Edge Challenge
See you there

/topic/94665

-
Day 30
Mini-challenge

I’ve never really understood why in Victorinox World executives are the only people who need to peel an orange. Or maybe the only people who need help to peel an orange?
Bonus item:

-
Badges awarded to myself, Antti Lammi, ElevenBlade, fullbreakfast, LoopCutter.

I will check again in later for more badges to award. Thank you to everyone who was a part of this, active or from the sidelines. See you in the next one!
-
@ReamerPunch said:
Badges awarded to myself, Antti Lammi, ElevenBlade, fullbreakfast, LoopCutter.

Thanks for hosting this, it’s been great fun and - as on previous challenges - I have also learned new stuff that I would not have expected. In this case about Inukshuk and the brewing of the Master Tonic, among other things.
-
Thank you for the badge!Just popped in to locate it and request.

You are a great challenge host, ReamerPunch, have another

-
Day 30 Mini Challenge
Black and non-black Lyman/Ideal tong reloading tools.
Black and non-black usb wall warts.
OH Forester (black/red)
Rucksack (red)As I'm sure most of you are aware, Rucksack and Forester are the pre-2017 slide lock and post-'17 liner lock versions of the same knife.
Thanks for honchoing this, ReamerPunch. It has been a lot of fun!
ETA: Oops, I forgot to open the cap lifter/ screwdriver/ prybar/ 2nd most important tool on the Forester!


-
Day 24
Offgrid Knives Black Mamba

-
Day 25
Mini Challenge

-
Day 26
Case 65 pattern Folding Hunter in black micarta

-
Day 27
This uncommon Case 65 pattern Folding Hunter weighs in at a svelte 4.4 ounces, thanks to bolsterless carbon fiber slabs.

-
Day 30
Spirit and hammer needed for some fence mending before the next storm with high winds. The hammer tackled the loose boards. The Spirit file was needed to file a couple spots where shifting has caused the gate to catch. Not the most professional looking, but as long as they work.Mini Challenge
Two Squirt PS4s


-
@fullbreakfast said:
Bonus item...@nate j said:
Case 65 pattern Folding Hunter in black micartaGreat stuff, y'awl!

Day 30
Black and non-black items
Some Camillus electrician's knives. From left to right: Xcelite-branded and unused, blue ChannelLock Racing, and one that got olive green linen Micarta covers during a rebuild.
[attach id=0 msg=2562101]

-
Day 30
Carried the Switchplier today, and used it a fair amount, mostly adjusting some screws.
End of Challenge Review
Companies seem to be moving away from "small-medium" sized tools. Gerber killed the whole MP400 line (and the MP600 is larger than the original MPs), and the Bond is larger than the PST, despite having one less driver.
So, I decided to use this month as an opportunity to test out some of the options that still exist in the ~4" size, as well as two of the more exotic choices.
Leatherman Skeletool
The Skeletool is kind of the minimum viable product version of a pliers based MT. It's got pliers, a knife, a bit driver, and the cool bottle opener/carabiner. For the size, I can't imagine ever wanting to carry it over a basic SAK (even a Spartan gives you about double the tools). You can always tuck a Cobra or something in your pocket with the SAK and get a better pair of pliers for about the same bulk.
I'll be honest, it just kind of sucks at everything. While they're bigger than the glorified tweezers Vic puts on SAKs, they're about the smallest you can get in "real" pliers. The knife is uncomfortable, and prone to mess due to the "speed holes". The bit driver is probably the best thing on here, and I do appreciate the internal storage. I know a lot of people mod out the second bit to put in a pair of scissors or something. Do that and swap in the double ended Phillips/Flat bit as the one in your driver and you'd do pretty well for the kind of light duty this is designed for.
I awlso added a 3d printed striker to the bottom of mine. I've seen other, more elaborate, add ons, but this one was cheap and functional.
Overall, "how small can get get a knife and real pliers?" is a fair question, and Leatherman took it a step further with the bit driver. Unfortunately, a tool with so few implements can't really afford to compromise on their quality, and the knife and pliers don't perform here.
I think there is room for this to work (comfier knife, add a second tool in place of the bit, make the "butt tool" official instead of 3rd party) but it's only about halfway there right now. Maybe a Skeletool +Alpha will come along someday.
OOTB 3/10, moddable to about a 6/10. If you really, really, need the smallest "real" knife/pliers multi I guess this is it.
SOG Switch Plier 2.0
This one, on the other hand, is a pretty solid little tool. It's got about the same tool load as a traditional Bond/PST/Power Access, and a nice beefy plier head for this size. My only real complaint is that you need to open the pliers to open/close the tools, and it can be a little awkward to dig them out. Anyone who has a PST will be familiar with constantly pinching and poking your fingers to try to fish a tool out, and it's much the same here. Still, it's not a terrible sacrifice to cram this many tools and a solid pair of pliers into a small shape. The pliers, knife, etc. are a bit heavier duty than the Power Access, but the ergos are a bit weaker (and you lose the pliers-head bit driver). If they could find a way to outside mount the tools (or maybe give them more clearance from the plier handle) I think it'd be a strong contender.
I've see a lot of complaints about the SP2.0, and I think it'd got an underserved bad rap. I didn't torture test it, but it never seemed like it was going to break when I used it. The can opener isn't my favorite, but it's not even close to the worst. Small size, fun gimmick, and decent quality make this one worth giving a shot, IMO.
7/10. But it can play as both a cool, but usable, gimmicky tool or a basic slightly heavier duty one in a small size.

-
@nate j said:
Day 27This uncommon Case 65 pattern Folding Hunter weighs in at a svelte 4.4 ounces, thanks to bolsterless carbon fiber slabs.
@nate j said:
Day 26Case 65 pattern Folding Hunter in black micarta
Big fan of the Case '65s. They're good for the Giants of June Challenge. One of these days I plan to get myself a single blade '65.
-
Day 28
A.G. Russell Fruit Sampler

-
Day 29
RRR Common Stockman

-
Day 30
Mini Challenge
I don’t own much truly blacked out gear, and it’s even less common that I have an item that’s blacked out and another of the same model that isn’t. This may be about the best I can do…
P.S. Thanks to awl for a fun challenge, and special thanks to RP for hosting!

-
@BPRoberts said:
Leatherman SkeletoolThe Skeletool is kind of the minimum viable product version of a pliers based MT. It's got pliers, a knife, a bit driver, and the cool bottle opener/carabiner. For the size, I can't imagine ever wanting to carry it over a basic SAK (even a Spartan gives you about double the tools). You can always tuck a Cobra or something in your pocket with the SAK and get a better pair of pliers for about the same bulk.
I'll be honest, it just kind of sucks at everything. While they're bigger than the glorified tweezers Vic puts on SAKs, they're about the smallest you can get in "real" pliers. The knife is uncomfortable, and prone to mess due to the "speed holes". The bit driver is probably the best thing on here, and I do appreciate the internal storage. I know a lot of people mod out the second bit to put in a pair of scissors or something. Do that and swap in the double ended Phillips/Flat bit as the one in your driver and you'd do pretty well for the kind of light duty this is designed for.
I awlso added a 3d printed striker to the bottom of mine. I've seen other, more elaborate, add ons, but this one was cheap and functional.
Overall, "how small can get get a knife and real pliers?" is a fair question, and Leatherman took it a step further with the bit driver. Unfortunately, a tool with so few implements can't really afford to compromise on their quality, and the knife and pliers don't perform here.
I think there is room for this to work (comfier knife, add a second tool in place of the bit, make the "butt tool" official instead of 3rd party) but it's only about halfway there right now. Maybe a Skeletool +Alpha will come along someday.
OOTB 3/10, moddable to about a 6/10. If you really, really, need the smallest "real" knife/pliers multi I guess this is it.
Nice write-up; I generally agree with your assessment!

-
@WECSOG said:
Big fan of the Case '65s. They're good for the Giants of June Challenge. One of these days I plan to get myself a single blade '65.Yes, the 65s are serious tools. I’d argue they are capable of just about anything that might reasonably be expected of a folding knife.
In addition to the obvious reductions in weight and bulk vs.comparable two-blade models, the single-blade 65s are extremely easy to pinch open.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login