Knipex Kraze
-
@Steelej1976 said:
Do any of you EDC the Knipex Cobra pliers? If so why those over a different type?I EDC the small ones as an urban EDC.
You are right, not really worth it, more if you need wire cutting.
I think the idea is that if you want to carry only a small EDC, you can add some small Knipex to have pliers in it.
These very small knipex don't really allow you to turn big nuts, only small ones. The 125 are more real and give you good service.What's the the thing?
Quality is really good
You do have pliers service even with the small ones. No gimmick, these pliers grab and turn.
But, with the very small ones you can only turn small things and with the 125 ones you are not carrying that smallSo? Good side tool if your main is a swisschamp. Not really worth the price and likelly you will not use it that much. Good but questionable.
If you need wire curtting you are much better off with some powerpint.
-
I don’t usually EDC any kind of pliers, but do use them quite a bit for DIY. Have a bunch of Knipex as they are the best I have found for a reasonable price. As others have noted, you have much more utility with 125mm+ sizes and almost all of my usage has been with those.
I do have 110mm Cobra and pliers wrench in a small travel toolkit that I take on holiday etc, which also has a Spirit in it that covers off wire cutting. I have not used them a lot, but from my limited experience they can do a bit more than they look as if they could. The main limitation for me is the amount of grip and leverage you can get with such short and thin handles. The larger models are vastly better in this respect, of course.
My favourites and most used are the 125mm pliers wrench and the 145mm combi pliers. The latter are the most direct substitute for the kind of pliers you get on a typical pliers-based MT, and I certainly prefer using them to any of my MT pliers.
-
Not an EDC, but I have the small black pliers as a part of my bike toolkit. Never needed them yet though... :D
-
I recently picked up a Klein pliers wrench at Lowe’s. It’s about 6” long, so too big for my pockets. But it’s a great size for the backpack I take to work.
-
@fullbreakfast said:
I don’t usually EDC any kind of pliers, but do use them quite a bit for DIY. Have a bunch of Knipex as they are the best I have found for a reasonable price. As others have noted, you have much more utility with 125mm+ sizes and almost all of my usage has been with those.I do have 110mm Cobra and pliers wrench in a small travel toolkit that I take on holiday etc, which also has a Spirit in it that covers off wire cutting. I have not used them a lot, but from my limited experience they can do a bit more than they look as if they could. The main limitation for me is the amount of grip and leverage you can get with such short and thin handles. The larger models are vastly better in this respect, of course.
My favourites and most used are the 125mm pliers wrench and the 145mm combi pliers. The latter are the most direct substitute for the kind of pliers you get on a typical pliers-based MT, and I certainly prefer using them to any of my MT pliers.
I quite fancy getting hold of one or two pairs for travel and home use.
Any recommendations for where to buy them in the UK?
I have found them in a couple of tool websites, but got a bit lost in the reference numbers and variations.
-
@Crunchie64 said:
I quite fancy getting hold of one or two pairs for travel and home use.Any recommendations for where to buy them in the UK?
I have found them in a couple of tool websites, but got a bit lost in the reference numbers and variations.
You can buy Knipex on Amazon UK which is where I got most of mine. I have also bought one on eBay which is a bit riskier!
-
@Crunchie64 said:
…got a bit lost in the reference numbers and variations.Not saying “buy from there” (not even sure if they ship to the UK), but this site has some handy charts to help figure out what model numbers you want:
Knipex Cobra XS Pliers | Knipex at KC Tool
Knipex Cobra XS 4" pliers Only 100 mm in length but still grips like a big tool! Gripping capacity: 28 mm (1"), width across flats up to 24 mm Box joint: hi...
KC Tool (www.kctool.com)
Knipex Pliers Wrench XS | Knipex at KC Tool
Optimum accessibility, even in confined spaces: particularly compact design, very slim head Enormous gripping capacity with a tool length of only 100 mm; par...
KC Tool (www.kctool.com)
-
Thank you both.
I wasn’t sure if Amazon could be trusted, or if resellers would be trading in counterfeit tools.
Based on the links, certainly plenty of options to pick from!
-
@Crunchie64 said:
Thank you both.I wasn’t sure if Amazon could be trusted, or if resellers would be trading in counterfeit tools.
Based on the links, certainly plenty of options to pick from!
The ones I got from Amazon were legit, but it pays to be careful. I would stick to ones sold by Amazon directly rather than others selling via Amazon.
-
Coincidentally I just now got an email from Heinnie Haynes saying they are now stocking Knipex. A much better place to shop than Amazon for anything they carry. So I would recommend buying from them if they have the model you want.
-
I was going to object to the above, but then remembered that you are talking about the UK.

-
I’ve got the Heinnie email too, so I think that settles it.
Going to be ordering very soon.
-
I've used knipex most of my working life and have quite the collection. Never thought about EDCing a pair outside of work until I got the 100mm cobras in a secret santa one year. I carried them for a bit while working around my parents farm. They now have a permanent place in my work pocket EDC. They're used for the applications that the needle nose multi-tool pliers don't do. I was thinking of trying the 160mm Twin grips as a carry in place of a plier based Multi-tool,but think I'd miss the needle nose pliers. I've used them for everything from extracting broken keys, taking the nut off of camlocks, crinping connectors in a pinch when the vans been too far away to get a crimp tool, removing broken screws, bending and straightening things-the list goes on. If you don't need wire cutters often in day to day life then I can see why they would be preferred over needle nose or combi pliers
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login