Combo Edge 30 Day Challenge: 2-1-26 to 3-2-26
-
-
Day 20 + Mini Challenge
The mini was a real challenge to me, so to properly handle I selected two combo knives for this day and then changed up my plans, taking a hit for the team😉
Last night, a trip to a food store searching for my favorite breakfast bread, I found the deli was running a promo for a Bristo meal, a protein plus two sides for $5. Broiled steak strips and broccoli slaw, and a broccoli/apple salad.
My meal for either lunch or dinner depending how long my doctor’s visit runs.🥺My Vic OHT was knife number 1, I like the SE and its position on the forward part of the blade.
The other, my OPINEL No8 Outdoor. The Combo blade is more traditional and with the PE at the forward position allows for the best comparison on what ever I would cut if against a hard surface or cutting as a rip saw motion.
The first comparison, cutting man made material. The container, plastic containing the food, seperate lid from the base so the lid can be nested underneath.
Both knives had no issue, using the tip or the heal, no matter the SE or the PE. 👍👍👍👍, max score.
[attach id=1 msg=2564467]
Then, cutting natural material. STEAK, tender juicy steak!
[attach id=0 msg=2564467]
Both blades cut meat with no issues just as I suspected.
👍 OHT. 👍 Opinel.I can only admit, this was a tough challenge and I suffered through as tough as it was. Whew


-
Mini Challenge Announcement.
On Day 25-
** The Original Multitool**
For many of us a combo edge was our first introduction to pocket tools. And some of us weren’t the sharpest tools in the shed

I don’t mind admitting that I used my folding knife for some things that it wasn’t meant for- scraping, tightening screws, prying lids… locking bathroom stalls that have broken bolts

Post a picture of your combo edged tool being used in a non-standard way. Be safe, and don’t do anything that could cause injury

For a bonus mini challenge: post the favorite picture you have taken this month on the Combo Edge Cooperative thread, linked below
/topic/85419

-
@LoopCutter said:
Day 20 + Mini ChallengeThe mini was a real challenge to me, so to properly handle I selected two combo knives for this day and then changed up my plans, taking a hit for the team😉
Last night, a trip to a food store searching for my favorite breakfast bread, I found the deli was running a promo for a Bristo meal, a protein plus two sides for $5. Broiled steak strips and broccoli slaw, and a broccoli/apple salad.
My meal for either lunch or dinner depending how long my doctor’s visit runs.🥺My Vic OHT was knife number 1, I like the SE and its position on the forward part of the blade.
The other, my OPINEL No8 Outdoor. The Combo blade is more traditional and with the PE at the forward position allows for the best comparison on what ever I would cut if against a hard surface or cutting as a rip saw motion.
The first comparison, cutting man made material. The container, plastic containing the food, seperate lid from the base so the lid can be nested underneath.
Both knives had no issue, using the tip or the heal, no matter the SE or the PE. 👍👍👍👍, max score.
[attach id=1 msg=2564467]
Then, cutting natural material. STEAK, tender juicy steak!
[attach id=0 msg=2564467]
Both blades cut meat with no issues just as I suspected.
👍 OHT. 👍 Opinel.I can only admit, this was a tough challenge and I suffered through as tough as it was. Whew

Nicely done.
Interestingly… the other inspiration I had when coming up with this challenge was from cutting meat that has been trussed with butcher’s twine. I was cutting it up on a camping trip. Not only was it getting dark in the evening, but cooking it outdoors had caused it to puff up and I couldn’t find the butchers twine so I couldn’t cut it off first. So as I sliced through the meat I would get caught up in the twine.
If I hadn’t been using my skeletool it would have been a bit more difficult.
-
Day 21
Packages inbound per USPS informed delivery service containing 3 sharps.
The BLUE SIGNAL is on standby…
[attach id=0 msg=2564550]
Just need to convince it to allow me to fold the blade back while we wait!

-
Package one, SIBNAL had no issues beside tape residue, and found this YELLOW SPARTAN wrapped securely inside.
[attach id=0 msg=2564573]
-
And, package 2, same seller!
WENGER HIGHLANDER Serrated main blade, like a small Tinker.
And, a 58mm RUBY ROVER, with small flat blade combo tool.[attach id=0 msg=2564574]

-
Kudos to AzteCypher for the tease😎.
Just had to check out the WENGER wicked (combo) edge for MYSELF!

Thank you my friend! -
Day 20 (catching up)
Right tool for the job mini-challenge
The job was cutting a piece of elastic cord that was preventing me from wearing some new boots. Both edges did it equally well. My experience has been that serrated edges are best on thick synthetic line (that's Sailor-speak for rope), but plain edges work better for me in all other jobs.
[attach id=0 msg=2564588]
Day 21
The USCK is posing with a friend.
[attach id=1 msg=2564588]


-
Yesterday was a rough day so apologies for the late posting. I'll explain more in a bit.
<u>Day 20 - ketchup</u>
Mini Challenge
For the man made material I cut the tape off this box. The PE cut right through it like a hot knife through butter. The SE did cut it but it did leave a jagged edge. PE wins on this one.For the natural material I cut into an orange from my dad's orange tree. Having the PE and SE both on the same blade actually helped. The PE got me started into the orange and the SE made short work of cutting through the rest.
What about the rough day you ask? Work wasn't too bad actually. But were were hosting a 10 girl slumber party for my daughter's 10yr birthday. I'm not sure that was the wisest decision even though mife wife had a friend helping.

My son had opted to stay at a friends house so he wouldn't have to deal with the shrieking. I went to drop him off, then I picked up some dinner for the wife and I. When I got back my wife told me she might've broken her toe. :oTurns out one of the little girls was running through the kitchen when she slipped, landed on my wife's toe with her knee, which then caused her to slide into the stove, shoving my wife's toe under the stove. Her toe was purple. My wife kept going but you could tell she was in pain. The rest of the evening involved shrieking and laughing girls until they settled in for the night. Girls went home by 9am today so we re-checked my wife's toe. It was black purple now. I told her we needed to take her to one of the emergency clinics to get her checked out. She wanted to take the kids to their soccer games first and then go to the clinic.
After the games we took the kids home while I drove my wife to the clinic. My son's 13 so he's pretty responsible now. After the x-ray it was determined that it wasn't broken just really beat up because of the girl's knee landing on it and then being shoved into the stove. We have her big toe taped to her next toe and she's wearing a boot to stabilize her foot more. Ouch...
-
Always happy to help "encourage" a friend LC!


-
Thought this group might enjoy a pic of my Vic Skipper.
It’s a fantastic tool set, but at 6.3 ounces it’s unfortunately heavier than I want to carry around.

-
That is a handsome main blade!
I really enjoy the combo blade on my OHT!
On a SKIPPER, that can be an advantage.
You should share a color picture, as imho, the blue camo looks very good on any 111mm
My bad, it is a color picture, just darker.
-
Day 22
My first Skeletool was gifted to a favorite hotel clerk who had moved and was assembling furniture at a new apartment. I carried inside my jacket’s vest pocket but will admit it was not a big fan.
This SKELETOOL was purchased a year or so later but was just broken free from packaging got this challenge 😉
[attach id=0 msg=2564658]
The colorful CX models came into my house around the holidays. Taking advantage of LM sales events. 😏
The SkeleTool will see pocket time through the day and expect to assist with evening meal prep!

-
@nate j said:
Thought this group might enjoy a pic of my Vic Skipper.It’s a fantastic tool set, but at 6.3 ounces it’s unfortunately heavier than I want to carry around.
I’ve always wanted the blue camo scales on the skipper so I can put them on my OHT. The listing I had seen on the ‘bay were always sketchy. Maybe I will check again. -
@LoopCutter said:
Day 22My first Skeletool was gifted to a favorite hotel clerk who had moved and was assembling furniture at a new apartment. I carried inside my jacket’s vest pocket but will admit it was not a big fan.
This SKELETOOL was purchased a year or so later but was just broken free from packaging got this challenge 😉
[attach id=0 msg=2564658]
The colorful CX models came into my house around the holidays. Taking advantage of LM sales events. 😏
The SkeleTool will see pocket time through the day and expect to assist with evening meal prep!
I gifted my first Skeletool without even opening the box. I was camping with a friend who needed a multitool for something. I had a SAK in my pocket and the skeletool new in the box in my backpack. So I took the opportunity to indoctrinate my friend into the world of multitools.
I had already had the Skeletool KBx that I had been using, and liked it so much that I bought two KB models along with the full version that I gave away.
I totally understand wanting to get a new one for myself, after parting with the old one… but I have been able to hold off since I don’t use pliers much. Other knife-based multitools… that’s another story.

-
Day 22
Here's the USCK with what may or may not qualify as a combination tool.
[attach id=0 msg=2564690]

-
-
<u>Day 22</u>
Breaking out the Winchester.... knife with PE and SE. Used it to cut down a rubber hose for the float in our downstairs toilet.
It's a pretty knife but the fit and finish isn't there unfortunately. I learned later that it's originally part of a nice boxed set. The liner lock wasn't engaging all the way. I couldn't remove the pivot screw to try and file down the edge of the liner a bit. Feels like they used really cheap screws and red locktite. I ended up filing the end that meets the liner lock so that it would fully engage. It's actually sharper than I expected but we'll see how long that edge lasts.
-
Day 23
Preparing for the day, my CASE COPPERHEAD is riding in my pocket. The combo blade has not ever let me down, but me a couple times but cuts when required.
Paired with my BOND. The pliers handle gripping tasks that my fingers now fail with🥺
[attach id=0 msg=2564812]
We are on the home stretch, and I will most likely return awl but a couple of my combo blades to their storage cases and ride out the month with my favorites.

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login







