Soldier On! 2026
-
@LoopCutter said:
Your Army models seem to fetch a higher price on the resell market than my OHT.I guess that's true, but only in certain cases do I feel it's justified. Both Knife Center and DLT Trading offer the current issue model, so unless you find a good deal on a used one or you're after a specific year, I'd take that option. One of them has the USCK at one time, but they didn't show in a recent search.
Day 19 (catching up)
The cap lifter will be a part of a future Sub-Mission.
[attach id=0 msg=2564355]
Day 20
And the awl should see some action very soon.
[attach id=1 msg=2564355]


-
Agree w/ stropping vs sharpening, especially on a soft steel like Vic's. When I do need to sharpen, I tend to go with a finer stone than I would use for a lot of other knives.
D+19
I promised a pen pic, so here we go. Kaweco Brass Sport to go with the brass liners. Very nice pen (particularly for the price compared to some others). Thinking about picking up another Kaweco (Supra?) since I like it so much.

-
@LoopCutter said:
Sharpening removes steel and over sharpening can thin the edge, then when cutting the blade will feel dull because the edge rolled over.I prefer STROPPING, a blade when it feel’s doggy.
You strop against sturdy card board, to rough side of a leather belt with blade being pulled with the edge away the direction. Where you sharpen a blade with edge forward.
@BPRoberts said:
Agree w/ stropping vs sharpening, especially on a soft steel like Vic's. When I do need to sharpen, I tend to go with a finer stone than I would use for a lot of other knives.Do either of you strop without paste? I've always just used the leather and the felt/cotton on the back. I've never used the stropping compounds but now feel as though I may be missing out. I can't seem to get my SAKs as sharp as my other knives and I'm not sure whether that's the chromium or the technique... This is one of the strops I use (it's actually my axe strop but seems to work just fine for knives).
Editing to add: That's a very cool pen BPRoberto!


-
@Tuisto said:
Do either of you strop without paste? I've always just used the leather and the felt/cotton on the back. I've never used the stropping compounds but now feel as though I may be missing out. I can't seem to get my SAKs as sharp as my other knives and I'm not sure whether that's the chromium or the technique... This is one of the strops I use (it's actually my axe strop but seems to work just fine for knives).Editing to add: That's a very cool pen BPRoberto!
Yes, I do not use paste. I started to practice stropping with a my harness leather work belt, using the unfinished side to strop my BUCK 112 420HC steel at night while sitting in a hotel room when traveling for work. Found my blades felt sharper and lasted longer.
Carried the practice with any blade I use, and felt my VICTORINOX KNIVES benefited the most routinely stropping after hard use.
I have one strop board, I picked from the SOS24 traveling box, that had compound on one side. (Used) But I have not yet purchased compound as of today.
-
Day 20
Used the driver on the bottle opener to tighten the toilet seat screws. Didn’t think anyone would want a picture of a toilet so you get the bathroom conter pic.
-
Day 21
[attach id=0 msg=2564395]Trooper with a Schrade hone steel. I nabbed the steel out of the Sos Mystery Box. I have used it on Opinel knives that had edges which were rolled, but mostly on carbon steel kitchen knives. I use whatever knife I am carrying if a blade is needed. For planned tasks, I generally get out a Stanley utility knife and let that get the wear and tear. Best wishes. G
-
Day 20: Vanity pic with some liquid rocket fuel ⛽☕☕

-
@Tuisto said:
Do either of you strop without paste? I've always just used the leather and the felt/cotton on the back. I've never used the stropping compounds but now feel as though I may be missing out. I can't seem to get my SAKs as sharp as my other knives and I'm not sure whether that's the chromium or the technique... This is one of the strops I use (it's actually my axe strop but seems to work just fine for knives).Editing to add: That's a very cool pen BPRoberto!
I have the same (or a very similar) strop. I do not use paste. I have in the past, but the effort of cleaning/refreshing it doesn't seem worth it to me. I'm not performing surgery, I don't need a micron edge.
-
Honestly, the litmus test for me is can it cut through my apples without crushing them but not be so sharp that cutting through the appleseed blunts the edge. But I've honestly had a heck of a time trying to sharpen stainless. I think it's almost like a different skillset. Gary, what is a honing steel?
-
@Tuisto said:
Honestly, the litmus test for me is can it cut through my apples without crushing them but not be so sharp that cutting through the appleseed blunts the edge.
~I determine sharpness of a blade by how much noise it makes slicing a piece of paper.
The more noise, the more ragged the cut.
Or, if you some cut yourself, but do not know it until you see a trail of blood, or smearing on your clothes.
A no feel cut is damn sharp. -
@Tuisto said:
Honestly, the litmus test for me is can it cut through my apples without crushing them but not be so sharp that cutting through the appleseed blunts the edge. But I've honestly had a heck of a time trying to sharpen stainless. I think it's almost like a different skillset. Gary, what is a honing steel?Same idea as the butcher's steel. It doesn't have teeth like a file. Very hard surface with longitudinal scratches. The Schrade type has a chisel on one end for splitting deer pelvis bones. Whack it with a branch. Buck used to make something similar years ago. Not a diamond impregnated surface and doesn't really remove steel. It will remove rust from the edge of a carbon steel knife. I use it mostly in the kitchen.
If your knife has never had the correct angles cut into the blade or is completely rounded off, it wouldn't be if much use. If you need to bring back the edge on something, like in the middle of processing and skinning a deer or two, it is good for that. The blade is pulled backward like using a strop, instead of cutting forward into a sharpening stone. The leather of the Schrade sheath would be useful for fine tuning an edge also. Best wishes. G -
D+20
Picked up a 1957 Schwinn Panther today. Soldier is looking for some screws to turn. "Let me at it!" he says.

-
I used the Soldier to open a package from SOS24. It's a great model at a great price!
I'm editing this to add that I think I may have found a model that deals with the issue I had with the Hunter (I didn't want a saw in mine). There's apparently a model called the Parachutist, which has three layers: main blade, large gutting blade, opener layer, with a backside philips. Although it looks to be discontinued. Crap and I forgot to add day 20

-
Picked up a 1957 Schwinn Panther today. Soldier is looking for some screws to turn. "Let me at it!" he says.
Very nice!
The seat looks I. Excellent condition.
The chrome should clean up great as well.Will love to see it put together.
I restored many Schwinn road bikes a few years ago when I was between jobs. Still have 5 or 6 in storage that I could part with.
-
As you both know, there's a big difference between the classic Schwinn's and the new versions. I had a newer one. It looked like the older one but that's where the similarities ended. You can't beat original heavy metal!
-
Hey all, I think I am going to bow out of this challenge.
I seem to have just a little too much going on right now
-
I was going to try to make this one the full term, too, but I think I'm going to go at 30 days. There's a lot going on right now, and I don't want to half step it.
In the meantime, that wonderful hook cutter helped me take the plastic seal off a jar of peanut butter. These seals drive me crazy

-
Anything that keeps a chap from his Peanut butter is a problem Barry

-
Man, I just love seeing that small gutting blade... Such a unique (for Victorinox) and cool little blade. Does it lock in place?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login