Combo Edge 30 Day Challenge: 2-1-26 to 3-2-26
-
@AzteCypher said:
Hope you feeling better LC. I remember when my wife had a root canal. She was not a happy camper.
~Well, two weeks prior I was not happy either! Apparently the root died on the tooth and an infection set in the involved my lower right gums and jaw. 10 days of some heavy dosage antibiotic knocked the infection down after a couple of days and cleared it up the pain I experienced. Then continued the meds till gone. Just coincided with the scheduled ROOT CANAL. WHICH I SURVIVED! Temp cap and next step the fitting for a crown and gin repair.
What knocked me on my butt was an intestinal flu, requiring immediate attention every 60 minutes or about. Like a cleanse of sort, in which you can not ignore. I think I slept pretty much Wednesday after thru Thursday, heeding those urges the first 12 to 15 hours. I have not had this type of sick for 8 or 9 years and I was flying solo this time.
I truly appreciate your concern as I have survived this test at my advance years so to speak.
Not my first root canal either🤪 this was a tooth with a single root stem. Piece of cake with numbing.
-
@LoopCutter said:
Well, two weeks prior I was not happy either! Apparently the root died on the tooth and an infection set in the involved my lower right gums and jaw. 10 days of some heavy dosage antibiotic knocked the infection down after a couple of days and cleared it up the pain I experienced. Then continued the meds till gone. Just coincided with the scheduled ROOT CANAL. WHICH I SURVIVED! Temp cap and next step the fitting for a crown and gin repair.What knocked me on my butt was an intestinal flu, requiring immediate attention every 60 minutes or about. Like a cleanse of sort, in which you can not ignore. I think I slept pretty much Wednesday after thru Thursday, heeding those urges the first 12 to 15 hours. I have not had this type of sick for 8 or 9 years and I was flying solo this time.
I truly appreciate your concern as I have survived this test at my advance years so to speak.
Not my first root canal either🤪 this was a tooth with a single root stem. Piece of cake with numbing.
Norovirus infection, I reckon. The antibiotics made it feel worse by killing the good bacteria.
Take some probiotics and yogurt with “active cultures” and you should be right as rain.
-
@ElevenBlade said:
Norovirus infection, I reckon. The antibiotics made it feel worse by killing the good bacteria.Take some probiotics and yogurt with “active cultures” and you should be right as rain.
I was thinking along the same line! The antibiotics were stronger than normal and had completed them two days prior. I started my yogurt back up on Thursday. Stabilized later in the day after catching up on sleep.
-
Day 7
CRIMSOM combo edge looks ready to take a bite!
[attach id=0 msg=2562995]

-
Day 7
Just a quick check-in for me, and only a glamour shot of the USCK with one of my favorite seasonings.
[attach id=0 msg=2563036]

-
-
^. Very nice looking knife! I can see how you were tempted, as I too am attracted to lockback knives.
Day 8
Woke to falling snow and a balmy 16°F this morning! 🥶
With coffee in my mug I selected my GERBER Air Ranger to be clipped inside the right Jean pocket. And, I also wanted to share (imho), a well designed combo knife in a larger frame, another GERBER. I believe four of my Combos are GERBER MADE plus two MTs
[attach id=0 msg=2563085]
The AIR RANGER, this model was an always on sale item at GANDER MOUNTAIN stores in the day, varying between $14.99 and 18.99 each strategical placed in sale baskets around the store. Bought several and would give to newbies working with me, if I thought they could properly handle a sharp tool.
The BG HUNTER folder was just one of several models made. Found this marked down after the holidays. It is well made but what I like besides the size is the larger SE section of the blade. It is more than a 1/3 of the blade, would be better if half (imo), but it is still good.
Not a lot of plans to cut things up, today, but best to be ready.

-
We had a high of 78°F over here. Tell you what, we'll split the difference. I'll send you 31° of warmer weather and you send me 31° of cooler weather. Deal?!

<u>Day 8</u>
Using my Wenger Highlander this week. Made short work of cutting open my son's allergy meds.
I wish we had a Menards down here. I'd like the variety.
-
D E A L !Your HIGHLANDER is an interesting knife, I do not know why, yet the partial SE is interesting.
I have SE Spartan but it is a full SE, and is great for opening letters.
-
Day 9
My carry today is a special CASE COPPERHEAD, with 2 blades, a SMKW exclusive when the Copperhead was a vault pattern release.
[attach id=0 msg=2563246]
[attach id=1 msg=2563246]
Also, a MP400 within reach. Already sliced and diced cardboard for recycling earlier but picture lost do to site problems apparently so reposting my day 9!!!

-
Mini Challenge Announcement.
On Day 10 -
** Two is One, One is Enough **
When the Leatherman Supertool and the Gerber MP 600 were released, they had separate serrated and plain edged blades. It was no surprise to me that when the PST 2 and the Gerber MP 400 were released that they decided to save real estate by using a combo edge blade.
Post a picture of a multi-tool that has a separate plain edge and serrated edge, along with a combo edge tool that you are using for the challenge. Comment on which tool excels for which purpose.
-
@AzteCypher said:
Using my Wenger Highlander this week.
@LoopCutter said:
My carry today is a special CASE COPPERHEAD, with 2 blades, a SMKW exclusive when the Copperhead was a vault pattern release.Beautiful bones on that one!

@ElevenBlade said:
** Two is One, One is Enough **Challenge accepted!
Day 8 (catching up)
Since Gordon likes lockbacks, here's a Gerber.
[attach id=0 msg=2563261]
Day 9
Interestingly, the Gerber has a half-stop.
[attach id=1 msg=2563261]


-
Very nice, half stop too!
-
@Farmer X said:

Beautiful bones on that one!
Challenge accepted!Day 8 (catching up)
Since Gordon likes lockbacks, here's a Gerber.
[attach id=0 msg=2563261]
Day 9
Interestingly, the Gerber has a half-stop.
[attach id=1 msg=2563261]
In last month's Black Out challenge I used a Gerber LST which had a half stop. I really enjoyed using it because the half stop gave me a sense of security when closing it.
-
-
Day 10 + Mini Challenge
Yes the ST300 was my first WORKING MT. Loved the two different blades on it, actually allowing my to just carry a 58mm Vagabond for its orange peeler and nail file😏
But, then I was introduced to the REBAR, a smaller version of the ST300. 😇
I have multiple flavors of the REBAR, any of which are always within reach at home or in my vehicles.
Post a picture of a multi-tool that has a separate plain edge and serrated edge, along with a combo edge tool that you are using for the challenge. Comment on which tool excels for which purpose. ]
[attach id=0 msg=2563336]
My first REBAR! 😘[attach id=1 msg=2563336]
A contrast of three users, displaying a blade of each CUT😉The PLAIN edge on a job site or now at home with domestic tasks, excels at cutting patterns, opening packages for food prep, slicing paracord cleanly, or separating those plastic retainers of clothing tags or matched socks.
The REBAR’s Serrated blade, serves great cutting cardboard to smaller sheets for recycling, or even cutting with or against the corrugated ribs. The edges are dangerously sharp, and it is easy to slice deeply, more deeply than intended, plus of skin tissue is involved can be much more painful that a PE cut. The SE easily separates twine or stranded rope from one piece to TWO.
CUTTING BAILING TWINE, is another speciality, a one pass movement with little effort. A REBAR is always on my belt when visiting a friends farm-stead, as there is always a cutting tasks I can do better than his CASE TRAPPER or VICE GRIP 🤫The SIGNAL’s COMBO EDGE is a very good compromise. This accompany me on hikes and trail work I volunteer. The edge will cut stringy vegetation, heavy twine for marking off limit trails or guide lines to keep folk out of the marsh and on high ground (sometimes!)
Overall my preference is always a blade that is either a PE or SE over a combo style. And especially if the same handle has a blade with one of each, as my REBAR.


-
Interestingly, the Gerber has a half-stop.
Another note I concluded, as having a half stop, this GERBER IS NOT designed for quick blade deployment. No thumb-stud, or inbuilt flipper tab on the back side. It appears to be pinch deployed style.
This makes the half stop most practical! 😎 -
I also, wanted to point out that as ElevenBlade noted, LEATHERMAN did conserve handle real estate by incorporating a COMBO EDGE BLADE, they also did it correctly in my book, as the SERRATED EDGE, utilizes almost half if not more of the blade’s cutting service, making this blade fully functional regardless of the tasks it is assigned, 😎🎉

[attach id=0 msg=2563343]

-
@LoopCutter said:
Another note I concluded, as having a half stop, this GERBER IS NOT designed for quick blade deployment. No thumb-stud, or inbuilt flipper tab on the back side. It appears to be pinch deployed style.
This makes the half stop most practical! 😎I noticed the same with the Gerber LST. There's no nail nick. Its a pinch and pull
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login









