111mm Super Club
-
My second Hercules, even tho its used blade is sharp and tools snap nicely
[attach id=0 msg=2564515]

-
Mighty Hunter!

-
This is a very cool model! Honestly, a OHO version of this without the saw and with the Skipper Pro marlinspike would be practically my perfect 111. Although, I don't like the fact that it's a choice between the full-size cap lifter and the small gutting blade. If there were a way to get both of those in the same tool I'd jump on it. So, a full-size cap lifter, a small gutting blade, a OHO blade edge, and a Skipper Pro marlinspike (or maybe just a regular marlinspike — the Skipper Pro one adds a lot of width...). I don't think I appreciated the 111s enough but I'm really starting to love them. I don't own any of the 130mm models (yet), so the 111s are the largest I have with the exception of the Hunter Pro. Here's a photo of the width of the Pro marlinspike.


-
Wow - That marlin spike is a brute - And I had forgotten that it is liner-locking -
Although for that width and type of likely heavy usage - It would have to be- And of course the Wiki is correct!! ;)

That therefore makes three locking tools: Blade, Spike, Screwdriver - Which must be quite unusual
. - And of course the Wiki is correct!! ;)
-
Yeah, three out of the four frontside tools on this monster lock — three of five in total (since there's only the one backside tool, an awl). Honestly, I've been trying to think of a way that it would be possible to put the large marlinspike on the back of the tool. I'm sure there must be a way, but since it actually has three(!) backsprings, I'm not entirely sure whether it'd be possible. I really like it, though. It actually works very well as an icepick. The only issue with it is that the taper is actually so aggressive that it doesn't exactly do a great job untying knots made of thinner string; e.g. it doesn't work well for untying paracord knots. But then again it's been my experience that the standard marlinspike also doesn't do a great job at that. The best I've found is the scale marlinspike/sacking needle on certain alox models (like the Seaman, for example) or actually just the corkscrew — which is another reason I prefer the corkscrew to the backside philips.
-
My son has one and that Marlin spike is the real deal!!
-
@Tuisto said:
Honestly, I've been trying to think of a way that it would be possible to put the large marlinspike on the back of the tool.
I'm sure there must be a way, but since it actually has three (!) backsprings, I'm not entirely sure whether it'd be possible.Meet the ***British Army Knife *** made in the steel town of Sheffield in Yorkshire, UK.
This one has a 1943 tang stamp
The spike uses two springs and is about 9mm wide
-
Barry, it certainly is a beast of a marlinspike. And Huntsman, that is actually so cool. I knew that there were English army knives that had marlinspikes but I absolutely love the shape of that blade. I have a few straight razors from Sheffield; I know that at one point some of the best steel items in the world came out of Sheffield. Does that one have a specific name?
-
Yep - Pretty sure it is called a British Army Knife!!

Just like the so-called *Soldier *is called a Swiss Army Knife!
I don't think Sheffield ever manufactured the massive variety of *Officer's Knives *- like those that Victorinox branched out into.
If you dig around MTo - You may well find some threads on these knives
-
@Tuisto said:
Honestly, I've been trying to think of a way that it would be possible to put the large marlinspike on the back of the tool.
I'm sure there must be a way, but since it actually has three (!) backsprings, I'm not entirely sure whether it'd be possible.PS. Firstly, curious as to why you would want to do this? ???

Secondly - It would be very hard on the Victorinox - You would have to completely redesign the frame, the springs, probably the rivets and the liners, plus the lock - So basically you would build the BrAK!!

-
Honestly, I mainly wanted it to be more akin to the shape of that British Army knife you posted. The large marlinspike is just so huge that it makes the entire body extremely wide for the number of tools it contains. And since there's only the awl on the back, I figured that it would potentially even allow for a saw/file/something else on the front side. I just thought it would make it a much sleeker tool. You know those really early prototype SAKs with the enormous parcel hook thingy on the back? I figured it would be something like that. So, in nuce what I wanted was to put it on the back so that it would be thinner, and so that an extra tool could be added, whilst maintaining the same width. I hope that makes sense.
-
Ah - OK - I see where you are coming from now
Basically you want a narrower SAK - maybe just the width of the marlin spike.
Well it's not going to happen on the Vic, for reasons above!But I have another one for you - It's a BAK design - But no tang or scale markings at all
I bought it within the last few years - I think from eBay - TBH - Not 100% sure how I came by (bay? ;)) it!!The SAK is a Waiter - So it's bit longer than the Waiter - Probably 91mm++ And more if you include the liner integrated SD - Same height as the Waiter - But obviously a lot wider.

-
That is a nice one! It's interesting to me that they all seem to have wharncliffe-y blades... I wonder whether that's a ship thing?
-
I thought I'd resurrecte this thread with an Outrider with slide-lock, my 1st 111mm.


-
This is a great thread, Here is my OHO Black
Fireman with black main blade.
[attach id=0 msg=2578322]

-
Looking good gents!
-
@TopRogers said:
I thought I'd resurrecte this thread with an Outrider with slide-lock, my 1st 111mm.
Noice!
@boiseuzj100 said:
This is a great thread, Here is my OHO BlackFireman with black main blade.
[attach id=0 msg=2578322]
That's really cool with the black blade!
-
Whelp, now I'm fascinated with the 111mm models.... I found a really nice Locksmith that has earned some pocket time today. After years of poopooing the 111's I now have two! Next on my list is a Soldier and maybe a Skipper Pro.

-
@TopRogers said:
Whelp, now I'm fascinated with the 111mm models.... I found a really nice Locksmith that has earned some pocket time today. After years of poopooing the 111's I now have two! Next on my list is a Soldier and maybe a Skipper Pro.Nice!
The Locksmith is one I've been watching for. 
-
Great recent posts chaps.
The Outrider is a fabulous model - Sorts out the Phillips vs corkscrew argument we always have for the 91mms

And that Fireman is spectacular.
I always thought it was a shame about the Locksmith - Seems like a useful toolset.
And a general pity that Vic are continually retiring models and reducing their range
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login
