Combo Edge 30 Day Challenge: 2-1-26 to 3-2-26
-
Day 23
Both edges made short work of this four-pack holder.
[attach id=0 msg=2564869]

-
-
Day 24
Planning my EDC for today, including a COMBO blade, took longer than selecting a shirt or which coffee to brew!

Two combo fitted tools made the grade;
[attach id=0 msg=2564920]
My PST II, for its pliers and efficient cutting blade. And, a new to me WENGER HIGHLANDER!
My dear friend AzteCypher, tempted me one time to many, so I sniffed one out and bagged it.
Today I will check it out. A 84mm with backside Phillips will replace my SPORTSMAN today.Yes, you can say it! I have a problem


-
Don't forget tomorrow is a mini-challenge for Day 25
-
-
Day 25 + mini challenge + favorite picture to another thread.
This mini was a tough one for me. I had been taught to always treat a knife with respect. My fix blade farm knifeās I sharpened from a blank and put to scraps of wood and shaped the handle were crude, put served me well. In fact my first pocket knife a Japan trapper, with its two blades is still with me from the summer I was 8 yo and snuck to a small village about five miles away on my bike and bought still is in working order. It cleaned rabbits, pheasants I hunted after school, muskrats I trapped on my grandparents drainage ditches, and CC leaned many a fish caught during the summers and winters ice fishing on SATURDAYS with my DAD. Considering that I am now 72, were are approaching 64 years of service.
I will admit, combo edges I thought were novelty items sold as tactical gear. I have changed my opinion, they are practical in some situations and I have about a half a dozen about with 2 favorites for my current needs.
But last night I did recall a time I did use a tactical combo blade incorrectly, I believe it was fate I even had it with me.
Part one. I was working my parking construction gig, installing a gate control panel for semis drivers to access a processing plants loading and unloading docks. It was mid winter, JANUARY thaw, snow was fading fast and walking to the dock doors to use the facilities I found a knife in the mud. Put it in my work coat pocket and did my business, then back tracking through the lot I find another knife, maybe the same area, it too caked with mud and ice as it was packed under the edge of a snow pile. Tossed both items into my truck by the tool box.
Finished the job and while. Customer tested and request codes to be entered I examined my finds. Both were wet, put almost identical truck stop tactical style knives. One had a plain edge (pictured), the other a combo se edge.
They cleaned up nicely, no markings, no model number just no descript knives.[attach id=0 msg=2565048]
PART TWO - Fast forward a month or two, spring is in full swing, a Thursday afternoon 200 miles from home base, been on road since Monday morning, hoping to head toward Indy for the night and some PM WORK. I get a call that there is potential new customer with unknown gate access issues near by the university I just completed my work.
I ventured that direction and met the home owner, actually the ESTATE OWNER! The front gate was a double lane access style, and appeared to have no issues as I past through. The owner in a golf cart says follow meā¦
About a half a mile in the back is a second gate, single lane, swing gate, in the open position. I learned that it was installed last fall, been giving him fits and now will not close and the form that installed is no longer welcome back. Gave me the keys and said can you fix or tell what I need to do.Inspecting I discovered quickly that a safety loop was open, sensing a vehicle was present preventing the gate from closing. Not an easy fix, about 4 hours of work cutting a new loop in the pavement. Took pictures sent to office to send the customer a quote and schedule. In the time it took to put everything together and power down the gate, apparently the wuote was emailed to owner. He drove back out to me and wanted more of an explanation. So I give him an education.
OK I need this fixed asap. I explained I did not have my concrete saw and blades with me. May be possible to rent one if there was a HOMEdepot or LOWES with one two rent. And blades I can buy. That will increase the quote total. Then said well go get your gear and come back SATURDAY!!! I can wait the two weeks the quote says. I am in a pickle, my anniversary was that SATURDAY, our fortieth. Kids planned a party.It was already 4pm. Took the covers off the controller, traced wires to a conduit, snaked it and popped out on the edge of the drive. Dug with a screwdriver and found the conduit but more importantly the loop wires and brushing the blacktop found the loop cut and then the entire loop that had been sealed after installation.
Told the owner, I may be able to cut out the present broken loop and not have to cut a new loop. It will take longer but if goes as planned I have it working by tomorrow. But it will be T & M and the quote will not apply. Plus my expenses for tonight. He approves.
I went to work. The big problem was the installer used size 18 wire not 14. So pulling it out by hand was not going to work, plus instead of three turns they used only two turns.
The found knives come to mind, I am going try cutting the loop sealant from the asphalt. Will ruin the blades no big deal. By seven pm the COMBO BLADE folder was
Beat to heck, had cut sealant free of the asphalt the entire loop, 4 ft by 10 ft and the access run. The knife was one extremely dull knife and blade was even thinner.Left the materials in the cutout and called the owner said I will return the morning finish.
I finished the job, proper wire, three loops of wire, twisted at the entry point, pulled through the conduit and connected. Gate tested!!! Then sealed the cutout and properly protecting wire, everybody was happy.
I thought I had kept the Combo blade, but searching my tool box it was not found, but did the PE (pictured above)
Two months later, the home owner awarded the firm I worked for contracts for 8 parking structures he owned in BLOOMINGTON, Terry Haute and Indy. Plus new equipment at four of them.
Never got a thank you from my bosses, left them for retirement the following June.For the record, I would have used my normal edc knife to do the job, but fortunately I did not have toš¤Ŗ.
Challenge favorite (to date)
[attach id=1 msg=2565048]
Case and Opinel Outdoor[attach id=2 msg=2565048]
My most flavorful, included testing the OHT & Opinel.


-
@LoopCutter said:
For the record, I would have used my normal edc knife to do the job, but fortunately I did not have toš¤Ŗ.Enjoyed that story!
There is something to be said for carrying a knife you donāt mind destroying if necessary.
-
Wow! That's a story to remember.
-
That was a good story. I could see it as if I were there. I don't have any intention of butting in on your challenge. Just saying that I have been following along and enjoying the photos and posts. I did this one last year. It gave me an opportunity to carry one partially serrated Gerber that I had for ages but never carried at all. Then I got to carry a partially serrated Wingman as well. I like the idea of a challenge where you can use so many different sorts of tools. SAKs, all sorts of plier based multis, many other knives. Congrats to friend ElevenBlade for putting on an interesting show. Best wishes. Gary (IMR)

-
@LoopCutter said:
Day 25 + mini challenge + favorite picture to another thread.This mini was a tough one for me. I had been taught to always treat a knife with respect. My fix blade farm knifeās I sharpened from a blank and put to scraps of wood and shaped the handle were crude, put served me well. In fact my first pocket knife a Japan trapper, with its two blades is still with me from the summer I was 8 yo and snuck to a small village about five miles away on my bike and bought still is in working order. It cleaned rabbits, pheasants I hunted after school, muskrats I trapped on my grandparents drainage ditches, and CC leaned many a fish caught during the summers and winters ice fishing on SATURDAYS with my DAD. Considering that I am now 72, were are approaching 64 years of service.
I will admit, combo edges I thought were novelty items sold as tactical gear. I have changed my opinion, they are practical in some situations and I have about a half a dozen about with 2 favorites for my current needs.
But last night I did recall a time I did use a tactical combo blade incorrectly, I believe it was fate I even had it with me.
Part one. I was working my parking construction gig, installing a gate control panel for semis drivers to access a processing plants loading and unloading docks. It was mid winter, JANUARY thaw, snow was fading fast and walking to the dock doors to use the facilities I found a knife in the mud. Put it in my work coat pocket and did my business, then back tracking through the lot I find another knife, maybe the same area, it too caked with mud and ice as it was packed under the edge of a snow pile. Tossed both items into my truck by the tool box.
Finished the job and while. Customer tested and request codes to be entered I examined my finds. Both were wet, put almost identical truck stop tactical style knives. One had a plain edge (pictured), the other a combo se edge.
They cleaned up nicely, no markings, no model number just no descript knives.[attach id=0 msg=2565048]
PART TWO - Fast forward a month or two, spring is in full swing, a Thursday afternoon 200 miles from home base, been on road since Monday morning, hoping to head toward Indy for the night and some PM WORK. I get a call that there is potential new customer with unknown gate access issues near by the university I just completed my work.
I ventured that direction and met the home owner, actually the ESTATE OWNER! The front gate was a double lane access style, and appeared to have no issues as I past through. The owner in a golf cart says follow meā¦
About a half a mile in the back is a second gate, single lane, swing gate, in the open position. I learned that it was installed last fall, been giving him fits and now will not close and the form that installed is no longer welcome back. Gave me the keys and said can you fix or tell what I need to do.Inspecting I discovered quickly that a safety loop was open, sensing a vehicle was present preventing the gate from closing. Not an easy fix, about 4 hours of work cutting a new loop in the pavement. Took pictures sent to office to send the customer a quote and schedule. In the time it took to put everything together and power down the gate, apparently the wuote was emailed to owner. He drove back out to me and wanted more of an explanation. So I give him an education.
OK I need this fixed asap. I explained I did not have my concrete saw and blades with me. May be possible to rent one if there was a HOMEdepot or LOWES with one two rent. And blades I can buy. That will increase the quote total. Then said well go get your gear and come back SATURDAY!!! I can wait the two weeks the quote says. I am in a pickle, my anniversary was that SATURDAY, our fortieth. Kids planned a party.It was already 4pm. Took the covers off the controller, traced wires to a conduit, snaked it and popped out on the edge of the drive. Dug with a screwdriver and found the conduit but more importantly the loop wires and brushing the blacktop found the loop cut and then the entire loop that had been sealed after installation.
Told the owner, I may be able to cut out the present broken loop and not have to cut a new loop. It will take longer but if goes as planned I have it working by tomorrow. But it will be T & M and the quote will not apply. Plus my expenses for tonight. He approves.
I went to work. The big problem was the installer used size 18 wire not 14. So pulling it out by hand was not going to work, plus instead of three turns they used only two turns.
The found knives come to mind, I am going try cutting the loop sealant from the asphalt. Will ruin the blades no big deal. By seven pm the COMBO BLADE folder was
Beat to heck, had cut sealant free of the asphalt the entire loop, 4 ft by 10 ft and the access run. The knife was one extremely dull knife and blade was even thinner.Left the materials in the cutout and called the owner said I will return the morning finish.
I finished the job, proper wire, three loops of wire, twisted at the entry point, pulled through the conduit and connected. Gate tested!!! Then sealed the cutout and properly protecting wire, everybody was happy.
I thought I had kept the Combo blade, but searching my tool box it was not found, but did the PE (pictured above)
Two months later, the home owner awarded the firm I worked for contracts for 8 parking structures he owned in BLOOMINGTON, Terry Haute and Indy. Plus new equipment at four of them.
Never got a thank you from my bosses, left them for retirement the following June.For the record, I would have used my normal edc knife to do the job, but fortunately I did not have toš¤Ŗ.
Challenge favorite (to date)
[attach id=1 msg=2565048]
Case and Opinel Outdoor[attach id=2 msg=2565048]
My most flavorful, included testing the OHT & Opinel.
Wonderful story. This is what it's all about for me - stories!. When I was younger I associated combo edge knives with "every day carry" as opposed to truck stop knives for some reason.
I know you're never supposed to use your knife as a screwdriver. But that didn't stop us from trying
The very first time I got my hands on a pliers based multitool - I needed a screwdriver, but as we did in those days, I asked my friend to borrow his knife. He said "I don't have it on me, but I have this leatherman". So I said - "oh what I really need is a screwdriver, so that would be even better".He looked at me like I had just dumped fertilizer in his corn flakes and said - "so you were planning on using my knife as a screwdriver?"

So I said "well that's what we usually do.... "

Now that I know better, I don't do such things

-
I apologize for the autocorrect errors in the details above.
Yes. You never forget the strange jobs. Pulling fairly fresh loop out of concrete is not that difficult, even with incorrect wire, as the sealant forms to the shape of the cutout, about 3/8ā wide and 1-1/2ā deep.
In asphalt, it is porous and the sealant is absorbs into the wall around the gravel material, that is used to mix the batch.Be the low man on the ladder, cutting loops was a given! It was dirty and dusty work. Sometimes wet cutting is mandatory. Minimum 2 loops per lane, about 4 hours per lane. I had gotten efficient and some days 2.5 hours a lane. Freezing weather the worst, as the sealant had to be kept warm, laying out of dashboard helped but some days the tube for freeze before empty. Each tube was 32oz.
In my 8 years of more I estimated I cut a thousand loops and was grateful when I was not assigned loops a given week. I was 66 when I retired.
Some sites like new hospitals, airports, a total of 120 or more loops on a single site. Parking garages with count systems involved 4 loops per lane.So now you know why my user nameš¤Ŗ. Joined MTo to learn about my ST300 during hotel stays Monday thru Friday.
-
HA! That's a cool origin for your user name.

<u>Day 25 - Mini Challenge</u>
I think we've all used our blades as screwdrivers, chisels, and pry bars at least once in our lifetimes. (Some of us still do.
)My then girlfriend, now wife, and I had just to moved to another apartment and we were trying to make dinner but we couldn't find where we packed the can opener. No worries, I always come prepared for just such an occasion. My Kershaw leek took one for the team just to illustrate. :D
-
Day 26
I learned early today that I had overlooked another tool fitted with a COMBO BLADE! š
My WINGMAN, it has a nice combo blade, sharp and shaped in the similar manner of my SIGNALs.

[attach id=0 msg=2565109]
In my defense, (i feel I owe it an apologyš), the WINGMAN is used primarily as my finger extension on days my digits just will not cooperate. Especially when working with LEGOS or producing artificial purple crawlers for my fishing grandkids.
The SPRING LOADED pliers make my task easier. Also, the scissors work well with the black cord I use to thread the hooks into the crawlers and tie the swivel.
I checked the SIDEKICK, it is a plain edge.

PS: actually LEATHERMAN does do a nice job producing function COMBO BLADES on their tools, as well as full SE secondary blades, very sharp, and stay sharp even after heavy use.

-
@AzteCypher said:
HA! That's a cool origin for your user name.
<u>Day 25 - Mini Challenge</u>
I think we've all used our blades as screwdrivers, chisels, and pry bars at least once in our lifetimes. (Some of us still do.
)My then girlfriend, now wife, and I had just to moved to another apartment and we were trying to make dinner but we couldn't find where we packed the can opener. No worries, I always come prepared for just such an occasion. My Kershaw leek took one for the team just to illustrate. :D
That there is the reason that I awlways carried a SAK for so many years, and joined MTO.
-
@LoopCutter said:
Day 26I learned early today that I had overlooked another tool fitted with a COMBO BLADE! š
My WINGMAN, it has a nice combo blade, sharp and shaped in the similar manner of my SIGNALs.

[attach id=0 msg=2565109]
In my defense, (i feel I owe it an apologyš), the WINGMAN is used primarily as my finger extension on days my digits just will not cooperate. Especially when working with LEGOS or producing artificial purple crawlers for my fishing grandkids.
The SPRING LOADED pliers make my task easier. Also, the scissors work well with the black cord I use to thread the hooks into the crawlers and tie the swivel.
I checked the SIDEKICK, it is a plain edge.

PS: actually LEATHERMAN does do a nice job producing function COMBO BLADES on their tools, as well as full SE secondary blades, very sharp, and stay sharp even after heavy use.
I know what you mean about the finger extender. ⦠I think thatās the best description of what I used to use my original combo edge Cold Steel and SAK for most often. I fell out of the habit, for better or worse, when I started carrying my Leatherman Micra which is more finicky to open.
-
@ElevenBlade said:
That there is the reason that I awlways carried a SAK for so many years, and joined MTO.Silly part was I knew I had my Tinker somewhere... in one of those packed boxes.

-
-
@AzteCypher said:
<u>Day 26</u>Breaking out my Wenger Ranger 106 for the rest of this challenge. This is supposed to be a beast of a knife in my pocket however, I didn't feel it most of the time. Even when I sat down it seemed to disappear in my pocket. Here it is helping me open a new jump pack.
I need to get a jumper. There are so many options that I donāt know where to start! :ahhh
-
@ElevenBlade said:
I need to get a jumper. There are so many options that I donāt know where to start! :ahhhDepending on your vehicle type and amount of electronics, I recommend one with most cranking amps.
Strange to me, is that the feature I use most is the tire inflator. My KIA SORENTO is AWD and the sensors detect the smallest change in tire pressure, even from temperature changes, as fall 32° to a drop of 20°, may affect a two or three psi difference in one or two tires. Then best to fill all four to 34 or 36psi.
Works like a champ.AWD requires each tire to be same diameter and same pressure. If one tire goes bad it is suggested you replace all four.
Just my experience.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better š
Register Login




