Monday Bonday !
-
I ought to save at least one pack of crackers for the Gas Station MRE challenge. Maybe not. Best wishes. G

[attach id=0 msg=2561416].jpg)
-
Happy MONDAY BONDay!

Mr BOND was curious why we were not venturing outside.
Explained the 6° F temperatures and just got a look 🥺
Then gave it a view out the back door…
[attach id=0 msg=2561429][attach id=1 msg=2561429]
Just a whatever



-
Monday BONDay

No sun here!
So no shadow!!! 
[attach id=0 msg=2562385]
My BOND is being paired with a COPPERHEAD, a very pretty one at that fitted with two combo edges. Beauty and a bite!😎
Have a great MONDAY!

-
Monday BONDay
My Norman Rockwell calendar shares a glimpse of hope in MARCH depicting an April 1 setting with a chap prepared for what ever the world my layout for him.
The BOND and COPPERHEAD join the scene in progress and just want to fit in the fun.
[attach id=0 msg=2563202]
Stay warm!

-
Great pic, LC

-
MONDAY BONDay
Winter thaw in process, in my area. Car temp readout displayed 60° on way home from hospital testing.
[attach id=0 msg=2563993]
Combo blades above and below my BOND.

-
Nice. I will be back helping you 'bond' in a couple of weeks. Unless I get tangled up in another challenge of some sort. Best wishes. Gary
;) -
The thaw makes it even better! -
Monday BONDay
[attach id=0 msg=2564810]
The BOND, may be overlooked by several folk. For me it is an integral part of my MT carry rotation when responsibility is involved. I shared this thought of my logic in a REBAR discussion and felt it fits here as well.
The family;
SuperTool300 is the oldest and most practical!REBAR, a typical middle child, whimsical yet can be the most functional in any situation. Including being a cut up of any material needing reducing.
BOND, the little one, can take most anywhere and it behaves, but knows how to deliver if required.
Between the three, any are a wise choice to take with you anytime real work is required to be completed.
No need to impress, just get it done!
Also, these tools all can share the same bit kit I have set up. 😉
Have GREAT week!

-
I keep looking at these,but have not yet bit the bullet. Are they a light duty tool? I don't tend to carry a Multi-tool unless I'm at work but do like the classic design.
-
@TheNELocksmith said:
I keep looking at these,but have not yet bit the bullet. Are they a light duty tool? I don't tend to carry a Multi-tool unless I'm at work but do like the classic design.I would not consider it light duty, a WINGMAN, SideKick and Rev I put in that category.
The BOND is a non locking implement tool, the same size as a REBAR, but without the serrated blade and saw. Also, the plier cutters are not replaceable as the REBAR’s
The BOND is configured as the original PST! Just with updated tool set.
-
[attach id=0 msg=2565424]
Carrying a Bond today. I like the old school layout. It has loosened up about 50%. Still the stiffest L-man thar I own, but usable now. I like the blade particularly. Best wishes. G


-
One of our MTO members commented on the price increases for Leatherman tools. I decided to check out the Bond. Stainless Bond is $49.95 with the colorful models $10 more. Of course, that is without a pocket clip or sheath. I wish the tool had a grippier surface on the handles. These things are slippery as a trout. Haven't decided whether to put some kind of tape on the handles or not. That would work, but it would also look like smurf.
Best wishes. G

-

$49 and $59 for the color handles.
They were 59 and $69 a week ago and same at SPORTSMAN Warehouse about same time.
That is $10 reduction, most strange, and makes the BOND a super good bargain.
Just checked, AMAZON has reduced price too!

-
Monday BONDay
A sunny BONDay presently, chilly but sunny!
[attach id=0 msg=2565444]
A CADET is riding along today, a striking pair😎
Have a great week, awl!

-
I also noticed some other changes. Wingman is down to $49.95 ($20 decrease). The largely unloved Rev is now $44.95. Those are prices from the Leatherman site. I can't speak to the other changes, but there seem to be some others. Best wishes. G

-
Interesting, very interesting GARY

The BOND is even better tool at the new price point.
Wingman as well.
Something must be changing at LM, leaning toward their LIFESTYLE, theme they hinted when the WAVE ALPHA was released.
Steel availability could be another issue.
Imagine a BOND made with MAGNACUT or M390 or other powder steel blades. Over kill in my mind.
-
Monday BONDay

No better way to start the week, slip a BOND INTO YOUR BAG, your pocket, or sheath!
This is my kitchen BOND, serves as my finger extension to open plastic packaging, slicing envelopes of seasoning or just being a reliable needle nose plier when needed.
Here with my knife, a black CADET, coffee and a snack of sour cream donut holes…
[attach id=0 msg=2566045]Best wishes to AWL and a
for a great week!Attack it like a


-
I did some things outside, and dropped my Wingman in a pocket. I thought about carrying a Bond, but didn't go back to the house for it. I cut a small diameter coat hanger with the W-man. It did a poor job. I wonder if it would have cut a hanger with thicker wire. I had to squeeze the handles hard and wiggle them back and forth to execute the cut. I will try a Bond on the same wire and see how it does. It couldn't do any worse. Best wishes. G

-
While I was out today, I tried my Bond wire cutter on the same smaller diameter coat hanger wire. It cut better than the Wingman. At least I didn't have to wring the pliers back and forth to complete the cut. I am used to better wire cutters than what Leatherman provides. At least on their models without something like carbide cutters. The handles are uncomfortable when you put lots of pressure on them. Gloves or something would make it better. Like most of the Leatherman tools, they work when you don't have anything else handy but not first choice for work applications. Generally speaking.
There was a member on here who posted a photo of a L-Man with heavy stranded cable. The sort of thing used to brace a power pole. He said something about cutting them with his L-Man. It might have been a joke. King Kong couldn't have cut that multi-strand cable with any plier based multi. Probably just being funny. I've told some whoppers on here too.
I remember using a bolt cutter that was used to cut re-bar. The ancient thing was sitting on the ground under a shed. Bottom lever had wide iron feet that kept it from turning over or sinking in the ground. What you did was lean on the top lever (bottom lever was static, right). The top handle was probably 8 feet long. Measure off the length that the customer wanted and heave ho. I bet the stores now have some sort of abrasive power tool to do the same thing.
Best wishes. G

Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login